[prev in list] [next in list] [prev in thread] [next in thread]
List: freedesktop-xorg
Subject: Re: No screen, no prompt
From: Chris Fisichella <christopher.j.fisichella () gmail ! com>
Date: 2021-05-23 16:32:45
Message-ID: CAKGxq81ov5MPy77UYQBmdtO8khsxB2CBkH-TaUjQm7Ev66JbWw () mail ! gmail ! com
[Download RAW message or body]
[Attachment #2 (multipart/alternative)]
On Sun, May 23, 2021 at 11:44 AM IL Ka <kazakevichilya@gmail.com> wrote:
> I do not have experience with R128 driver, unfortunately.
>
> > [ 32.360] (II) R128(0): initializing int10
> > [ 32.361] (EE) R128(0): V_BIOS address 0x35d70 out of range
>
> I believe that means the card can't emulate the old Video BIOS interface.
> It shouldn't prevent it from working
>
> > [ 32.362] (WW) R128(0): DDC2/I2C is not properly initialized
> > [ 32.362] (WW) R128(0): DDC2/I2C is not properly initialized
> > [ 32.362] (II) R128(0): EDID for output VGA-0
> > [ 32.363] (II) R128(0): Output VGA-0 disconnected
> > [ 32.363] (WW) R128(0): No outputs definitely connected, trying
> again...
>
> Card can't read EDID from your monitor, hence it doesn't "see" it.
>
> This must be the problem. Let's wait for someone who has experience with
> R128. You can also try another monitor and VGA cable.
> It could be that DDC is broken in this cable.
>
> > [ 33.769] (EE) [drm] drmOpen failed.
> > [ 33.769] (EE) R128(0): [dri] DRIScreenInit failed. Disabling DRI.
> DRM also failed, not sure why.
>
Hi IL KA, Hi Everyone,
Thanks for the debugging you did. I tried another cable and another monitor
and am attaching the latest Xorg.0.log file with the R128 errors in it. I
am not sure about next steps.
Best Regards,
Chris
[Attachment #5 (text/html)]
<div dir="ltr"><div dir="ltr"><br></div><br><div class="gmail_quote"><div dir="ltr" \
class="gmail_attr">On Sun, May 23, 2021 at 11:44 AM IL Ka <<a \
href="mailto:kazakevichilya@gmail.com">kazakevichilya@gmail.com</a>> \
wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px \
0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div \
dir="ltr"><div class="gmail_quote"><div>I do not have experience with R128 driver, \
unfortunately.</div><div> </div>> [ 32.360] (II) R128(0): initializing \
int10<br><div>
>
[ 32.361] (EE) R128(0): V_BIOS address 0x35d70 out of range \
</div><div><br></div><div>I believe that means the card can't emulate the old \
Video BIOS interface. It shouldn't prevent it from \
working</div><div><br></div><div>>
[ 32.362] (WW) R128(0): DDC2/I2C is not properly initialized<br>
>
[ 32.362] (WW) R128(0): DDC2/I2C is not properly initialized<br>
>
[ 32.362] (II) R128(0): EDID for output VGA-0<br>
>
[ 32.363] (II) R128(0): Output VGA-0 disconnected<br>> [ 32.363] (WW) \
R128(0): No outputs definitely connected, trying \
again...<br></div><div><br></div><div>Card can't read EDID from your monitor, \
hence it doesn't "see" it.</div><div><br></div><div>This must be the \
problem. Let's wait for someone who has experience with R128. You can also try \
another monitor and VGA cable.</div><div>It could be that DDC is broken in this \
cable. </div><div><br></div><div>
>
[ 33.769] (EE) [drm] drmOpen failed.<br>> [ 33.769] (EE) R128(0): [dri] \
DRIScreenInit failed. Disabling DRI.<br></div><div>DRM also failed, not sure \
why.</div></div></div></div></blockquote><div><br></div><div>Hi IL KA, Hi \
Everyone,</div><div><br></div><div>Thanks for the debugging you did. I tried another \
cable and another monitor and am attaching the latest Xorg.0.log file with the R128 \
errors in it. I am not sure about next steps. </div><div><br></div><div>Best \
Regards,</div><div>Chris</div></div></div>
["Xorg.0.log" (text/x-log)]
[ 30.886]
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[ 30.886] Build Operating System: Linux 4.19.0-16-amd64 i686 Debian
[ 30.886] Current Operating System: Linux Debian130071 4.19.0-16-686-pae #1 SMP \
Debian 4.19.181-1 (2021-03-19) i686 [ 30.886] Kernel command line: \
BOOT_IMAGE=/vmlinuz-4.19.0-16-686-pae root=/dev/mapper/Debian130071--vg-root ro quiet \
[ 30.886] Build Date: 19 April 2021 09:34:38AM [ 30.886] xorg-server \
2:1.20.4-1+deb10u3 (https://www.debian.org/support) [ 30.886] Current version of \
pixman: 0.36.0 [ 30.886] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 30.886] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 30.886] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 23 12:19:35 2021
[ 30.993] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 31.144] (==) No Layout section. Using the first Screen section.
[ 31.144] (==) No screen section available. Using defaults.
[ 31.144] (**) |-->Screen "Default Screen Section" (0)
[ 31.144] (**) | |-->Monitor "<default monitor>"
[ 31.175] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 31.175] (==) Automatically adding devices
[ 31.175] (==) Automatically enabling devices
[ 31.175] (==) Automatically adding GPU devices
[ 31.175] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 31.284] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 31.284] Entry deleted from font path.
[ 31.409] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 31.409] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 31.409] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 31.409] (II) Loader magic: 0x68a740
[ 31.409] (II) Module ABI versions:
[ 31.409] X.Org ANSI C Emulation: 0.4
[ 31.409] X.Org Video Driver: 24.0
[ 31.409] X.Org XInput driver : 24.1
[ 31.409] X.Org Server Extension : 10.0
[ 31.411] (++) using VT number 7
[ 31.411] (II) systemd-logind: logind integration requires -keeptty and -keeptty \
was not provided, disabling logind integration [ 31.412] (II) xfree86: Adding drm \
device (/dev/dri/card0) [ 31.427] (--) PCI: (0@0:2:0) 8086:2972:1462:7336 rev 2, \
Mem @ 0xfdb00000/1048576, 0xd0000000/268435456, I/O @ 0x0000ff00/8 [ 31.427] (--) \
PCI:*(2@0:0:0) 1002:5446:1002:0029 rev 0, Mem @ 0xf8000000/67108864, \
0xfdcf8000/16384, I/O @ 0x0000ec00/256, BIOS @ 0x????????/131072 [ 31.453] (II) \
LoadModule: "glx" [ 31.498] (II) Loading \
/usr/lib/xorg/modules/extensions/libglx.so [ 31.761] (II) Module glx: \
vendor="X.Org Foundation" [ 31.761] compiled for 1.20.4, module version = 1.0.0
[ 31.761] ABI class: X.Org Server Extension, version 10.0
[ 31.761] (==) Matched ati as autoconfigured driver 0
[ 31.761] (==) Matched modesetting as autoconfigured driver 1
[ 31.761] (==) Matched fbdev as autoconfigured driver 2
[ 31.761] (==) Matched vesa as autoconfigured driver 3
[ 31.761] (==) Assigned the driver to the xf86ConfigLayout
[ 31.761] (II) LoadModule: "ati"
[ 31.775] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 31.790] (II) Module ati: vendor="X.Org Foundation"
[ 31.790] compiled for 1.20.4, module version = 19.0.1
[ 31.790] Module class: X.Org Video Driver
[ 31.790] ABI class: X.Org Video Driver, version 24.0
[ 31.790] (II) LoadModule: "r128"
[ 31.790] (II) Loading /usr/lib/xorg/modules/drivers/r128_drv.so
[ 31.817] (II) Module r128: vendor="X.Org Foundation"
[ 31.817] compiled for 1.20.3, module version = 6.12.0
[ 31.817] Module class: X.Org Video Driver
[ 31.817] ABI class: X.Org Video Driver, version 24.0
[ 31.817] (II) LoadModule: "modesetting"
[ 31.817] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 31.859] (II) Module modesetting: vendor="X.Org Foundation"
[ 31.859] compiled for 1.20.4, module version = 1.20.4
[ 31.859] Module class: X.Org Video Driver
[ 31.859] ABI class: X.Org Video Driver, version 24.0
[ 31.859] (II) LoadModule: "fbdev"
[ 31.859] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 31.904] (II) Module fbdev: vendor="X.Org Foundation"
[ 31.904] compiled for 1.20.0, module version = 0.5.0
[ 31.904] Module class: X.Org Video Driver
[ 31.904] ABI class: X.Org Video Driver, version 24.0
[ 31.904] (II) LoadModule: "vesa"
[ 31.904] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 31.918] (II) Module vesa: vendor="X.Org Foundation"
[ 31.918] compiled for 1.20.1, module version = 2.4.0
[ 31.919] Module class: X.Org Video Driver
[ 31.919] ABI class: X.Org Video Driver, version 24.0
[ 31.919] (II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
[ 31.919] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 31.920] (II) FBDEV: driver for framebuffer: fbdev
[ 31.920] (II) VESA: driver for VESA chipsets: vesa
[ 31.947] (WW) Falling back to old probe method for modesetting
[ 31.955] (WW) Falling back to old probe method for fbdev
[ 31.955] (II) Loading sub module "fbdevhw"
[ 31.955] (II) LoadModule: "fbdevhw"
[ 31.956] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 31.994] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 31.994] compiled for 1.20.4, module version = 0.0.2
[ 31.994] ABI class: X.Org Video Driver, version 24.0
[ 32.005] (II) modeset(G0): using drv /dev/dri/card0
[ 32.006] (II) R128(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 32.006] (==) R128(0): Depth 24, (--) framebuffer bpp 32
[ 32.006] (==) R128(0): Default visual is TrueColor
[ 32.006] (==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
[ 32.006] (II) R128(0): PCI bus 2 card 0 func 0
[ 32.006] (II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 32.006] (II) R128(0): Acceleration of RENDER operations will be enabled upon \
successful loading of DRI and EXA. [ 32.006] (II) Loading sub module "vgahw"
[ 32.006] (II) LoadModule: "vgahw"
[ 32.006] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 32.053] (II) Module vgahw: vendor="X.Org Foundation"
[ 32.054] compiled for 1.20.4, module version = 0.1.0
[ 32.054] ABI class: X.Org Video Driver, version 24.0
[ 32.054] (II) R128(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 32.054] (==) R128(0): RGB weight 888
[ 32.054] (II) R128(0): Using 8 bits per RGB (8 bit DAC)
[ 32.054] (II) Loading sub module "int10"
[ 32.054] (II) LoadModule: "int10"
[ 32.054] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 32.113] (II) Module int10: vendor="X.Org Foundation"
[ 32.113] compiled for 1.20.4, module version = 1.0.0
[ 32.113] ABI class: X.Org Video Driver, version 24.0
[ 32.113] (II) R128(0): initializing int10
[ 32.138] (EE) R128(0): V_BIOS address 0x35240 out of range
[ 32.138] (--) R128(0): Chipset: "ATI Rage 128 Pro ULTRA TF (AGP)" (ChipID = \
0x5446) [ 32.138] (--) R128(0): Linear framebuffer at 0xf8000000
[ 32.138] (--) R128(0): MMIO registers at 0xfdcf8000
[ 32.138] (--) R128(0): VideoRAM: 32768 kByte (128-bit SDR SGRAM 1:1)
[ 32.138] (II) Loading sub module "ramdac"
[ 32.138] (II) LoadModule: "ramdac"
[ 32.138] (II) Module "ramdac" already built-in
[ 32.138] (II) Loading sub module "ddc"
[ 32.138] (II) LoadModule: "ddc"
[ 32.138] (II) Module "ddc" already built-in
[ 32.138] (II) Loading sub module "i2c"
[ 32.138] (II) LoadModule: "i2c"
[ 32.138] (II) Module "i2c" already built-in
[ 32.138] (II) Loading sub module "vbe"
[ 32.138] (II) LoadModule: "vbe"
[ 32.138] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 32.182] (II) Module vbe: vendor="X.Org Foundation"
[ 32.182] compiled for 1.20.4, module version = 1.1.0
[ 32.182] ABI class: X.Org Video Driver, version 24.0
[ 32.182] (II) Loading sub module "int10"
[ 32.182] (II) LoadModule: "int10"
[ 32.182] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 32.182] (II) Module int10: vendor="X.Org Foundation"
[ 32.182] compiled for 1.20.4, module version = 1.0.0
[ 32.182] ABI class: X.Org Video Driver, version 24.0
[ 32.182] (II) R128(0): initializing int10
[ 32.183] (EE) R128(0): V_BIOS address 0x35240 out of range
[ 32.184] (II) R128(0): PLL parameters: rf=2700 rd=60 min=12500 max=35000; \
xclk=13400 [ 32.184] (II) R128(0): Found CRT table, assuming VGA connector.
[ 32.185] (II) R128(0): Output VGA-0 has no monitor section
[ 32.185] (WW) R128(0): DDC2/I2C is not properly initialized
[ 32.185] (WW) R128(0): DDC2/I2C is not properly initialized
[ 32.185] (II) R128(0): EDID for output VGA-0
[ 32.185] (II) R128(0): Output VGA-0 disconnected
[ 32.185] (WW) R128(0): No outputs definitely connected, trying again...
[ 32.185] (II) R128(0): Output VGA-0 disconnected
[ 32.185] (WW) R128(0): Unable to find connected outputs - setting 1024x768 \
initial framebuffer [ 32.185] (==) R128(0): DPI set to (96, 96)
[ 32.185] (II) Loading sub module "fb"
[ 32.185] (II) LoadModule: "fb"
[ 32.185] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 32.231] (II) Module fb: vendor="X.Org Foundation"
[ 32.231] compiled for 1.20.4, module version = 1.0.0
[ 32.231] ABI class: X.Org ANSI C Emulation, version 0.4
[ 32.231] (II) R128(0): Loading EXA module...
[ 32.231] (II) Loading sub module "exa"
[ 32.231] (II) LoadModule: "exa"
[ 32.231] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 32.249] (II) Module exa: vendor="X.Org Foundation"
[ 32.249] compiled for 1.20.4, module version = 2.6.0
[ 32.249] ABI class: X.Org Video Driver, version 24.0
[ 32.249] (II) R128(0): Loading EXA module.
[ 32.249] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 32.249] (==) modeset(G0): RGB weight 888
[ 32.249] (==) modeset(G0): Default visual is TrueColor
[ 32.249] (II) Loading sub module "glamoregl"
[ 32.249] (II) LoadModule: "glamoregl"
[ 32.249] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 32.339] (II) Module glamoregl: vendor="X.Org Foundation"
[ 32.339] compiled for 1.20.4, module version = 1.0.1
[ 32.339] ABI class: X.Org ANSI C Emulation, version 0.4
[ 32.957] (II) modeset(G0): glamor X acceleration enabled on Mesa DRI Intel(R) \
946GZ x86/MMX/SSE2 [ 32.957] (II) modeset(G0): glamor initialized
[ 32.986] (II) modeset(G0): Output VGA-1-1 has no monitor section
[ 33.005] (II) modeset(G0): EDID for output VGA-1-1
[ 33.005] (II) modeset(G0): Manufacturer: DEL Model: a00b Serial#: 860631884
[ 33.005] (II) modeset(G0): Year: 2004 Week: 41
[ 33.005] (II) modeset(G0): EDID Version: 1.3
[ 33.005] (II) modeset(G0): Analog Display Input, Input Voltage Level: \
0.700/0.700 V [ 33.005] (II) modeset(G0): Sync: Separate
[ 33.005] (II) modeset(G0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 33.005] (II) modeset(G0): Gamma: 2.20
[ 33.005] (II) modeset(G0): DPMS capabilities: StandBy Suspend Off; RGB/Color \
Display [ 33.005] (II) modeset(G0): Default color space is primary color space
[ 33.005] (II) modeset(G0): First detailed timing is preferred mode
[ 33.005] (II) modeset(G0): redX: 0.640 redY: 0.340 greenX: 0.279 greenY: 0.619
[ 33.005] (II) modeset(G0): blueX: 0.140 blueY: 0.069 whiteX: 0.310 whiteY: \
0.330 [ 33.005] (II) modeset(G0): Supported established timings:
[ 33.005] (II) modeset(G0): 720x400@70Hz
[ 33.005] (II) modeset(G0): 640x480@60Hz
[ 33.005] (II) modeset(G0): 640x480@75Hz
[ 33.005] (II) modeset(G0): 800x600@60Hz
[ 33.005] (II) modeset(G0): 800x600@75Hz
[ 33.005] (II) modeset(G0): 1024x768@60Hz
[ 33.005] (II) modeset(G0): 1024x768@75Hz
[ 33.005] (II) modeset(G0): 1280x1024@75Hz
[ 33.005] (II) modeset(G0): Manufacturer's mask: 0
[ 33.005] (II) modeset(G0): Supported standard timings:
[ 33.005] (II) modeset(G0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 33.005] (II) modeset(G0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 33.005] (II) modeset(G0): Supported detailed timing:
[ 33.005] (II) modeset(G0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 33.005] (II) modeset(G0): h_active: 1280 h_sync: 1328 h_sync_end 1440 \
h_blank_end 1688 h_border: 0 [ 33.005] (II) modeset(G0): v_active: 1024 v_sync: \
1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 [ 33.005] (II) modeset(G0): \
Serial No: U49314A73L3L [ 33.006] (II) modeset(G0): Monitor name: DELL E173FP
[ 33.006] (II) modeset(G0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 80 \
kHz, PixClock max 145 MHz [ 33.006] (II) modeset(G0): EDID (in hex):
[ 33.006] (II) modeset(G0): 00ffffffffffff0010ac0ba04c334c33
[ 33.006] (II) modeset(G0): 290e010368221b78eecaf6a357479e23
[ 33.006] (II) modeset(G0): 114f54a54b00714f8180010101010101
[ 33.006] (II) modeset(G0): 010101010101302a009851002a403070
[ 33.006] (II) modeset(G0): 1300520e1100001e000000ff00553439
[ 33.006] (II) modeset(G0): 3331344137334c334c0a000000fc0044
[ 33.006] (II) modeset(G0): 454c4c204531373346500a20000000fd
[ 33.006] (II) modeset(G0): 00384b1f500e000a20202020202000bc
[ 33.006] (II) modeset(G0): Printing probed modes for output VGA-1-1
[ 33.006] (II) modeset(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 \
1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 33.006] (II) modeset(G0): \
Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync \
+vsync (80.0 kHz e) [ 33.006] (II) modeset(G0): Modeline "1152x864"x75.0 108.00 \
1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 33.006] (II) \
modeset(G0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 \
+hsync +vsync (60.0 kHz e) [ 33.006] (II) modeset(G0): Modeline "1024x768"x60.0 \
65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 33.006] \
(II) modeset(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 \
+hsync +vsync (46.9 kHz e) [ 33.006] (II) modeset(G0): Modeline "800x600"x60.3 \
40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 33.006] (II) \
modeset(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync \
-vsync (37.5 kHz e) [ 33.006] (II) modeset(G0): Modeline "640x480"x59.9 25.18 \
640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 33.006] (II) \
modeset(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync \
+vsync (31.5 kHz e) [ 33.006] (==) modeset(G0): Using gamma correction (1.0, 1.0, \
1.0) [ 33.006] (==) modeset(G0): DPI set to (96, 96)
[ 33.006] (II) Loading sub module "fb"
[ 33.006] (II) LoadModule: "fb"
[ 33.007] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 33.007] (II) Module fb: vendor="X.Org Foundation"
[ 33.007] compiled for 1.20.4, module version = 1.0.0
[ 33.007] ABI class: X.Org ANSI C Emulation, version 0.4
[ 33.007] (II) UnloadModule: "fbdev"
[ 33.007] (II) Unloading fbdev
[ 33.007] (II) UnloadSubModule: "fbdevhw"
[ 33.007] (II) Unloading fbdevhw
[ 33.007] (II) UnloadModule: "vesa"
[ 33.007] (II) Unloading vesa
[ 33.210] (==) modeset(G0): Backing store enabled
[ 33.210] (==) modeset(G0): Silken mouse enabled
[ 33.238] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[ 33.239] (==) modeset(G0): DPMS enabled
[ 33.240] (II) modeset(G0): [DRI2] Setup complete
[ 33.240] (II) modeset(G0): [DRI2] DRI driver: i965
[ 33.240] (II) modeset(G0): [DRI2] VDPAU driver: i965
[ 33.377] drmOpenDevice: node name is /dev/dri/card0
[ 33.377] drmOpenDevice: open result is 16, (OK)
[ 33.377] drmOpenDevice: node name is /dev/dri/card0
[ 33.377] drmOpenDevice: open result is 16, (OK)
[ 33.377] drmOpenByBusid: Searching for BusID pci:0000:02:00.0
[ 33.377] drmOpenDevice: node name is /dev/dri/card0
[ 33.377] drmOpenDevice: open result is 16, (OK)
[ 33.377] drmOpenByBusid: drmOpenMinor returns 16
[ 33.377] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 33.377] drmOpenByBusid: drmGetBusid reports
[ 33.377] drmOpenDevice: node name is /dev/dri/card1
[ 33.381] drmOpenByBusid: drmOpenMinor returns -1
[ 33.381] drmOpenDevice: node name is /dev/dri/card2
[ 33.386] drmOpenByBusid: drmOpenMinor returns -1
[ 33.386] drmOpenDevice: node name is /dev/dri/card3
[ 33.390] drmOpenByBusid: drmOpenMinor returns -1
[ 33.390] drmOpenDevice: node name is /dev/dri/card4
[ 33.394] drmOpenByBusid: drmOpenMinor returns -1
[ 33.394] drmOpenDevice: node name is /dev/dri/card5
[ 33.399] drmOpenByBusid: drmOpenMinor returns -1
[ 33.399] drmOpenDevice: node name is /dev/dri/card6
[ 33.403] drmOpenByBusid: drmOpenMinor returns -1
[ 33.403] drmOpenDevice: node name is /dev/dri/card7
[ 33.407] drmOpenByBusid: drmOpenMinor returns -1
[ 33.407] drmOpenDevice: node name is /dev/dri/card8
[ 33.412] drmOpenByBusid: drmOpenMinor returns -1
[ 33.412] drmOpenDevice: node name is /dev/dri/card9
[ 33.416] drmOpenByBusid: drmOpenMinor returns -1
[ 33.416] drmOpenDevice: node name is /dev/dri/card10
[ 33.421] drmOpenByBusid: drmOpenMinor returns -1
[ 33.421] drmOpenDevice: node name is /dev/dri/card11
[ 33.425] drmOpenByBusid: drmOpenMinor returns -1
[ 33.425] drmOpenDevice: node name is /dev/dri/card12
[ 33.429] drmOpenByBusid: drmOpenMinor returns -1
[ 33.429] drmOpenDevice: node name is /dev/dri/card13
[ 33.434] drmOpenByBusid: drmOpenMinor returns -1
[ 33.434] drmOpenDevice: node name is /dev/dri/card14
[ 33.438] drmOpenByBusid: drmOpenMinor returns -1
[ 33.438] drmOpenDevice: node name is /dev/dri/card15
[ 33.442] drmOpenByBusid: drmOpenMinor returns -1
[ 33.442] drmOpenDevice: node name is /dev/dri/card0
[ 33.442] drmOpenDevice: open result is 16, (OK)
[ 33.442] drmOpenDevice: node name is /dev/dri/card1
[ 33.447] drmOpenDevice: node name is /dev/dri/card2
[ 33.451] drmOpenDevice: node name is /dev/dri/card3
[ 33.456] drmOpenDevice: node name is /dev/dri/card4
[ 33.460] drmOpenDevice: node name is /dev/dri/card5
[ 33.464] drmOpenDevice: node name is /dev/dri/card6
[ 33.469] drmOpenDevice: node name is /dev/dri/card7
[ 33.473] drmOpenDevice: node name is /dev/dri/card8
[ 33.477] drmOpenDevice: node name is /dev/dri/card9
[ 33.482] drmOpenDevice: node name is /dev/dri/card10
[ 33.486] drmOpenDevice: node name is /dev/dri/card11
[ 33.490] drmOpenDevice: node name is /dev/dri/card12
[ 33.495] drmOpenDevice: node name is /dev/dri/card13
[ 33.499] drmOpenDevice: node name is /dev/dri/card14
[ 33.503] drmOpenDevice: node name is /dev/dri/card15
[ 33.508] (EE) [drm] drmOpen failed.
[ 33.508] (EE) R128(0): [dri] DRIScreenInit failed. Disabling DRI.
[ 33.508] (II) R128(0): Filling in EXA memory info
[ 33.508] (II) R128(0): Setting up EXA callbacks
[ 33.508] (II) R128(0): Initializing 2D acceleration engine...
[ 33.508] (II) R128(0): Initializing EXA driver...
[ 33.508] (II) EXA(0): Offscreen pixmap area of 30408704 bytes
[ 33.508] (II) EXA(0): Driver registered support for the following operations:
[ 33.508] (II) Solid
[ 33.508] (II) Copy
[ 33.508] (II) R128(0): EXA Acceleration enabled.
[ 33.508] (==) R128(0): Backing store enabled
[ 33.508] (==) R128(0): Silken mouse enabled
[ 33.508] (II) R128(0): Will use 2 kb for hardware cursor 0 at offset 0x01fffc00
[ 33.508] (==) R128(0): DPMS enabled
[ 33.508] (WW) R128(0): Direct rendering disabled
[ 33.509] (II) Initializing extension Generic Event Extension
[ 33.509] (II) Initializing extension SHAPE
[ 33.510] (II) Initializing extension MIT-SHM
[ 33.511] (II) Initializing extension XInputExtension
[ 33.512] (II) Initializing extension XTEST
[ 33.513] (II) Initializing extension BIG-REQUESTS
[ 33.513] (II) Initializing extension SYNC
[ 33.514] (II) Initializing extension XKEYBOARD
[ 33.515] (II) Initializing extension XC-MISC
[ 33.515] (II) Initializing extension SECURITY
[ 33.516] (II) Initializing extension XFIXES
[ 33.517] (II) Initializing extension RENDER
[ 33.517] (II) Initializing extension RANDR
[ 33.519] (II) Initializing extension COMPOSITE
[ 33.519] (II) Initializing extension DAMAGE
[ 33.520] (II) Initializing extension MIT-SCREEN-SAVER
[ 33.521] (II) Initializing extension DOUBLE-BUFFER
[ 33.521] (II) Initializing extension RECORD
[ 33.522] (II) Initializing extension DPMS
[ 33.522] (II) Initializing extension Present
[ 33.523] (II) Initializing extension DRI3
[ 33.523] (II) Initializing extension X-Resource
[ 33.524] (II) Initializing extension XVideo
[ 33.524] (II) Initializing extension XVideo-MotionCompensation
[ 33.524] (II) Initializing extension SELinux
[ 33.524] (II) SELinux: Disabled on system
[ 33.524] (II) Initializing extension GLX
[ 33.525] (II) AIGLX: Screen 0 is not DRI2 capable
[ 34.731] (II) IGLX: Loaded and initialized swrast
[ 34.731] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 34.731] (II) Initializing extension XFree86-VidModeExtension
[ 34.732] (II) Initializing extension XFree86-DGA
[ 34.732] (II) Initializing extension XFree86-DRI
[ 34.732] (II) Initializing extension DRI2
[ 34.830] (II) modeset(G0): Damage tracking initialized
[ 35.257] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 35.257] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 35.257] (II) LoadModule: "libinput"
[ 35.258] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 35.336] (II) Module libinput: vendor="X.Org Foundation"
[ 35.336] compiled for 1.20.4, module version = 0.28.2
[ 35.336] Module class: X.Org XInput Driver
[ 35.336] ABI class: X.Org XInput driver, version 24.1
[ 35.337] (II) Using input driver 'libinput' for 'Power Button'
[ 35.337] (**) Power Button: always reports core events
[ 35.337] (**) Option "Device" "/dev/input/event1"
[ 35.337] (**) Option "_source" "server/udev"
[ 35.371] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 35.371] (II) event1 - Power Button: device is a keyboard
[ 35.372] (II) event1 - Power Button: device removed
[ 35.386] (**) Option "config_info" \
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1" [ 35.386] (II) \
XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ \
35.386] (**) Option "xkb_model" "pc105" [ 35.386] (**) Option "xkb_layout" "us"
[ 35.389] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 35.389] (II) event1 - Power Button: device is a keyboard
[ 35.391] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 35.391] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 35.391] (II) Using input driver 'libinput' for 'Power Button'
[ 35.391] (**) Power Button: always reports core events
[ 35.391] (**) Option "Device" "/dev/input/event0"
[ 35.391] (**) Option "_source" "server/udev"
[ 35.394] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 35.394] (II) event0 - Power Button: device is a keyboard
[ 35.394] (II) event0 - Power Button: device removed
[ 35.410] (**) Option "config_info" \
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event0" [ \
35.410] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id \
7) [ 35.410] (**) Option "xkb_model" "pc105"
[ 35.410] (**) Option "xkb_layout" "us"
[ 35.413] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 35.413] (II) event0 - Power Button: device is a keyboard
[ 35.415] (II) config/udev: Adding input device HDA Intel Rear Mic \
(/dev/input/event7) [ 35.415] (II) No input driver specified, ignoring this \
device. [ 35.415] (II) This device may have been added with another device file.
[ 35.417] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event8)
[ 35.417] (II) No input driver specified, ignoring this device.
[ 35.417] (II) This device may have been added with another device file.
[ 35.418] (II) config/udev: Adding input device HDA Intel Line Out \
(/dev/input/event9) [ 35.418] (II) No input driver specified, ignoring this \
device. [ 35.418] (II) This device may have been added with another device file.
[ 35.419] (II) config/udev: Adding input device HDA Intel Front Headphone \
(/dev/input/event10) [ 35.419] (II) No input driver specified, ignoring this \
device. [ 35.419] (II) This device may have been added with another device file.
[ 35.420] (II) config/udev: Adding input device HDA Digital PCBeep \
(/dev/input/event5) [ 35.420] (II) No input driver specified, ignoring this \
device. [ 35.420] (II) This device may have been added with another device file.
[ 35.421] (II) config/udev: Adding input device HDA Intel Front Mic \
(/dev/input/event6) [ 35.421] (II) No input driver specified, ignoring this \
device. [ 35.421] (II) This device may have been added with another device file.
[ 35.423] (II) config/udev: Adding input device PixA琀 USB Optical Mouse \
(/dev/input/event2) [ 35.423] (**) PixA琀 USB Optical Mouse: Applying InputClass \
"libinput pointer catchall" [ 35.423] (II) Using input driver 'libinput' for \
'PixA琀 USB Optical Mouse' [ 35.423] (**) PixA琀 USB Optical Mouse: always \
reports core events [ 35.423] (**) Option "Device" "/dev/input/event2"
[ 35.423] (**) Option "_source" "server/udev"
[ 35.427] (II) event2 - PixA琀 USB Optical Mouse: is tagged by udev as: Mouse
[ 35.427] (II) event2 - PixA琀 USB Optical Mouse: device is a pointer
[ 35.427] (II) event2 - PixA琀 USB Optical Mouse: device removed
[ 35.458] (**) Option "config_info" \
"udev:/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/0003:093A:2510.0001/input/input5/event2"
[ 35.458] (II) XINPUT: Adding extended input device "PixA琀 USB Optical Mouse" \
(type: MOUSE, id 8) [ 35.458] (**) Option "AccelerationScheme" "none"
[ 35.458] (**) PixA琀 USB Optical Mouse: (accel) selected scheme none/0
[ 35.458] (**) PixA琀 USB Optical Mouse: (accel) acceleration factor: 2.000
[ 35.458] (**) PixA琀 USB Optical Mouse: (accel) acceleration threshold: 4
[ 35.463] (II) event2 - PixA琀 USB Optical Mouse: is tagged by udev as: Mouse
[ 35.463] (II) event2 - PixA琀 USB Optical Mouse: device is a pointer
[ 35.466] (II) config/udev: Adding input device PixA琀 USB Optical Mouse \
(/dev/input/mouse0) [ 35.466] (II) No input driver specified, ignoring this \
device. [ 35.466] (II) This device may have been added with another device file.
[ 35.468] (II) config/udev: Adding input device Dell Dell USB Keyboard \
(/dev/input/event3) [ 35.468] (**) Dell Dell USB Keyboard: Applying InputClass \
"libinput keyboard catchall" [ 35.468] (II) Using input driver 'libinput' for \
'Dell Dell USB Keyboard' [ 35.468] (**) Dell Dell USB Keyboard: always reports \
core events [ 35.468] (**) Option "Device" "/dev/input/event3"
[ 35.468] (**) Option "_source" "server/udev"
[ 35.472] (II) event3 - Dell Dell USB Keyboard: is tagged by udev as: Keyboard
[ 35.472] (II) event3 - Dell Dell USB Keyboard: device is a keyboard
[ 35.472] (II) event3 - Dell Dell USB Keyboard: device removed
[ 35.486] (**) Option "config_info" \
"udev:/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/0003:413C:2105.0002/input/input6/event3"
[ 35.486] (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" \
(type: KEYBOARD, id 9) [ 35.486] (**) Option "xkb_model" "pc105"
[ 35.486] (**) Option "xkb_layout" "us"
[ 35.490] (II) event3 - Dell Dell USB Keyboard: is tagged by udev as: Keyboard
[ 35.490] (II) event3 - Dell Dell USB Keyboard: device is a keyboard
[ 35.492] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 35.492] (II) No input driver specified, ignoring this device.
[ 35.492] (II) This device may have been added with another device file.
[ 48.165] (II) event1 - Power Button: device removed
[ 48.178] (II) event0 - Power Button: device removed
[ 48.194] (II) event2 - PixA琀 USB Optical Mouse: device removed
[ 48.226] (II) event3 - Dell Dell USB Keyboard: device removed
_______________________________________________
xorg@lists.x.org: X.Org support
Archives: http://lists.freedesktop.org/archives/xorg
Info: https://lists.x.org/mailman/listinfo/xorg
Your subscription address: %(user_address)s
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic