[prev in list] [next in list] [prev in thread] [next in thread] 

List:       freedesktop-xorg
Subject:    RE: xf86-video-intel : SDVO TV out  with Component output:
From:       "Jacques, Hugo" <Hugo.Jacques () verint ! com>
Date:       2009-03-31 11:42:02
Message-ID: 579B119545DAEF4689C8FBEEFEC5793F01D311EE6C19 () ATLMBX ! verint ! corp ! verintsystems ! com
[Download RAW message or body]

> > I am using an Add2 card with a CH7021 on SDVO-B (component output =
> CVBS) and a CH7307 for DVI-D on SDVO-C.
> 
> CVBS is composite output, component is YPrPb.

You are absolutely right.  Should have read my e-mail once more before sending ;)

> > Launching X with a VGA monitor connected to the Mobo and a plain old TV
> set to the Add2's CVBS, the TV gets no signal.
> > 
> > In the Xorg.0.log, I got:
> > 
> > (WW) intel(0): SDVOB: Unknown SDVO output type (0x0400)
> 
> Interesting, this looks violate SDVO spec. As device shouldn't have xxxx1
> output
> unless it has xxxx0 output, and only one TV output, so 0x0400 (CVBS1)
> should always
> be invalid. But real hw vendor could possibly break this as your case.
> 

Actually, because the code to dump the flag in case of unknown type is not \
little-endian friendly, an unknown type of 0x0400 in the log actually means 0x0040 \
which is really CVBS0.  There might not be any SDVO spec violation after all.

	memcpy (bytes, &flag, 2);
	xf86DrvMsg(intel_output->pI2CBus->scrnIndex, X_WARNING,
		   "%s: Unknown SDVO output type (0x%02x%02x)\n",
		   SDVO_NAME(dev_priv),
		   bytes[0], bytes[1]);

> > 
> > In i830_sdvo.c, function i830_sdvo_output_setup, it seems that the cases
> with flag = SDVO_OUTPUT_CVBS0 or SDVO_OUTPUT_CVBS1 or SDVO_OUTPUT_SVID1
> are not handled.
> > 

> > Feel free to integrate it. (Should I be entering this into Bugzilla?)
> > 
> 
> Looks ok to me, except it's not in diff format.
> Anyway I'll try to integrate it. Thanks.
> 

I will post a patch for CVBS0 in the right format at \
http://bugs.freedesktop.org/show_bug.cgi?id=20947

This electronic message may contain proprietary and confidential information of \
Verint Systems Inc., its affiliates and/or subsidiaries. The information is intended \
to be for the use of the individual(s) or entity(ies) named above.  If you are not \
the intended recipient (or authorized to receive this e-mail for the intended \
recipient), you may not use, copy, disclose or distribute to anyone this message or \
any information contained in this message.  If you have received this electronic \
message in error, please notify us by replying to this e-mail.

_______________________________________________
xorg mailing list
xorg@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/xorg


[prev in list] [next in list] [prev in thread] [next in thread]