[prev in list] [next in list] [prev in thread] [next in thread]
List: freediameter-help
Subject: [Help] Error-Message content: 'No suitable candidate to route the message to'
From: marko.stojakovic () amres ! ac ! rs (=?UTF-8?Q?Marko_Stojakovi=C4=87?=)
Date: 2012-09-20 11:00:49
Message-ID: 011201cd971f$314e2e40$93ea8ac0$ () amres ! ac ! rs
[Download RAW message or body]
Sebastien,
I am not sure if I can control advertized applications in radiator, but I will check.
Thank you very much!
Best regards,
Marko Stojakovic
From: Sebastien Decugis [mailto:sdecugis at freediameter.net]
Sent: Wednesday, September 19, 2012 10:57 PM
To: Support for the freeDiameter implementation.
Cc: Marko Stojakovi?
Subject: Re: [Help] Error-Message content: 'No suitable candidate to route the \
message to'
Hi Marko,
It seems your radiator server is only advertizing support for applications 1 and 3 \
during the CER/CEA exchange; therefore the converted Diameter EAP message \
(application 5) cannot be routed to this peer. Can you control the advertized \
applications in radiator?
Best regards,
Sebastien.
Le 2012/09/19 18:21, Marko Stojakovi? a ?crit :
Hello,
I have a problem with relaying Diameter authentication requests from Freediameter to \
Radiator server that is configured as a Diameter-to-Radius gateway.
Here are the server names and explanations:
server1.rcub.rs (192.168.13.10) : Freediameter configured as a radius-to-diameter \
gateway
server2.amres.rs (192.168.13.11) : Radiator server, configured as a \
diameter-to-radius gateway
The idea is to use eapol_test on the server1 to generate EAP-TLS Radius \
authentication request (with username marko at amres.rs) and send it to localhost.
Then, the Freediameter should convert this request to Diameter protocol and relay it \
to server2;
Step1: When I start the servers I see that the Diameter connection is established ? \
on Freediameter (server1) the message is:
| tid:Receiver (20) SCTP/noTLS) 09/18/12,13:40:49.286447 in \
fd_sctp_recvmeta@/tmp/freeDiameter/libfdcore/sctp.c:1230
| Received 60b data on socket 20 (stream ignored)
| tid:PSM/server2.amres.rs 09/18/12,13:40:49.286475 in \
p_psm_th@/tmp/freeDiameter/libfdcore/p_psm.c:429
| 'STATE_OPEN' <-- 'FDEVP_CNX_MSG_RECV' (0x839c270,60) \
'server2.amres.rs'
Received 60b from 'server2.amres.rs' (STATE_OPEN)
Logged: 09/18/12,13:40:49.286501
The whole message from ?freeDiameterd ?c freediameter.conf -ddd? is in the attachment \
(state_open.txt).
Step2: Then, when I use eapol_test to send radius message to Freediameter for \
converting it to diameter and relaying, the Freediameter brakes. This is the message \
I get:
[auth.rgwx] Error-Message content: 'No suitable candidate to route the message to'
The whole message from ?freeDiameterd ?c freediameter.conf -ddd? is in the attachment \
(Aborted.txt).
Also I am sending freediameter.conf and rgw.conf in attach.
Could you help me with this problem?
Best regards,
Marko Stojakovic
_______________________________________________
Help mailing list
Help at freediameter.net
http://lists.freediameter.net/cgi-bin/mailman/listinfo/help
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freediameter.net/pipermail/help/attachments/20120920/8abdece1/attachment-0001.html>
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic