[prev in list] [next in list] [prev in thread] [next in thread]
List: freeradius-users
Subject: Re: FreeRADIUS - 802.1x WPA-TKIP, WPA2-AES settings
From: Damjan <gdamjan () mail ! net ! mk>
Date: 2005-10-28 22:27:46
Message-ID: 20051028222746.GB17590 () legolas ! on ! net ! mk
[Download RAW message or body]
> add to it: forward the DHCPDISCOVER to the DS if no internal table entry
> for this MAC is found. yapp, that would be even very easy to integrate.
>
> but i don't think that _any_ AP does that.
Well, an AP that does 802.1x + chillispot is all you need :)
You get the accounting, bandwidth shapping and traffic limits for free
> >>just for the case: no, it is
> >>NOT possible to assign IP addresses by 802.1X; you have to do DHCP after
> >>the authentication (yes, it is strange).
> >
> >
> >A clever AP could support this:
> >1. Serving DHCP to the wireless netowork only
> >2. Getting the Framed-IP-Address from the radius Access-Accept, and
> >putting it in a internal table (MAC -> IP)
> >3. Serving that exact IP via DHCP when the subsciber asks for a lease.
> >
> >I don't know of an AP that does that, though.
> >
> >
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
--
damjan | дамјан
This is my jabber ID --> damjan@bagra.net.mk <-- not my mail address!!!
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic