[prev in list] [next in list] [prev in thread] [next in thread]
List: freeradius-users
Subject: Re: Hints File and Users file and (One More Problem?)
From: <tnt () kalik ! co ! yu>
Date: 2007-06-28 14:14:46
Message-ID: ZA7kyyD1.1183040086.7127910.tnt () kalik ! co ! yu
[Download RAW message or body]
That's normal. radtest doesn't send Service-Type in the request so it
can't get those replies. You can use radclent to test with attributes.
You should add Service-Type as a reply as well:
DEFAULT Service-Type == Framed-User
Service-Type = Framed-User,
Framed-Protocol = PPP, ...
Ivan Kalik
Kalik Informatika ISP
Dana 28/6/2007, "Jeff" <jeffa@jahelpdesk.com> piše:
> I have a fast question I created this in the users file and reloaded config as \
> instructed
> using radtest i tryed a login request, the default group wasn't added to login
> using radius -X is showing nothing accept see below
>
> what I have for default users file at the top
> -----
> DEFAULT Service-Type == Framed-User
> Framed-Protocol = PPP,
> Session-Timeout = 18000,
> Ascend-Data-Filter += "ip in forward tcp est",
> Ascend-Data-Filter += "ip in forward dstip *.*.*.*/32", <-----removed ip addreesses \
> for being posted here Ascend-Data-Filter += "ip in forward dstip *.*.*.*/32", \
> <-----removed ip addreesses for being posted here Ascend-Data-Filter += "ip in \
> forward dstip *.*.*.*/32", <-----removed ip addreesses for being posted here \
> Ascend-Data-Filter += "ip in forward dstip *.*.*.*/32", <-----removed ip \
> addreesses for being posted here Ascend-Data-Filter += "ip in drop tcp dstport = \
> 25", <-----removed ip addreesses for being posted here Ascend-Data-Filter += "ip \
> in forward", Port-Limit = 1
> -----
> Test User in users file
>
> testuser Password = "justatest"
> Fall-Through = Yes
>
> -----
>
> Heres all that is posted back and as i said using radiusd -x only shows this much \
> also stopping at Nas-Port
>
> radius:/home/jeffa # radtest testuser@test.realm justatest localhost testing123
> Sending Access-Request of id 29 to 70.62.12.98 port 1645
> User-Name = "testuser@test.realm"
> User-Password = "justatest"
> NAS-IP-Address = 255.255.255.255
> NAS-Port = 10
> rad_recv: Access-Accept packet from host localhost:1645, id), length
>
>
> _____
>
> From: Jeff [mailto:jeffa@jahelpdesk.com]
> To: FreeRadius users mailing list [mailto:freeradius-users@lists.freeradius.org]
> Sent: Thu, 28 Jun 2007 09:22:27 -0400
> Subject: Re: Hints File and Users file and I am lost
>
>
> gotcha thanks
> _____
>
> From: Alan DeKok [mailto:aland@deployingradius.com]
> To: FreeRadius users mailing list [mailto:freeradius-users@lists.freeradius.org]
> Sent: Thu, 28 Jun 2007 08:50:45 -0400
> Subject: Re: Hints File and Users file and I am lost
>
> Jeff wrote:
> > could i do a attr_rewrite to fix the ascend being written long and
> > place it in ost process section?
>
> No.
>
> Fix the files written by your billing software to be correct, OR
> create entries yourself that follow the documented format.
>
> Alan DeKok.
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
>
>
>
>
>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic