[prev in list] [next in list] [prev in thread] [next in thread] 

List:       freenx-knx
Subject:    Re: [FreeNX-kNX] Connection without encryption problem
From:       "Fabian Franz" <FabianFranz () gmx ! de>
Date:       2008-08-26 20:50:07
Message-ID: 20080826205007.322540 () gmx ! net
[Download RAW message or body]

IIRC, that was a client problem, which was fixed in 3.2.0.

Best Wishes,

Fabian

-------- Original-Nachricht --------
> Datum: Mon, 25 Aug 2008 09:28:33 -0300 (BRT)
> Von: ricardomoura@ncs.com.br
> An: freenx-knx@kde.org
> Betreff: [FreeNX-kNX] Connection without encryption problem (full	description)

> Hi,
> 
> Here's the scenario:
> 
> Slackware 12.1
> NX 3.2.0-13
> FreeNX 0.7.3  (Easy install method)
> Server IP: 192.168.200.4 (needed to understand bellow explanation)
> 
> It works fine with encryption *enabled*, but when i turn encryption off it
> only works when connecting locally (127.0.0.1). If i try to connect from
> another machine (located on the same network) the connection fails:
> 
> LOG from the client:(192.168.200.254)
> 
> NXPROXY - Version 3.1.0
> 
> Copyright (C) 2001, 2007 NoMachine.
> See http://www.nomachine.com/ for more information.
> 
> Info: Proxy running in client mode with pid '25374'.
> Session: Starting session at 'Mon Aug 25 09:19:39 2008'.
> Info: Connecting to remote host '192.168.200.254:5000'.
> Info: Aborting the procedure due to signal '15'.
> Session: Session terminated at 'Mon Aug 25 09:20:10 2008'.
> 
> ===========================================================
> 
> See it ? the client tries to connect to itself, when it should be
> connecting to the server: 192.168.200.4 - It only happen when i turn off
> encryption in the configuration options. (btw: i'm using the client from
> nomachine)
> 
> Hope it helps solving this problem.
> 
> TIA.
> Ricardo Moura
> 
> ________________________________________________________________
>      Were you helped on this list with your FreeNX problem?
>     Then please write up the solution in the FreeNX Wiki/FAQ:
> 
> http://openfacts2.berlios.de/wikien/index.php/BerliosProject:FreeNX_-_FAQ
>   
>          Don't forget to check the NX Knowledge Base:
>                  http://www.nomachine.com/kb/ 
> 
> ________________________________________________________________
>        FreeNX-kNX mailing list --- FreeNX-kNX@kde.org
>       https://mail.kde.org/mailman/listinfo/freenx-knx
> ________________________________________________________________
________________________________________________________________
     Were you helped on this list with your FreeNX problem?
    Then please write up the solution in the FreeNX Wiki/FAQ:

http://openfacts2.berlios.de/wikien/index.php/BerliosProject:FreeNX_-_FAQ
  
         Don't forget to check the NX Knowledge Base:
                 http://www.nomachine.com/kb/ 

________________________________________________________________
       FreeNX-kNX mailing list --- FreeNX-kNX@kde.org
      https://mail.kde.org/mailman/listinfo/freenx-knx
________________________________________________________________
[prev in list] [next in list] [prev in thread] [next in thread] 

Configure | About | News | Add a list | Sponsored by KoreLogic