[prev in list] [next in list] [prev in thread] [next in thread]
List: freenx-knx
Subject: Re: [FreeNX-kNX] NX printing through port 445
From: Alastair Johnson <alastair () solutiontrax ! com>
Date: 2007-12-10 16:58:55
Message-ID: 200712101658.55924.alastair () solutiontrax ! com
[Download RAW message or body]
On Monday 10 December 2007, Prakash Velayutham wrote:
> Hi Fabian,
>
> Once again, thanks.
>
> On Dec 10, 2007, at 11:05 AM, Fabian Franz wrote:
> >> Hi,
> >>
> >>>> Here is all the client-side logs.
> >>
> >> Attached are the files.
> >
> > HELLO NXSERVER - Version 1.5.0-70 OS (GPL)]
> >
> > So your nxserver is putting itself as 1.5.0-70.
> >
> > And in runlog we can find the message: "Server does only support
> > SAMBA forcing port 139." There yo uahve it.
> >
> > It needs to read 2.1.0-71, because that (choose of protocol) is why
> > I bumped the version number to 2.1.0.
>
> I get this on the server, though.
>
> mannose:~ # rpm -qa | grep NX
> NX-2.1.0-127.1
> FreeNX-0.7.1-1.1
> mannose:~ #
>
> Should I just remove and reinstall both NX and FreeNX?
This should be set in nxloadconfig:
NX_VERSION=2.1.0-71
I know the RPMs have some aspects of nxloadconfig changed from the normal
values so things work smoothly on the distro. This one may be a historical
mistake, or may be deliberate because of the allowable nx version in
dependencies. It may also be overridden in /etc/nxserver/node.conf, or
because you somehow have an older nxloadconfig somewhere.
>
> > cu
> >
> > Fabian
>
> Thanks,
> Prakash
> ________________________________________________________________
> Were you helped on this list with your FreeNX problem?
> Then please write up the solution in the FreeNX Wiki/FAQ:
> http://openfacts.berlios.de/index-en.phtml?title=FreeNX_FAQ
> Don't forget to check the NX Knowledge Base:
> http://www.nomachine.com/kb/
>
> ________________________________________________________________
> FreeNX-kNX mailing list --- FreeNX-kNX@kde.org
> https://mail.kde.org/mailman/listinfo/freenx-knx
> ________________________________________________________________
________________________________________________________________
Were you helped on this list with your FreeNX problem?
Then please write up the solution in the FreeNX Wiki/FAQ:
http://openfacts.berlios.de/index-en.phtml?title=FreeNX_FAQ
Don't forget to check the NX Knowledge Base:
http://www.nomachine.com/kb/
________________________________________________________________
FreeNX-kNX mailing list --- FreeNX-kNX@kde.org
https://mail.kde.org/mailman/listinfo/freenx-knx
________________________________________________________________
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic