[prev in list] [next in list] [prev in thread] [next in thread]
List: freeradius-users
Subject: Re: COA NAK simulation from server using radclient
From: Alan DeKok <aland () deployingradius ! com>
Date: 2021-03-30 12:01:17
Message-ID: A27CA4B9-9743-4415-B8E1-3F0FE3AAC076 () deployingradius ! com
[Download RAW message or body]
On Mar 30, 2021, at 6:27 AM, tejeswi <teju.knl@gmail.com> wrote:
> Please note that we tried almost all possible ways to simulate COA NAk form
> server POV but no luck.
So... what did you try? What was the result?
We're not mind readers or magicians. If your question is "I did stuff, but it \
didn't work". The only real response is "do different stuff".
If you post detailed questions which explain things, we can give detailed answers.
As for the debug output...
> Listening on coa address 192.167.3.6 port 2010 bound to server default
No, that is NOT what the documentation says to do. Go read \
raddb/sites-available/coa
This is fully documented.
> (0) Received CoA-Request Id 111 from 192.167.3.31:2000 to 192.167.3.6:2010 length \
> 119 (0) User-Name = "radiususer"
> (0) User-Password = "\372\3574jT'C\034\3273\216\241J\235ϱ"
> (0) NAS-Identifier = "radiusServerNode"
> (0) Message-Authenticator = 0x77cec9b9750b9f8f947aeb711b614550
> (0) Called-Station-Id = "Rclient1.radius.com"
> (0) Acct-Status-Type = Start
> (0) Acct-Session-Id = "1000"
> (0) Sent CoA-ACK Id 111 from 192.167.3.6:2010 to 192.167.3.31:2000 length 0
> (0) Finished request
You will note that the server doesn't actually *do* anything. There's no output \
that it's processing the packet, running modules, etc. This should be a strong hint \
that the configuration is completely broken.
Read the documentation. Do what it says. It will work.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic