[prev in list] [next in list] [prev in thread] [next in thread]
List: freeradius-users
Subject: RE: Cisco phones loosing connectivity with VMPS and IOS upgrade to 15.0(1)SE2
From: Brian Julin <BJulin () clarku ! edu>
Date: 2012-05-31 14:45:34
Message-ID: 88ACDECA21EE5B438CA26316163BC14C018C2D () BASS ! ad ! clarku ! edu
[Download RAW message or body]
> Kaya Saman wrote:
> I will perform a wireshark and tcpdump packet capture this evening in
> order to try to debug more clearly what is going on between the
> devices however, in the mean time I was wondering if there was some
> sort of interoperability quircks between newer Cisco IOS releases and
> FreeRADIUS (VMPS)??
Likely the CISCO decided to change the way they interpret the
tunnel-group-id attribute.
There are two ways to pass this attribute (normally, and using a
cisco vendor specific attribute.)
There are three ways the switch may interpret the string contained therein.
1) numerically
2) vlan name
3) vlan group name
> Can anyone suggest anything?
Play with different combinations of the above.
Also verify that all the global and interface commands which are
applied on a working 12.2 switch remain applied on 15.0. Sometimes
command syntax changes and the commands get rejected on upgrade.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic