[prev in list] [next in list] [prev in thread] [next in thread]
List: freedesktop-xorg
Subject: Re: General ATI TV-out problem with PAL B/G?
From: Alex Deucher <alexdeucher () gmail ! com>
Date: 2009-03-30 14:00:49
Message-ID: a728f9f90903300700l3fc85d03p66b04daa6196499d () mail ! gmail ! com
[Download RAW message or body]
On 3/30/09, Andreas Juch <xorg@juch.cc> wrote:
> Am Mon, 30 Mar 2009 02:42:30 -0400
> schrieb Alex Deucher <alexdeucher@gmail.com>:
>
>
> > On 3/27/09, Andreas Juch <xorg@juch.cc> wrote:
>
>
> > > Has anybody successfully got TV output working in continental
> > > europe? I know that the notebook with the radeon card is capable of
> > > TV output with the TV set in question when it's running Windows XP,
> > > so no hardware problem.
> >
> > PAL should work fine depending on what chip you are using. If you are
> > using an r1xx-r3xx based IGP chip, tv-out only works on NSTC at the
> > moment.
>
>
> Ok. I have a RV350 (Mobility Radeon 9600 M10) so this would explain the
> bad picture on the tv. Thanks for the info!
>
That chip should work fine. What version of the driver are you using?
PAL support was broken until 6.9.0.
> Just for my interest: Is there any documentation for what the registers
> in radeon_reg.h do? The code is quite hard to understand without docs.
> The 3D docs on http://www.x.org/docs/AMD/ didn't really help me.
Not at the moment.
Alex
_______________________________________________
xorg mailing list
xorg@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/xorg
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic