[prev in list] [next in list] [prev in thread] [next in thread]
List: freedesktop-xorg
Subject: Configure crtc 3 failed
From: "Laws, Aaron C" <lawsa () indiana ! edu>
Date: 2018-08-15 13:14:54
Message-ID: 00b90f4b4abe4e0abc291a008dad9301 () IN-CCI-D2S13 ! ads ! iu ! edu
[Download RAW message or body]
A while back, I was using the following script to configure my monitors.
#!/bin/sh
xrandr --output eDP-1 --mode 1920x1080 --pos 0x0 --rotate normal \
--output HDMI-1 --primary --mode 1920x1080 --pos 1920x0 --rotate normal =
\
--output DP-1-4 --mode 1920x1080 --pos 3848x0 --rotate normal
But now, I get "xrandr: Configure crtc 3 failed". I've tried many other con=
figurations, but basically any time I try to turn on DP-1-4, I get this err=
or. I've even tried turning it on as a different crtc with no success (the =
error message changes to the crtc that I specified).
When I downgrade to xorg server 19.6 the monitor works fine. I finally move=
d off 19.6 because other things aren't working properly as I keep the rest =
of my system up to date.
My system configuration:
Arch linux, xorg server 1.20.0 (1.20.0-9), xorg-xrandr 1.5.0-1, libxrandr 1=
.5.1-2
Dell precision 7710 on a dell dock with two external DVI-connected monitors=
.
Xrandr; returns
Screen 0: minimum 320 x 200, current 3840 x 1080, maximum 8192 x 8192
eDP-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y =
axis) 382mm x 215mm
1920x1080 60.02*+ 60.01 59.97 59.96 59.93 48.02
1680x1050 59.95 59.88
1400x1050 59.98
1600x900 59.99 59.94 59.95 59.82
1280x1024 60.02
1400x900 59.96 59.88
...snip...
DP-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis=
) 531mm x 299mm
1920x1080 60.00*+
1600x1200 60.00
1680x1050 59.88
1280x1024 75.02 60.02
...snip...
DP-2 disconnected (normal left inverted right x axis y axis)
HDMI-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)
HDMI-3 disconnected (normal left inverted right x axis y axis)
eDP-1-2 disconnected (normal left inverted right x axis y axis)
DP-1-4 connected (normal left inverted right x axis y axis)
1920x1080 60.00 + 59.96 59.93
1920x1200 59.95
1600x1200 65.00 60.00
1680x1050 59.95 59.88
1400x1050 74.76 59.98
1600x900 59.95 59.82
...snip...
DP-1-5 disconnected (normal left inverted right x axis y axis)
DP-1-6 disconnected (normal left inverted right x axis y axis)
VGA-1-1 disconnected (normal left inverted right x axis y axis)
1920x1080 (0x4b) 148.500MHz +HSync +VSync
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.5=
0KHz
v: height 1080 start 1084 end 1089 total 1125 clock 60.0=
0Hz
1920x1080 (0x4d) 173.000MHz -HSync +VSync
h: width 1920 start 2048 end 2248 total 2576 skew 0 clock 67.1=
6KHz
v: height 1080 start 1083 end 1088 total 1120 clock 59.9=
6Hz
1920x1080 (0x4e) 138.500MHz +HSync -VSync
h: width 1920 start 1968 end 2000 total 2080 skew 0 clock 66.5=
9KHz
v: height 1080 start 1083 end 1088 total 1111 clock 59.9=
3Hz
1600x1200 (0x50) 162.000MHz +HSync +VSync
h: width 1600 start 1664 end 1856 total 2160 skew 0 clock 75.0=
0KHz
...snip
Let me know what more information may be helpful or if I should be asking s=
omewhere else. Thanks!
[Attachment #3 (text/html)]
<html xmlns:v="urn:schemas-microsoft-com:vml" \
xmlns:o="urn:schemas-microsoft-com:office:office" \
xmlns:w="urn:schemas-microsoft-com:office:word" \
xmlns:m="http://schemas.microsoft.com/office/2004/12/omml" \
xmlns="http://www.w3.org/TR/REC-html40"> <head>
<meta http-equiv="Content-Type" content="text/html; charset=us-ascii">
<meta name="Generator" content="Microsoft Word 15 (filtered medium)">
<style><!--
/* Font Definitions */
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri",sans-serif;}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:#0563C1;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:#954F72;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal-compose;
font-family:"Calibri",sans-serif;
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;}
@page WordSection1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
</head>
<body lang="EN-US" link="#0563C1" vlink="#954F72">
<div class="WordSection1">
<p class="MsoNormal">A while back, I was using the following script to configure my \
monitors.<o:p></o:p></p> <p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal">#!/bin/sh<o:p></o:p></p>
<p class="MsoNormal">xrandr --output eDP-1 --mode 1920x1080 --pos 0x0 --rotate normal \
\<o:p></o:p></p> <p class="MsoNormal"> --output HDMI-1 --primary --mode \
1920x1080 --pos 1920x0 --rotate normal \<o:p></o:p></p> <p \
class="MsoNormal"> --output DP-1-4 --mode 1920x1080 --pos 3848x0 --rotate \
normal<o:p></o:p></p> <p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal">But now, I get “xrandr: Configure crtc 3 failed”. \
I’ve tried many other configurations, but basically any time I try to turn on \
DP-1-4, I get this error. I’ve even tried turning it on as a different crtc \
with no success (the error message changes to the crtc that I \
specified).<o:p></o:p></p> <p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal">When I downgrade to xorg server 19.6 the monitor works fine. I \
finally moved off 19.6 because other things aren’t working properly as I keep \
the rest of my system up to date.<o:p></o:p></p> <p \
class="MsoNormal"><o:p> </o:p></p> <p class="MsoNormal">My system \
configuration:<o:p></o:p></p> <p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal">Arch linux, xorg server 1.20.0 (1.20.0-9), xorg-xrandr 1.5.0-1, \
libxrandr 1.5.1-2<o:p></o:p></p> <p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal">Dell precision 7710 on a dell dock with two external \
DVI-connected monitors.<o:p></o:p></p> <p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal">Xrandr; returns<o:p></o:p></p>
<p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal">Screen 0: minimum 320 x 200, current 3840 x 1080, maximum 8192 x \
8192<o:p></o:p></p> <p class="MsoNormal">eDP-1 connected primary \
1920x1080+0+0 (normal left inverted right x axis y axis) 382mm x \
215mm<o:p></o:p></p> <p class="MsoNormal"> \
1920x1080 60.02*+ 60.01 \
59.97 59.96 59.93 48.02 \
<o:p></o:p></p> <p class="MsoNormal"> 1680x1050 \
59.95 59.88 <o:p></o:p></p> <p \
class="MsoNormal"> 1400x1050 59.98 \
<o:p></o:p></p> <p class="MsoNormal"> 1600x900 \
59.99 59.94 59.95 59.82 \
<o:p></o:p></p> <p class="MsoNormal"> 1280x1024 \
60.02 <o:p></o:p></p> <p \
class="MsoNormal"> 1400x900 \
59.96 59.88 <o:p></o:p></p> <p \
class="MsoNormal">...snip...<o:p></o:p></p> <p class="MsoNormal">DP-1 disconnected \
(normal left inverted right x axis y axis)<o:p></o:p></p> <p class="MsoNormal">HDMI-1 \
connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 531mm x \
299mm<o:p></o:p></p> <p class="MsoNormal"> \
1920x1080 60.00*+<o:p></o:p></p> <p \
class="MsoNormal"> 1600x1200 60.00 \
<o:p></o:p></p> <p class="MsoNormal"> 1680x1050 \
59.88 <o:p></o:p></p> <p \
class="MsoNormal"> 1280x1024 \
75.02 60.02 <o:p></o:p></p> <p \
class="MsoNormal">...snip...<o:p></o:p></p> <p class="MsoNormal">DP-2 disconnected \
(normal left inverted right x axis y axis)<o:p></o:p></p> <p class="MsoNormal">HDMI-2 \
disconnected (normal left inverted right x axis y axis)<o:p></o:p></p> <p \
class="MsoNormal">DP-3 disconnected (normal left inverted right x axis y \
axis)<o:p></o:p></p> <p class="MsoNormal">HDMI-3 disconnected (normal left inverted \
right x axis y axis)<o:p></o:p></p> <p class="MsoNormal">eDP-1-2 disconnected (normal \
left inverted right x axis y axis)<o:p></o:p></p> <p class="MsoNormal">DP-1-4 \
connected (normal left inverted right x axis y axis)<o:p></o:p></p> <p \
class="MsoNormal"> 1920x1080 60.00 + \
59.96 59.93 <o:p></o:p></p> <p \
class="MsoNormal"> 1920x1200 59.95 \
<o:p></o:p></p> <p class="MsoNormal"> 1600x1200 \
65.00 60.00 <o:p></o:p></p> <p \
class="MsoNormal"> 1680x1050 \
59.95 59.88 <o:p></o:p></p> <p \
class="MsoNormal"> 1400x1050 \
74.76 59.98 <o:p></o:p></p> <p \
class="MsoNormal"> 1600x900 \
59.95 59.82 <o:p></o:p></p> <p \
class="MsoNormal"> ...snip...<o:p></o:p></p> <p class="MsoNormal">DP-1-5 \
disconnected (normal left inverted right x axis y axis)<o:p></o:p></p> <p \
class="MsoNormal">DP-1-6 disconnected (normal left inverted right x axis y \
axis)<o:p></o:p></p> <p class="MsoNormal">VGA-1-1 disconnected (normal left inverted \
right x axis y axis)<o:p></o:p></p> <p class="MsoNormal"> 1920x1080 (0x4b) \
148.500MHz +HSync +VSync<o:p></o:p></p> <p \
class="MsoNormal"> h: width 1920 \
start 2008 end 2052 total 2200 skew 0 clock \
67.50KHz<o:p></o:p></p> <p \
class="MsoNormal"> v: height 1080 start \
1084 end 1089 total 1125 \
clock 60.00Hz<o:p></o:p></p> <p class="MsoNormal"> 1920x1080 (0x4d) \
173.000MHz -HSync +VSync<o:p></o:p></p> <p \
class="MsoNormal"> h: width 1920 \
start 2048 end 2248 total 2576 skew 0 clock \
67.16KHz<o:p></o:p></p> <p \
class="MsoNormal"> v: height 1080 start \
1083 end 1088 total 1120 \
clock 59.96Hz<o:p></o:p></p> <p class="MsoNormal"> 1920x1080 (0x4e) \
138.500MHz +HSync -VSync<o:p></o:p></p> <p \
class="MsoNormal"> h: width 1920 \
start 1968 end 2000 total 2080 skew 0 clock \
66.59KHz<o:p></o:p></p> <p \
class="MsoNormal"> v: height 1080 start \
1083 end 1088 total 1111 \
clock 59.93Hz<o:p></o:p></p> <p class="MsoNormal"> 1600x1200 (0x50) \
162.000MHz +HSync +VSync<o:p></o:p></p> <p \
class="MsoNormal"> h: width 1600 \
start 1664 end 1856 total 2160 skew 0 clock \
75.00KHz<o:p></o:p></p> <p class="MsoNormal">...snip<o:p></o:p></p>
<p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal">Let me know what more information may be helpful or if I should \
be asking somewhere else. Thanks!<o:p></o:p></p> </div>
</body>
</html>
[Attachment #4 (unknown)]
_______________________________________________
xorg@lists.x.org: X.Org support
Archives: http://lists.freedesktop.org/archives/xorg
Info: https://lists.x.org/mailman/listinfo/xorg
Your subscription address: %(user_address)s
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic