[prev in list] [next in list] [prev in thread] [next in thread]
List: freeradius-users
Subject: Re: max 6000 ?
From: Mike Tancsa <mike () sentex ! net>
Date: 2001-05-24 15:00:43
[Download RAW message or body]
At 10:47 AM 5/24/01 -0400, aland@striker.ottawa.on.ca wrote:
>Mike Tancsa <mike@sentex.net> wrote:
> > Anyone using a Max 6000 and FreeRADIUS ? If so any particular tricks to
> get
> > it to work ?
>
> No. Once you set things up, it should work fine.
>
> > All I am seeing when running it via radius -x for accounting is
>
> > rad_recv: Accounting-Request packet from host 192.168.1.1:1644, id=0,
> > length=210
> > Request packet code 4 sent to accounting port from client silicon:1644
> - ID
> > 0 : IGNORED
>
> Hmm... from looking at the code, the log message is incorrect.
>
> What's happening is that it's getting an Accounting-Request packet
>on a port which is NOT an accounting port.
>
> Update your NAS to send access requests to 1812, and accounting
>requests to 1813.
OK, this was the problem. Strangely enough, I had the unit set to 16bit
VSA, and _accounting_ on port 1645. For some reason this was working with
the old cistron radius. I set it to 1646, and all is working now as expected.
Thanks,
---Mike
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic