[prev in list] [next in list] [prev in thread] [next in thread]
List: freedesktop-xorg
Subject: Re: Strange problem that might be a hardware malfunction.
From: James Richard Tyrer <tyrerj () acm ! org>
Date: 2011-11-12 1:20:16
Message-ID: 4EBDC9D0.50708 () acm ! org
[Download RAW message or body]
On 11/11/2011 05:40 PM, James Richard Tyrer wrote:
> I will post new log files in a few minutes.
New log files are attached.
So far, things actually look worse. I also have an ATI X1650 card that
I will try later this evening.
--
James Tyrer
Linux (mostly) From Scratch
["dmesg" (text/plain)]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.4 (root@localhost) (gcc version 4.4.4 (GCC) ) #7 SMP \
Fri Nov 11 17:20:54 MST 2011 [ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE \
kernel! [ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: System manufacturer System Product Name/A8V, BIOS 0229 \
05/29/2007 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 \
(usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - \
0000000000100000 (usable) [ 0.000000] last_pfn = 0x3ffb0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 00D0000000 mask FFF0000000 write-combining
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 00eaa000 - 00f00000
[ 0.000000] ACPI: RSDP 000fa810 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 3ffb0000 00030 (v01 A M I OEMRSDT 05000729 MSFT 00000097)
[ 0.000000] ACPI: FACP 3ffb0200 00081 (v01 A M I OEMFACP 05000729 MSFT 00000097)
[ 0.000000] ACPI: DSDT 3ffb03f0 0391B (v01 A0277 A0277001 00000001 MSFT 0100000D)
[ 0.000000] ACPI: FACS 3ffc0000 00040
[ 0.000000] ACPI: APIC 3ffb0390 00052 (v01 A M I OEMAPIC 05000729 MSFT 00000097)
[ 0.000000] ACPI: OEMB 3ffc0040 0003F (v01 A M I OEMBIOS 05000729 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 135MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003ffb0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003ffb0
[ 0.000000] On node 0 totalpages: 261951
[ 0.000000] free_area_init_node: node 0, pgdat c16e2880, node_mem_map f6ffd200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 272 pages used for memmap
[ 0.000000] HighMem zone: 34466 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bf780000)
[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 11 pages/cpu @f6800000 s23872 r0 d21184 u2097152
[ 0.000000] pcpu-alloc: s23872 r0 d21184 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: \
259903 [ 0.000000] Kernel command line: auto BOOT_IMAGE=3.0.4 ro root=2209 irqpoll
[ 0.000000] Misrouted IRQ fixup and polling support enabled
[ 0.000000] This may significantly impact system performance
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003ffb0)
[ 0.000000] Memory: 1030344k/1048256k available (5241k kernel code, 17460k \
reserved, 1843k data, 404k init, 138952k highmem) [ 0.000000] virtual kernel \
memory layout: [ 0.000000] fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc16ec000 - 0xc1751000 ( 404 kB)
[ 0.000000] .data : 0xc151e577 - 0xc16eb500 (1843 kB)
[ 0.000000] .text : 0xc1000000 - 0xc151e577 (5241 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor \
mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, \
CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2202.367 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.001078] Calibrating delay loop (skipped), value calculated using timer \
frequency.. 4404.73 BogoMIPS (lpj=2202367) [ 0.001230] pid_max: default: 32768 \
minimum: 301 [ 0.001327] Security Framework initialized
[ 0.001421] Mount-cache hash table entries: 512
[ 0.001650] Initializing cgroup subsys cpuacct
[ 0.001729] Initializing cgroup subsys freezer
[ 0.001828] CPU: Physical Processor ID: 0
[ 0.002003] CPU: Processor Core ID: 0
[ 0.002077] mce: CPU supports 5 MCE banks
[ 0.002244] ACPI: Core revision 20110413
[ 0.004065] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.004956] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.015153] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02
[ 0.015998] Performance Events: AMD PMU driver.
[ 0.015998] ... version: 0
[ 0.015998] ... bit width: 48
[ 0.015998] ... generic registers: 4
[ 0.015998] ... value mask: 0000ffffffffffff
[ 0.015998] ... max period: 00007fffffffffff
[ 0.015998] ... fixed-purpose events: 0
[ 0.015998] ... event mask: 000000000000000f
[ 0.015998] MCE: In-kernel MCE decoding enabled.
[ 0.015998] CPU 1 irqstacks, hard=f6472000 soft=f6474000
[ 0.015998] Booting Node 0, Processors #1 Ok.
[ 0.016001] smpboot cpu 1: start_ip = 9a000
[ 0.001999] Initializing CPU#1
[ 0.087060] Brought up 2 CPUs
[ 0.087204] Total of 2 processors activated (8809.73 BogoMIPS).
[ 0.088092] PM: Registering ACPI NVS region at 3ffc0000 (196608 bytes)
[ 0.088163] Time: 1:07:45 Date: 11/12/11
[ 0.088272] NET: Registered protocol family 16
[ 0.089022] node 0 link 0: io port [1000, ffffff]
[ 0.089022] TOM: 0000000040000000 aka 1024M
[ 0.089080] node 0 link 0: mmio [a0000, bffff]
[ 0.089084] node 0 link 0: mmio [40000000, ffffffff]
[ 0.089087] bus: [00, ff] on node 0 link 0
[ 0.089090] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.089092] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.089095] bus: 00 index 2 [mem 0x40000000-0xffffffff]
[ 0.089100] ACPI: bus type pci registered
[ 0.090368] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[ 0.090445] PCI: Using configuration type 1 for base access
[ 0.097025] bio: create slab <bio-0> at 0
[ 0.097478] ACPI: EC: Look up EC in DSDT
[ 0.098508] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.100237] ACPI: Interpreter enabled
[ 0.100314] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.100606] ACPI: Using IOAPIC for interrupt routing
[ 0.106021] ACPI: No dock devices found.
[ 0.106097] PCI: Ignoring host bridge windows from ACPI; if necessary, use \
"pci=use_crs" and report a bug [ 0.106269] ACPI: PCI Root Bridge [PCI0] (domain \
0000 [bus 00-ff]) [ 0.106384] pci_root PNP0A03:00: host bridge window [io \
0x0000-0x0cf7] (ignored) [ 0.106384] pci_root PNP0A03:00: host bridge window [io \
0x0d00-0xffff] (ignored) [ 0.106384] pci_root PNP0A03:00: host bridge window [mem \
0x000a0000-0x000bffff] (ignored) [ 0.106384] pci_root PNP0A03:00: host bridge \
window [mem 0x40000000-0xffffffff] (ignored) [ 0.106384] pci 0000:00:00.0: \
[1106:0282] type 0 class 0x000600 [ 0.106384] pci 0000:00:00.0: reg 10: [mem \
0xd0000000-0xdfffffff pref] [ 0.106384] pci 0000:00:00.1: [1106:1282] type 0 class \
0x000600 [ 0.106384] pci 0000:00:00.2: [1106:2282] type 0 class 0x000600
[ 0.106384] pci 0000:00:00.3: [1106:3282] type 0 class 0x000600
[ 0.106384] pci 0000:00:00.4: [1106:4282] type 0 class 0x000600
[ 0.106384] pci 0000:00:00.7: [1106:7282] type 0 class 0x000600
[ 0.106384] pci 0000:00:01.0: [1106:b188] type 1 class 0x000604
[ 0.106384] pci 0000:00:01.0: supports D1
[ 0.106404] pci 0000:00:0a.0: [11ab:4320] type 0 class 0x000200
[ 0.106421] pci 0000:00:0a.0: reg 10: [mem 0xfb700000-0xfb703fff]
[ 0.106430] pci 0000:00:0a.0: reg 14: [io 0x9000-0x90ff]
[ 0.106462] pci 0000:00:0a.0: reg 30: [mem 0xfb600000-0xfb61ffff pref]
[ 0.106482] pci 0000:00:0a.0: supports D1 D2
[ 0.106484] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.106489] pci 0000:00:0a.0: PME# disabled
[ 0.106507] pci 0000:00:0b.0: [1002:4752] type 0 class 0x000300
[ 0.106523] pci 0000:00:0b.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.106533] pci 0000:00:0b.0: reg 14: [io 0x8000-0x80ff]
[ 0.106542] pci 0000:00:0b.0: reg 18: [mem 0xfb900000-0xfb900fff]
[ 0.106573] pci 0000:00:0b.0: reg 30: [mem 0xfb800000-0xfb81ffff pref]
[ 0.106997] pci 0000:00:0b.0: supports D1 D2
[ 0.107015] pci 0000:00:0e.0: [105a:4d68] type 0 class 0x000180
[ 0.107029] pci 0000:00:0e.0: reg 10: [io 0xa800-0xa807]
[ 0.107038] pci 0000:00:0e.0: reg 14: [io 0xa400-0xa403]
[ 0.107046] pci 0000:00:0e.0: reg 18: [io 0xa000-0xa007]
[ 0.107055] pci 0000:00:0e.0: reg 1c: [io 0x9800-0x9803]
[ 0.107063] pci 0000:00:0e.0: reg 20: [io 0x9400-0x940f]
[ 0.107072] pci 0000:00:0e.0: reg 24: [mem 0xfbb00000-0xfbb03fff]
[ 0.107080] pci 0000:00:0e.0: reg 30: [mem 0xfba00000-0xfba03fff pref]
[ 0.107097] pci 0000:00:0e.0: supports D1
[ 0.107112] pci 0000:00:0f.0: [1106:3149] type 0 class 0x000104
[ 0.107127] pci 0000:00:0f.0: reg 10: [io 0xc800-0xc807]
[ 0.107136] pci 0000:00:0f.0: reg 14: [io 0xc400-0xc403]
[ 0.107144] pci 0000:00:0f.0: reg 18: [io 0xc000-0xc007]
[ 0.107153] pci 0000:00:0f.0: reg 1c: [io 0xb800-0xb803]
[ 0.107162] pci 0000:00:0f.0: reg 20: [io 0xb400-0xb40f]
[ 0.107171] pci 0000:00:0f.0: reg 24: [io 0xb000-0xb0ff]
[ 0.107208] pci 0000:00:0f.1: [1106:0571] type 0 class 0x000101
[ 0.107248] pci 0000:00:0f.1: reg 20: [io 0xfc00-0xfc0f]
[ 0.107296] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
[ 0.107331] pci 0000:00:10.0: reg 20: [io 0xd000-0xd01f]
[ 0.107356] pci 0000:00:10.0: supports D1 D2
[ 0.107358] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.107363] pci 0000:00:10.0: PME# disabled
[ 0.107377] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
[ 0.107412] pci 0000:00:10.1: reg 20: [io 0xd400-0xd41f]
[ 0.107437] pci 0000:00:10.1: supports D1 D2
[ 0.107439] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.107443] pci 0000:00:10.1: PME# disabled
[ 0.107459] pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03
[ 0.107472] pci 0000:00:10.4: reg 10: [mem 0xfbd00000-0xfbd000ff]
[ 0.107519] pci 0000:00:10.4: supports D1 D2
[ 0.107521] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.107525] pci 0000:00:10.4: PME# disabled
[ 0.107543] pci 0000:00:11.0: [1106:3227] type 0 class 0x000601
[ 0.107595] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.107676] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
[ 0.107783] pci 0000:00:11.5: [1106:3059] type 0 class 0x000401
[ 0.107798] pci 0000:00:11.5: reg 10: [io 0xd800-0xd8ff]
[ 0.107851] pci 0000:00:11.5: supports D1 D2
[ 0.107867] pci 0000:00:11.6: [1106:3068] type 0 class 0x000780
[ 0.107882] pci 0000:00:11.6: reg 10: [io 0x0000-0x00ff]
[ 0.107951] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.107967] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.107980] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.107998] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.108017] PCI: peer root bus 00 res updated from pci conf
[ 0.108045] pci 0000:01:00.0: [1002:5961] type 0 class 0x000300
[ 0.108056] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff pref]
[ 0.108062] pci 0000:01:00.0: reg 14: [io 0xe000-0xe0ff]
[ 0.108069] pci 0000:01:00.0: reg 18: [mem 0xfbf00000-0xfbf0ffff]
[ 0.108086] pci 0000:01:00.0: reg 30: [mem 0xfbe00000-0xfbe1ffff pref]
[ 0.108099] pci 0000:01:00.0: supports D1 D2
[ 0.108123] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.108199] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.108204] pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbffffff]
[ 0.108208] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf9ffffff pref]
[ 0.108215] pci_bus 0000:00: on NUMA node 0
[ 0.108219] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.108379] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x18)
[ 0.113200] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[ 0.113541] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
[ 0.114453] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[ 0.114961] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 11 14 15)
[ 0.115454] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, \
disabled. [ 0.116090] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) \
*0, disabled. [ 0.116708] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 \
15) *0, disabled. [ 0.117320] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 \
14 15) *0, disabled. [ 0.118023] vgaarb: device added: \
PCI:0000:00:0b.0,decodes=io+mem,owns=none,locks=none [ 0.118114] vgaarb: device \
added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.118220] vgaarb: \
loaded [ 0.118292] vgaarb: bridge control possible 0000:01:00.0
[ 0.118368] vgaarb: bridge control possible 0000:00:0b.0
[ 0.118530] SCSI subsystem initialized
[ 0.118530] libata version 3.00 loaded.
[ 0.118530] usbcore: registered new interface driver usbfs
[ 0.119012] usbcore: registered new interface driver hub
[ 0.119079] usbcore: registered new device driver usb
[ 0.119085] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.119097] PCI: Using ACPI for IRQ routing
[ 0.119097] PCI: pci_cache_line_size set to 64 bytes
[ 0.119130] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.119133] reserve RAM buffer: 000000003ffb0000 - 000000003fffffff
[ 0.119159] NetLabel: Initializing
[ 0.119991] NetLabel: domain hash size = 128
[ 0.120065] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.120151] NetLabel: unlabeled traffic allowed by default
[ 0.120301] pnp: PnP ACPI init
[ 0.120301] ACPI: bus type pnp registered
[ 0.120301] pnp 00:00: [bus 00-ff]
[ 0.120301] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.120301] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.120301] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.120301] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.120301] pnp 00:00: [mem 0x00000000 window]
[ 0.120301] pnp 00:00: [mem 0x40000000-0xffffffff window]
[ 0.120301] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.120301] pnp 00:01: [dma 4]
[ 0.120301] pnp 00:01: [io 0x0000-0x000f]
[ 0.120301] pnp 00:01: [io 0x0081-0x0083]
[ 0.120301] pnp 00:01: [io 0x0087]
[ 0.120301] pnp 00:01: [io 0x0089-0x008b]
[ 0.120301] pnp 00:01: [io 0x008f]
[ 0.120301] pnp 00:01: [io 0x00c0-0x00df]
[ 0.120301] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.120301] pnp 00:02: [io 0x0070-0x0071]
[ 0.120301] pnp 00:02: [irq 8]
[ 0.120301] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.120301] pnp 00:03: [io 0x0060]
[ 0.120301] pnp 00:03: [io 0x0064]
[ 0.120301] pnp 00:03: [irq 1]
[ 0.120301] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.120301] pnp 00:04: [irq 12]
[ 0.120301] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.120301] pnp 00:05: [io 0x0061]
[ 0.120301] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.120998] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.121004] pnp 00:06: [irq 13]
[ 0.121035] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.121236] pnp 00:07: [irq 6]
[ 0.121238] pnp 00:07: [dma 2]
[ 0.121240] pnp 00:07: [io 0x03f0-0x03f5]
[ 0.121243] pnp 00:07: [io 0x03f7]
[ 0.121305] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.121305] pnp 00:08: [io 0x03bc-0x03bf]
[ 0.121305] pnp 00:08: [io 0x07bc-0x07bf]
[ 0.121305] pnp 00:08: [irq 7]
[ 0.121305] pnp 00:08: [dma 3]
[ 0.121373] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.121373] pnp 00:09: [io 0x0000-0xffffffff disabled]
[ 0.121373] pnp 00:09: [io 0x0680-0x06ff]
[ 0.121373] pnp 00:09: [io 0x0290-0x0297]
[ 0.121373] system 00:09: [io 0x0680-0x06ff] has been reserved
[ 0.121373] system 00:09: [io 0x0290-0x0297] has been reserved
[ 0.121991] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.122063] pnp 00:0a: [io 0x0010-0x001f]
[ 0.122066] pnp 00:0a: [io 0x0022-0x003f]
[ 0.122069] pnp 00:0a: [io 0x0044-0x005f]
[ 0.122071] pnp 00:0a: [io 0x0062-0x0063]
[ 0.122073] pnp 00:0a: [io 0x0065-0x006f]
[ 0.122075] pnp 00:0a: [io 0x0072-0x007f]
[ 0.122078] pnp 00:0a: [io 0x0080]
[ 0.122080] pnp 00:0a: [io 0x0084-0x0086]
[ 0.122082] pnp 00:0a: [io 0x0088]
[ 0.122084] pnp 00:0a: [io 0x008c-0x008e]
[ 0.122086] pnp 00:0a: [io 0x0090-0x009f]
[ 0.122091] pnp 00:0a: [io 0x00a2-0x00bf]
[ 0.122093] pnp 00:0a: [io 0x00e0-0x00ef]
[ 0.122095] pnp 00:0a: [io 0x03e1-0x03e7]
[ 0.122097] pnp 00:0a: [io 0x04d0-0x04d1]
[ 0.122099] pnp 00:0a: [io 0x0800-0x087f]
[ 0.122102] pnp 00:0a: [io 0x0400-0x041f]
[ 0.122104] pnp 00:0a: [io 0x0000-0xffffffff disabled]
[ 0.122136] pnp 00:0a: disabling [io 0x0010-0x001f] because it overlaps \
0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.122245] pnp 00:0a: disabling [io \
0x0022-0x003f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ \
0.122355] pnp 00:0a: disabling [io 0x0044-0x005f] because it overlaps 0000:00:11.6 \
BAR 0 [io 0x0000-0x00ff] [ 0.122465] pnp 00:0a: disabling [io 0x0062-0x0063] \
because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.122574] pnp 00:0a: \
disabling [io 0x0065-0x006f] because it overlaps 0000:00:11.6 BAR 0 [io \
0x0000-0x00ff] [ 0.122683] pnp 00:0a: disabling [io 0x0072-0x007f] because it \
overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.122793] pnp 00:0a: disabling \
[io 0x0080] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ \
0.122902] pnp 00:0a: disabling [io 0x0084-0x0086] because it overlaps 0000:00:11.6 \
BAR 0 [io 0x0000-0x00ff] [ 0.122991] pnp 00:0a: disabling [io 0x0088] because it \
overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.123099] pnp 00:0a: disabling \
[io 0x008c-0x008e] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ \
0.123209] pnp 00:0a: disabling [io 0x0090-0x009f] because it overlaps 0000:00:11.6 \
BAR 0 [io 0x0000-0x00ff] [ 0.123319] pnp 00:0a: disabling [io 0x00a2-0x00bf] \
because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.123991] pnp 00:0a: \
disabling [io 0x00e0-0x00ef] because it overlaps 0000:00:11.6 BAR 0 [io \
0x0000-0x00ff] [ 0.124133] system 00:0a: [io 0x03e1-0x03e7] has been reserved
[ 0.124133] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.124150] system 00:0a: [io 0x0800-0x087f] has been reserved
[ 0.124227] system 00:0a: [io 0x0400-0x041f] has been reserved
[ 0.124304] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.124361] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.124364] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.124366] pnp 00:0b: [mem 0xfff80000-0xffffffff]
[ 0.124416] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.124416] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.124416] system 00:0b: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.124416] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.125316] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.125319] pnp 00:0c: [mem 0x000c0000-0x000dffff]
[ 0.125322] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.125324] pnp 00:0c: [mem 0x00100000-0x3ffeffff]
[ 0.125327] pnp 00:0c: [mem 0x00000000-0xffffffff disabled]
[ 0.125377] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.125377] system 00:0c: [mem 0x000c0000-0x000dffff] could not be reserved
[ 0.125377] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.125377] system 00:0c: [mem 0x00100000-0x3ffeffff] could not be reserved
[ 0.125377] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.125422] pnp: PnP ACPI: found 13 devices
[ 0.125495] ACPI: ACPI bus type pnp unregistered
[ 0.163515] Switching to clocksource acpi_pm
[ 0.163612] PCI: max bus depth: 1 pci_try_num: 2
[ 0.163623] pci 0000:00:11.6: BAR 0: assigned [io 0x1000-0x10ff]
[ 0.163703] pci 0000:00:11.6: BAR 0: set to [io 0x1000-0x10ff] (PCI address \
[0x1000-0x10ff]) [ 0.163812] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.163889] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.163968] pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbffffff]
[ 0.163968] Switched to NOHz mode on CPU #0
[ 0.163592] Switched to NOHz mode on CPU #1
[ 0.163968] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf9ffffff pref]
[ 0.163968] pci 0000:00:01.0: setting latency timer to 64
[ 0.163968] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.163968] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.163968] pci_bus 0000:00: resource 6 [mem 0x40000000-0xffffffff]
[ 0.163968] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.163968] pci_bus 0000:01: resource 1 [mem 0xfbe00000-0xfbffffff]
[ 0.163968] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf9ffffff pref]
[ 0.163968] NET: Registered protocol family 2
[ 0.163968] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.164140] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.165314] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.165982] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.166071] TCP reno registered
[ 0.166145] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.166241] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.166439] NET: Registered protocol family 1
[ 0.166540] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.166634] pci 0000:00:10.0: uhci_check_and_reset_hc: legsup = 0x8030
[ 0.166636] pci 0000:00:10.0: Performing full reset
[ 0.166651] pci 0000:00:10.1: uhci_check_and_reset_hc: legsup = 0x8030
[ 0.166653] pci 0000:00:10.1: Performing full reset
[ 0.166704] pci 0000:01:00.0: Boot video device
[ 0.166708] PCI: CLS 64 bytes, default 64
[ 0.166764] Trying to unpack rootfs image as initramfs...
[ 0.167069] rootfs image is not initramfs (no cpio magic); looks like an initrd
[ 0.167979] Freeing initrd memory: 344k freed
[ 0.169378] audit: initializing netlink socket (disabled)
[ 0.169466] type=2000 audit(1321060065.168:1): initialized
[ 0.186935] highmem bounce pool size: 64 pages
[ 0.187029] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.191948] msgmni has been set to 1741
[ 0.192447] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.192553] io scheduler noop registered
[ 0.192626] io scheduler deadline registered
[ 0.192711] io scheduler cfq registered (default)
[ 0.193200] input: Power Button as \
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.193311] ACPI: Power \
Button [PWRB] [ 0.193455] input: Sleep Button as \
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.193562] ACPI: Sleep \
Button [SLPB] [ 0.193697] input: Power Button as \
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.193803] ACPI: Power Button \
[PWRF] [ 0.193958] ACPI: acpi_idle registered with cpuidle
[ 0.195996] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
[ 0.201405] lp: driver loaded but no devices found
[ 0.201624] Non-volatile memory driver v1.3
[ 0.201710] Linux agpgart interface v0.103
[ 0.201796] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0282]
[ 0.213567] agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.213819] ipmi message handler version 39.2
[ 0.213951] [drm] Initialized drm 1.1.0 20060810
[ 0.214150] [drm] radeon defaulting to userspace modesetting.
[ 0.214407] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.214602] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.214679] [drm] No driver support for vblank timestamp query.
[ 0.214757] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0
[ 0.215512] parport_pc 00:08: reported by Plug and Play ACPI
[ 0.215634] parport0: PC-style at 0x3bc (0x7bc), irq 7 [PCSPP,TRISTATE]
[ 0.298064] lp0: using parport0 (interrupt-driven).
[ 0.298675] Floppy drive(s): fd0 is 1.44M
[ 0.313230] FDC 0 is a post-1991 82077
[ 0.316982] brd: module loaded
[ 0.317973] loop: module loaded
[ 0.318054] Uniform Multi-Platform E-IDE driver
[ 0.318223] pdc202xx_new 0000:00:0e.0: IDE controller (0x105a:0x4d68 rev 0x01)
[ 0.318337] pci 0000:00:0e.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.328458] pdc202xx_new 0000:00:0e.0: PLL input clock is 16662 kHz
[ 0.358535] pdc202xx_new 0000:00:0e.0: 100% native mode on irq 19
[ 0.358615] ide2: BM-DMA at 0x9400-0x9407
[ 0.358695] ide3: BM-DMA at 0x9408-0x940f
[ 0.358774] Probing IDE interface ide2...
[ 0.622332] hde: IBM-DPTA-372050, ATA DISK drive
[ 0.928011] hdf: IBM-DTLA-305020, ATA DISK drive
[ 0.928143] hde: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 0.928393] hde: UDMA/66 mode selected
[ 0.928734] hdf: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 0.928893] hdf: UDMA/100 mode selected
[ 0.929128] Probing IDE interface ide3...
[ 1.193330] hdg: IC35L120AVV207-0, ATA DISK drive
[ 1.805063] hdg: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 1.805232] hdg: UDMA/100 mode selected
[ 1.805511] ide2 at 0xa800-0xa807,0xa402 on irq 19
[ 1.805659] ide3 at 0xa000-0xa007,0x9802 on irq 19
[ 1.805952] via82cxxx 0000:00:0f.1: VIA vt8237 (rev 00) IDE UDMA133
[ 1.806036] via82cxxx 0000:00:0f.1: IDE controller (0x1106:0x0571 rev 0x06)
[ 1.806125] pci 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.806224] via82cxxx 0000:00:0f.1: not 100% native mode: will probe irqs later
[ 1.806331] ide0: BM-DMA at 0xfc00-0xfc07
[ 1.806411] ide1: BM-DMA at 0xfc08-0xfc0f
[ 1.806487] Probing IDE interface ide0...
[ 2.478105] hda: HITACHI DVD-ROM GD-8000, ATAPI CD/DVD-ROM drive
[ 3.243011] hdb: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive
[ 3.243232] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 3.244367] hda: host side 80-wire cable detection failed, limiting max speed to \
UDMA33 [ 3.244472] hda: UDMA/33 mode selected
[ 3.245439] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO3
[ 3.245714] hdb: MWDMA0 mode selected
[ 3.246090] hdb: set_drive_speed_status: status=0x51 { DriveReady SeekComplete \
Error } [ 3.246358] hdb: set_drive_speed_status: error=0x04 { AbortedCommand }
[ 3.246556] hdb: possibly failed opcode: 0x00
[ 3.246630] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO3
[ 3.246919] Probing IDE interface ide1...
[ 3.765090] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.765254] ide1 at 0x170-0x177,0x376 on irq 15
[ 3.765614] ide_generic: please use "probe_mask=0x3f" module parameter for probing \
all legacy ISA IDE ports [ 3.765762] ide-gd driver 1.18
[ 3.765851] hde: max request size: 128KiB
[ 3.779824] hde: 40088160 sectors (20525 MB) w/1961KiB Cache, CHS=39770/16/63
[ 3.779984] hde: cache flushes not supported
[ 3.885035] hde: hde1 < hde5 hde6 hde7 hde8 hde9 hde10 hde11 hde12 hde13 hde14 >
[ 3.885764] hdf: max request size: 128KiB
[ 3.919977] hdf: 40188960 sectors (20576 MB) w/380KiB Cache, CHS=39870/16/63
[ 3.920141] hdf: cache flushes not supported
[ 3.962425] hdf: hdf1 hdf2 hdf3 hdf4
[ 3.962773] hdg: max request size: 512KiB
[ 3.978170] hdg: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=16383/255/63
[ 3.978536] hdg: cache flushes supported
[ 4.112787] hdg: hdg1 hdg2 hdg3 hdg4 < hdg5 hdg6 hdg7 hdg8 hdg9 hdg10 hdg11 hdg12 \
hdg13 hdg14 hdg15 hdg16 > [ 4.114792] ide-gd: hdb: No disk in drive
[ 4.116243] ide-gd: hdb: 244736kB, 239/64/32 CHS, 4096 kBps, 512 sector size, 2941 \
rpm [ 4.116510] ide-cd driver 5.00
[ 4.119200] ide-cd: hda: ATAPI 48X DVD-ROM drive, 512kB Cache
[ 4.119438] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.137539] sata_via 0000:00:0f.0: version 2.6
[ 4.137547] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 4.137663] sata_via 0000:00:0f.0: routed to hard irq line 10
[ 4.138119] scsi0 : sata_via
[ 4.138317] scsi1 : sata_via
[ 4.138480] ata1: SATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb400 irq 20
[ 4.138558] ata2: SATA max UDMA/133 cmd 0xc000 ctl 0xb800 bmdma 0xb408 irq 20
[ 4.138955] skge 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.139050] skge 0000:00:0a.0: PCI: Disallowing DAC for device
[ 4.139153] skge: 1.13 addr 0xfb700000 irq 17 chip Yukon-Lite rev 9
[ 4.139502] skge 0000:00:0a.0: eth0: addr 00:17:31:17:5f:de
[ 4.139698] PPP generic driver version 2.4.2
[ 4.139867] PPP Deflate Compression module registered
[ 4.139986] console [netcon0] enabled
[ 4.140090] netconsole: network logging started
[ 4.140165] usbmon: debugfs is not available
[ 4.140240] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.140317] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
[ 4.140350] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 4.140450] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 4.140530] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 4.140642] ehci_hcd 0000:00:10.4: reset hcs_params 0x2204 dbg=0 cc=2 pcc=2 \
ordered !ppc ports=4 [ 4.140646] ehci_hcd 0000:00:10.4: reset hcc_params 6872 \
thresh 7 uframes 256/512/1024 [ 4.140670] ehci_hcd 0000:00:10.4: reset command \
0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 4.140677] ehci_hcd \
0000:00:10.4: MWI active [ 4.140680] ehci_hcd 0000:00:10.4: supports USB remote \
wakeup [ 4.140710] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfbd00000
[ 4.140787] ehci_hcd 0000:00:10.4: reset command 0080002 (park)=0 ithresh=8 \
period=1024 Reset HALT [ 4.140793] ehci_hcd 0000:00:10.4: init command 0010005 \
(park)=0 ithresh=1 period=512 RUN [ 4.146013] ehci_hcd 0000:00:10.4: USB 2.0 \
started, EHCI 1.00 [ 4.146104] usb usb1: default language 0x0409
[ 4.146111] usb usb1: udev 1, busnum 1, minor = 0
[ 4.146113] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.146191] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.146297] usb usb1: Product: EHCI Host Controller
[ 4.146372] usb usb1: Manufacturer: Linux 3.0.4 ehci_hcd
[ 4.146448] usb usb1: SerialNumber: 0000:00:10.4
[ 4.146604] usb usb1: usb_probe_device
[ 4.146607] usb usb1: configuration #1 chosen from 1 choice
[ 4.146616] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 4.146667] hub 1-0:1.0: usb_probe_interface
[ 4.146670] hub 1-0:1.0: usb_probe_interface - got id
[ 4.146672] hub 1-0:1.0: USB hub found
[ 4.146749] hub 1-0:1.0: 4 ports detected
[ 4.146823] hub 1-0:1.0: standalone hub
[ 4.146825] hub 1-0:1.0: no power switching (usb 1.0)
[ 4.146827] hub 1-0:1.0: individual port over-current protection
[ 4.146830] hub 1-0:1.0: power on to power good time: 20ms
[ 4.146834] hub 1-0:1.0: local power source is good
[ 4.146837] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 4.146924] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.147009] ohci_hcd: block sizes: ed 64 td 64
[ 4.147052] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.147173] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 4.147256] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 4.147335] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 4.147444] uhci_hcd 0000:00:10.0: detected 2 ports
[ 4.147522] uhci_hcd 0000:00:10.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 4.147524] uhci_hcd 0000:00:10.0: Performing full reset
[ 4.147535] uhci_hcd 0000:00:10.0: supports USB remote wakeup
[ 4.147540] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d000
[ 4.147643] usb usb2: default language 0x0409
[ 4.147648] usb usb2: udev 1, busnum 2, minor = 128
[ 4.147651] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.148321] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.148427] usb usb2: Product: UHCI Host Controller
[ 4.148502] usb usb2: Manufacturer: Linux 3.0.4 uhci_hcd
[ 4.148578] usb usb2: SerialNumber: 0000:00:10.0
[ 4.148721] usb usb2: usb_probe_device
[ 4.148724] usb usb2: configuration #1 chosen from 1 choice
[ 4.148730] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 4.148779] hub 2-0:1.0: usb_probe_interface
[ 4.148781] hub 2-0:1.0: usb_probe_interface - got id
[ 4.148784] hub 2-0:1.0: USB hub found
[ 4.148859] hub 2-0:1.0: 2 ports detected
[ 4.148932] hub 2-0:1.0: standalone hub
[ 4.148934] hub 2-0:1.0: no power switching (usb 1.0)
[ 4.148936] hub 2-0:1.0: individual port over-current protection
[ 4.148939] hub 2-0:1.0: power on to power good time: 2ms
[ 4.148942] hub 2-0:1.0: local power source is good
[ 4.148945] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 4.148982] ehci_hcd 0000:00:10.4: HS companion for 0000:00:10.0
[ 4.148996] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 4.149086] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 4.149163] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 4.149271] uhci_hcd 0000:00:10.1: detected 2 ports
[ 4.149348] uhci_hcd 0000:00:10.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 4.149350] uhci_hcd 0000:00:10.1: Performing full reset
[ 4.149361] uhci_hcd 0000:00:10.1: supports USB remote wakeup
[ 4.149366] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d400
[ 4.149467] usb usb3: default language 0x0409
[ 4.149472] usb usb3: udev 1, busnum 3, minor = 256
[ 4.149475] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.149552] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.149657] usb usb3: Product: UHCI Host Controller
[ 4.149732] usb usb3: Manufacturer: Linux 3.0.4 uhci_hcd
[ 4.149807] usb usb3: SerialNumber: 0000:00:10.1
[ 4.149949] usb usb3: usb_probe_device
[ 4.149952] usb usb3: configuration #1 chosen from 1 choice
[ 4.149958] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 4.150011] hub 3-0:1.0: usb_probe_interface
[ 4.150014] hub 3-0:1.0: usb_probe_interface - got id
[ 4.150016] hub 3-0:1.0: USB hub found
[ 4.150091] hub 3-0:1.0: 2 ports detected
[ 4.150164] hub 3-0:1.0: standalone hub
[ 4.150166] hub 3-0:1.0: no power switching (usb 1.0)
[ 4.150168] hub 3-0:1.0: individual port over-current protection
[ 4.150170] hub 3-0:1.0: power on to power good time: 2ms
[ 4.150174] hub 3-0:1.0: local power source is good
[ 4.150177] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 4.150209] ehci_hcd 0000:00:10.4: HS companion for 0000:00:10.1
[ 4.150309] usbcore: registered new interface driver libusual
[ 4.150494] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 \
irq 1,12 [ 4.151111] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.151191] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.151480] mousedev: PS/2 mouse device common for all mice
[ 4.151860] rtc_cmos 00:02: RTC can wake from S4
[ 4.152125] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 4.152256] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 4.152714] cpuidle: using governor ladder
[ 4.152788] cpuidle: using governor menu
[ 4.152862] EFI Variables Facility v0.08 2004-May-17
[ 4.153810] usbcore: registered new interface driver usbhid
[ 4.153885] usbhid: USB HID core driver
[ 4.154301] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ \
22 [ 4.154766] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 4.168444] input: AT Translated Set 2 keyboard as \
/devices/platform/i8042/serio0/input/input3 [ 4.246032] hub 1-0:1.0: state 7 ports \
4 chg 0000 evt 0000 [ 4.248016] uhci_hcd 0000:00:10.0: port 1 portsc 018a,00
[ 4.248025] uhci_hcd 0000:00:10.0: port 2 portsc 018a,00
[ 4.250012] uhci_hcd 0000:00:10.1: port 1 portsc 018a,00
[ 4.250020] uhci_hcd 0000:00:10.1: port 2 portsc 018a,00
[ 4.335436] logips2pp: Detected unknown logitech mouse model 105
[ 4.339015] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 4.349777] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 4.350020] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 4.550017] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 4.668324] ALSA device list:
[ 4.668397] #0: VIA 8237 with ALC850 at 0xd800, irq 22
[ 4.668520] Netfilter messages via NETLINK v0.30.
[ 4.668622] nf_conntrack version 0.5.0 (16104 buckets, 64416 max)
[ 4.668902] ctnetlink v0.93: registering with nfnetlink.
[ 4.669130] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.669246] TCP cubic registered
[ 4.669318] Initializing XFRM netlink socket
[ 4.669757] NET: Registered protocol family 10
[ 4.670056] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 4.670164] IPv6 over IPv4 tunneling driver
[ 4.670472] NET: Registered protocol family 17
[ 4.670554] Using IPI No-Shortcut mode
[ 4.670806] PM: Hibernation image not present or could not be loaded.
[ 4.670815] registered taskstats version 1
[ 4.671177] Magic number: 3:100:104
[ 4.820271] input: ImExPS/2 Logitech Explorer Mouse as \
/devices/platform/i8042/serio1/input/input4 [ 4.823248] RAMDISK: gzip image found \
at block 0 [ 4.878083] VFS: Mounted root (ext2 filesystem) on device 1:0.
[ 4.888865] EXT3-fs: barriers not enabled
[ 4.897932] kjournald starting. Commit interval 5 seconds
[ 4.898031] EXT3-fs (hdg9): mounted filesystem with writeback data mode
[ 4.910608] Freeing unused kernel memory: 404k freed
[ 5.454033] usb usb2: suspend_rh (auto-stop)
[ 5.454056] usb usb3: suspend_rh (auto-stop)
[ 8.636059] EXT3-fs (hdg9): using internal journal
[ 8.862008] EXT3-fs: barriers not enabled
[ 8.867098] kjournald starting. Commit interval 5 seconds
[ 8.867262] EXT3-fs (hdg11): using internal journal
[ 8.867266] EXT3-fs (hdg11): mounted filesystem with writeback data mode
[ 8.880396] EXT2-fs (hdg12): warning: mounting ext3 filesystem as ext2
[ 8.935602] EXT2-fs (hdg6): warning: mounting ext3 filesystem as ext2
[ 8.958480] EXT3-fs: barriers not enabled
[ 8.965695] kjournald starting. Commit interval 5 seconds
[ 8.965856] EXT3-fs (hdg13): using internal journal
[ 8.965858] EXT3-fs (hdg13): mounted filesystem with writeback data mode
[ 9.005556] EXT3-fs: barriers not enabled
[ 9.007775] kjournald starting. Commit interval 5 seconds
[ 9.007938] EXT3-fs (hdg16): using internal journal
[ 9.007941] EXT3-fs (hdg16): mounted filesystem with writeback data mode
[ 9.062606] EXT3-fs: barriers not enabled
[ 9.067036] kjournald starting. Commit interval 5 seconds
[ 9.067197] EXT3-fs (hdg10): using internal journal
[ 9.067199] EXT3-fs (hdg10): mounted filesystem with writeback data mode
[ 9.127867] EXT3-fs: barriers not enabled
[ 9.129179] kjournald starting. Commit interval 5 seconds
[ 9.129338] EXT3-fs (hdg14): using internal journal
[ 9.129341] EXT3-fs (hdg14): mounted filesystem with writeback data mode
[ 9.186274] EXT3-fs: barriers not enabled
[ 9.190301] kjournald starting. Commit interval 5 seconds
[ 9.190464] EXT3-fs (hdg15): using internal journal
[ 9.190466] EXT3-fs (hdg15): mounted filesystem with writeback data mode
[ 9.215174] EXT3-fs: barriers not enabled
[ 9.229106] kjournald starting. Commit interval 5 seconds
[ 9.234654] EXT3-fs (hde13): using internal journal
[ 9.234657] EXT3-fs (hde13): mounted filesystem with writeback data mode
[ 9.263930] EXT3-fs: barriers not enabled
[ 9.272239] kjournald starting. Commit interval 5 seconds
[ 9.274500] EXT3-fs (hde14): using internal journal
[ 9.274502] EXT3-fs (hde14): mounted filesystem with writeback data mode
[ 9.301527] EXT3-fs: barriers not enabled
[ 9.313902] kjournald starting. Commit interval 5 seconds
[ 9.314066] EXT3-fs (hdf3): using internal journal
[ 9.314069] EXT3-fs (hdf3): mounted filesystem with writeback data mode
[ 9.363910] EXT3-fs: barriers not enabled
[ 9.377729] kjournald starting. Commit interval 5 seconds
[ 9.377891] EXT3-fs (hdf4): using internal journal
[ 9.377894] EXT3-fs (hdf4): mounted filesystem with writeback data mode
[ 10.161336] Adding 538172k swap on /dev/hdg2. Priority:32 extents:1 \
across:538172k [ 10.175205] Adding 538172k swap on /dev/hdg3. Priority:33 \
extents:1 across:538172k [ 10.199122] Adding 500404k swap on /dev/hde5. \
Priority:128 extents:1 across:500404k [ 10.213534] Adding 500436k swap on \
/dev/hde6. Priority:129 extents:1 across:500436k [ 10.227354] Adding 500436k swap \
on /dev/hde7. Priority:130 extents:1 across:500436k [ 10.242217] Adding 500436k \
swap on /dev/hde8. Priority:131 extents:1 across:500436k [ 10.265704] Adding \
500436k swap on /dev/hde9. Priority:132 extents:1 across:500436k [ 10.281849] \
Adding 500436k swap on /dev/hde10. Priority:133 extents:1 across:500436k [ \
10.297226] Adding 500436k swap on /dev/hde11. Priority:134 extents:1 across:500436k \
[ 10.312635] Adding 500436k swap on /dev/hde12. Priority:135 extents:1 \
across:500436k
["Xorg.0.log" (text/plain)]
X.Org X Server 1.7.1
Release Date: 2009-10-23
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30.2n i686
Current Operating System: Linux localhost 3.0.4 #7 SMP Fri Nov 11 17:20:54 MST 2011 \
i686 Kernel command line: auto BOOT_IMAGE=3.0.4 ro root=2209 irqpoll
Build Date: 14 April 2010 02:55:51AM
Current version of pixman: 0.19.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 11 18:08:28 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "NEC MultiSync 3V"
(**) | |-->Device "RADEON 9250"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AIGLX" "true"
(**) Option "AllowEmptyInput" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/ttf-bitstream-vera".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/ttf-bitstream-vera").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/ttf-dejavu".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/ttf-dejavu").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/ttf-dejavu-lgc".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/ttf-dejavu-lgc").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/URW/TT".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/URW/TT").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/freefont".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/freefont").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/wine".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/wine").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/texcm-ttf".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/texcm-ttf").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/URW/Type1".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/URW/Type1").
(WW) The directory "/usr/X11R7/lib/X11/fonts/misc/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R7/lib/X11/fonts/TTF/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R7/lib/X11/fonts/OTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R7/lib/X11/fonts/Type1/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R7/lib/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R7/lib/X11/fonts/75dpi/" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/X11R7/share/fonts/X11/misc:unscaled,
/usr/share/fonts/msttfonts,
/usr/X11R7/share/fonts/X11/TTF,
/usr/share/fonts/TT,
/usr/share/fonts/WP4WIN,
/usr/share/fonts/STIX,
/usr/share/fonts/DroidFonts,
/usr/X11R7/share/fonts/X11/Type1,
/usr/share/fonts/Type1,
/usr/X11R7/share/fonts/X11/OTF,
/usr/X11R7/share/fonts/X11/cyrillic,
/usr/X11R7/share/fonts/X11/100dpi,
/usr/X11R7/share/fonts/X11/75dpi
(**) ModulePath set to "/usr/X11R7/lib/xorg/modules"
(**) Extension "RENDER" is enabled
(**) Extension "DAMAGE" is enabled
(**) Extension "Composite" is enabled
(II) Loader magic: 0x81e16a0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI: (0:0:11:0) 1002:4752:1002:8008 rev 39, Mem @ 0xfa000000/16777216, \
0xfb900000/4096, I/O @ 0x00008000/256, BIOS @ 0x????????/131072 (--) PCI:*(0:1:0:0) \
1002:5961:18bc:0054 rev 1, Mem @ 0xe0000000/268435456, 0xfbf00000/65536, I/O @ \
0x0000e000/256, BIOS @ 0x????????/131072 (WW) Open ACPI failed \
(/var/run/acpid.socket) (No such file or directory) (II) "extmod" will be loaded. \
This was enabled by default and also specified in the config file. (II) "dbe" will be \
loaded. This was enabled by default and also specified in the config file. (II) "glx" \
will be loaded. This was enabled by default and also specified in the config file. \
(II) "dri" will be loaded. This was enabled by default and also specified in the \
config file. (II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/X11R7/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R7/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/X11R7/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R7/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "dri2"
(II) Loading /usr/X11R7/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeon"
(II) Loading /usr/X11R7/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 6.14.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "mouse"
(II) Loading /usr/X11R7/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.5.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) LoadModule: "kbd"
(II) Loading /usr/X11R7/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200, ATI Radeon 4100,
ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, AMD Radeon HD 6900 Series,
AMD Radeon HD 6900 Series, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS
(II) Primary Device is: PCI 01@00:00:0
(II) [KMS] drm report modesetting isn't supported.
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(II) RADEON(0): TOTO SAYS 00000000fbf00000
(II) RADEON(0): MMIO registers at 0x00000000fbf00000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "BusType" "AGP"
(**) RADEON(0): Option "GARTSize" "64"
(**) RADEON(0): Option "EnablePageFlip" "on"
(**) RADEON(0): Option "AccelDFS" "1"
(**) RADEON(0): Option "DisplayPriority" "HIGH"
(**) RADEON(0): Option "ColorTiling" "1"
(**) RADEON(0): Option "AccelMethod" "EXA"
(**) RADEON(0): Option "DRI" "on"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R7/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon 9200 5961 (AGP)" (ChipID = 0x5961)
(--) RADEON(0): Linear framebuffer at 0x00000000e0000000
(II) RADEON(0): AGP card detected
(**) RADEON(0): Forced into AGP mode
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R7/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version \
1.33.0 (**) RADEON(0): Page Flipping enabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=262144K, accessible=262144K (PCI \
BAR=262144K) (--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 40000, min_in_pll: \
40, max_in_pll: 3000, xclk: 14200, sclk: 202.500000, mclk: 142.000000 (II) RADEON(0): \
PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=14200 (II) RADEON(0): DFP \
table revision: 3 (II) RADEON(0): Output VGA-0 using monitor section NEC MultiSync 3V
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC PAL PAL-M NTSC-J
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
(II) RADEON(0): Port1:
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_DAC2
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
(II) RADEON(0): Port2:
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Found color CRT connected to primary DAC
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
finished output detect: 1
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
finished output detect: 2
finished all detect
(II) RADEON(0): Found color CRT connected to primary DAC
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): Adding Screen mode: 1024x768
(II) RADEON(0): Total number of valid Screen mode(s) added: 1
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): Output VGA-0 connected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Using user preference for initial modes
(II) RADEON(0): Output VGA-0 using initial mode 1024x768
(II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(**) RADEON(0): Display dimensions: (260, 195) mm
(**) RADEON(0): DPI set to (100, 133)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R7/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) RADEON(0): Using EXA acceleration architecture
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/X11R7/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 2.5.0
ABI class: X.Org Video Driver, version 6.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 \
support (--) Depth 24 pixmap format is 32 bpp
(II) RADEON(0): RADEONScreenInit e0000000 0 0
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable primary dac
(II) RADEON(0): Dynamic Power Management Disabled
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x10000000
(II) RADEON(0): MC_FB_LOCATION : 0xefffe000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 262144 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00400000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00404000
(II) RADEON(0): Will use 4096 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 4096 kb for back buffer at offset 0x00408000
(II) RADEON(0): Will use 4096 kb for depth buffer at offset 0x00808000
(II) RADEON(0): Will use 123904 kb for textures at offset 0x00c08000
(II) RADEON(0): Will use 125920 kb for X Server offscreen at offset 0x08508000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.4
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xe0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(==) RADEON(0): Using AGP 8x
(II) RADEON(0): [agp] Mode 0x1f000a0a [AGP 0x1106/0x0282; Card 0x1002/0x5961 \
0x18bc/0x0054] (II) RADEON(0): [agp] 65536 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xd0000000
(II) RADEON(0): [agp] Ring mapped at 0xb70a9000
(II) RADEON(0): [agp] ring read ptr handle = 0xd0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xb70a8000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xd0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xa6e1d000
(II) RADEON(0): [agp] GART texture map handle = 0xd0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xa321d000
(II) RADEON(0): [drm] register handle = 0x2f7e0000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0x1fff0000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): Option "BackingStore" "on"
(**) RADEON(0): Backing store enabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 62914560
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xefffe000 is: 0xefffe000
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xd3ffd000
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
(II) RADEON(0): MC_AGP_LOCATION : 0xd3ffd000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration enabled for R200 type cards.
(II) RADEON(0): Setting EXA maxPitchBytes
(II) EXA(0): Offscreen pixmap area of 128942080 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) UploadToScreen
(II) DownloadFromScreen
(II) RADEON(0): Acceleration enabled
(**) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): No video input capabilities detected and no information is provided - \
disabling multimedia i2c (II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/X11R7/lib/xorg/modules/multimedia/theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): Set up overlay video
(II) RADEON(0): Set up textured video
(II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
(II) RADEON(0): [XvMC] Extension initialized.
disable primary dac
disable TV
disable primary dac
init memmap
init common
init crtc1
init pll1
freq: 65000000
best_freq: 65000000
best_feedback_div: 130
best_frac_feedback_div: 0
best_ref_div: 9
best_post_div: 6
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
(II) RADEON(0): MC_AGP_LOCATION : 0xd3ffd000
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set primary dac
enable primary dac
disable TV
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(WW) RADEON(0): Option "SaveUnders" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: Interface 1.4 failed, trying 1.1
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/X11R7/lib/dri/r200_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 260 x 195
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Buttons" "5"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 9
(**) Option "Resolution" "1024"
(**) Mouse1: Resolution: 1024
(**) Mouse1: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(**) Mouse1: (accel) keeping acceleration scheme 1
(**) Mouse1: (accel) acceleration profile 0
(II) Mouse1: ps2EnableDataReporting: succeeded
(**) Option "CoreKeyboard"
(**) Keyboard1: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc101"
(**) Keyboard1: XkbModel: "pc101"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) RADEON(0): Damage tracking initialized for page flipping
(II) AIGLX: Suspending AIGLX clients for VT switch
disable primary dac
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x1fff0000 0xefffe000
(II) RADEON(0): MC_AGP_LOCATION : 0x27ff2000
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
_______________________________________________
xorg@lists.freedesktop.org: X.Org support
Archives: http://lists.freedesktop.org/archives/xorg
Info: http://lists.freedesktop.org/mailman/listinfo/xorg
Your subscription address: freedesktop-xorg@progressive-comp.com
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic