[prev in list] [next in list] [prev in thread] [next in thread]
List: freedesktop-xorg
Subject: 224MB for textures on Intel 950GM
From: "JOSE ANTONIO ANDUJAR CLAVELL" <jandujar () gigames ! es>
Date: 2008-09-29 15:18:14
Message-ID: 194CFCD1D3C718469895174129B60B74013C34E1 () exchange ! conei ! com
[Download RAW message or body]
[Attachment #2 (multipart/alternative)]
Hello,
I'm developing a game with uses a lot of textures and something goes wrong with 224MB \
memory allocation for the intel 950GM using the driver i915.
I developed a tool to "compress" some textures and see the amount of memory used for \
my game.
On windows, with the Intel's driver, I can play my game that uses 180MB for textures, \
but this game doesn't work on the linux box, because is too slow.
I think there is a problem with the DVMT (Dynamic Virtual Memory Technology) on the \
linux. It seems that the linux box can only use 128MB of fixed Memory, and cannot use \
the 224 of Max memory. (BIOS set to DVMT 224MB)
I forced VideoRam to 229376 (224MB) on X.org but no luck.
¿I need to patch the kernel or activate some driver option, so I can use the 224MB of \
Shared video RAM?
I attached some information about my linux box.
I'm running a debian etch.
I apologized for my English.
Thank's
***************AVISO LEGAL***************
"La información contenida en este correo electrónico es confidencial y está dirigida \
exclusivamente a el/los receptor/es que aparecen como destinatarios. Si reciben este \
e-mail por error, rogamos contacten con el remitente y borren de su ordenador el \
mensaje y el material anexo que pueda contener, no estando permitido su uso, \
modificación, copia, distribución, almacenamiento y/o revelación total o parcial por \
cualquier medio. El remitente no asume ningún tipo de responsabilidad si este correo \
electrónico pudiera contener algún virus informático que hubiese escapado a nuestro \
exhaustivo control."
***************DISCLAIMER****************
"The information contained in this e-mail is confidential and is intended for the \
recipient/s only. If you have received this e-mail by error, please notify us \
immediately by reply and then delete it and the annexed material that may contain \
from your system, not being allowed its modification, copy, distribution, storage \
and/or total or partial disclosure by any means. The sender does not assume any \
responsibility in case this e-mail could include any computer science virus that may \
have escaped our exhaustive control."
[Attachment #5 (text/html)]
<html xmlns:o="urn:schemas-microsoft-com:office:office" \
xmlns:w="urn:schemas-microsoft-com:office:word" \
xmlns="http://www.w3.org/TR/REC-html40">
<head>
<meta http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<meta name=Generator content="Microsoft Word 11 (filtered medium)">
<style>
<!--
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman";}
a:link, span.MsoHyperlink
{color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{color:purple;
text-decoration:underline;}
span.EstiloCorreo17
{mso-style-type:personal-compose;
font-family:Arial;
color:windowtext;}
@page Section1
{size:595.3pt 841.9pt;
margin:70.85pt 3.0cm 70.85pt 3.0cm;}
div.Section1
{page:Section1;}
-->
</style>
</head>
<body lang=ES link=blue vlink=purple>
<div class=Section1>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>Hello,<o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'><o:p> </o:p></span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span lang=EN-GB style='font-size:
10.0pt;font-family:Arial'>I’m developing a game with uses a lot of
textures and something goes wrong with 224MB memory allocation for the intel
950GM using the driver i915.<o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span lang=EN-GB style='font-size:
10.0pt;font-family:Arial'><o:p> </o:p></span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span lang=EN-GB style='font-size:
10.0pt;font-family:Arial'>I developed a tool to “compress” some
textures and see the amount of memory used for my game.<o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span lang=EN-GB style='font-size:
10.0pt;font-family:Arial'>On windows, with the Intel’s driver, I can play
my game that uses 180MB for textures, but this game doesn’t work on the
linux box, because is too slow.<o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span lang=EN-GB style='font-size:
10.0pt;font-family:Arial'><o:p> </o:p></span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span lang=EN-GB style='font-size:
10.0pt;font-family:Arial'>I think there is a problem with the DVMT (Dynamic Virtual
Memory Technology) on the linux. It seems that the linux box can only use 128MB
of fixed Memory, and cannot use the 224 of Max memory. (BIOS set to DVMT \
224MB)<o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span lang=EN-GB style='font-size:
10.0pt;font-family:Arial'><o:p> </o:p></span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span lang=EN-GB style='font-size:
10.0pt;font-family:Arial'>I forced VideoRam to 229376 (224MB) on X.org but no
luck.<o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span lang=EN-GB style='font-size:
10.0pt;font-family:Arial'><o:p> </o:p></span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span lang=EN-GB style='font-size:
10.0pt;font-family:Arial'>¿I need to patch the kernel or activate some driver
option, so I can use the 224MB of Shared video RAM?<o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span lang=EN-GB style='font-size:
10.0pt;font-family:Arial'><o:p> </o:p></span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span lang=EN-GB style='font-size:
10.0pt;font-family:Arial'>I attached some information about my linux \
box.<o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span lang=EN-GB style='font-size:
10.0pt;font-family:Arial'>I’m running a debian \
etch.<o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span lang=EN-GB style='font-size:
10.0pt;font-family:Arial'><o:p> </o:p></span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span lang=EN-GB style='font-size:
10.0pt;font-family:Arial'>I apologized for my English.<o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span lang=EN-GB style='font-size:
10.0pt;font-family:Arial'><o:p> </o:p></span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span lang=EN-GB style='font-size:
10.0pt;font-family:Arial'>Thank’s<o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span lang=EN-GB style='font-size:
10.0pt;font-family:Arial'><o:p> </o:p></span></font></p>
</div>
<pre>***************AVISO LEGAL***************
"La información contenida en este correo electrónico es confidencial y está dirigida \
exclusivamente a el/los receptor/es que aparecen como destinatarios. Si reciben este \
e-mail por error, rogamos contacten con el remitente y borren de su ordenador el \
mensaje y el material anexo que pueda contener, no estando permitido su uso, \
modificación, copia, distribución, almacenamiento y/o revelación total o parcial por \
cualquier medio. El remitente no asume ningún tipo de responsabilidad si este correo \
electrónico pudiera contener algún virus informático que hubiese escapado a nuestro \
exhaustivo control."
***************DISCLAIMER****************
"The information contained in this e-mail is confidential and is intended for the \
recipient/s only. If you have received this e-mail by error, please notify us \
immediately by reply and then delete it and the annexed material that may contain \
from your system, not being allowed its modification, copy, distribution, storage \
and/or total or partial disclosure by any means. The sender does not assume any \
responsibility in case this e-mail could include any computer science virus that may \
have escaped our exhaustive control." </pre></body>
</html>
["dmesg.txt" (text/plain)]
Linux version 2.6.27-rc4 (root@pendrive) (gcc version 4.1.2 20061115 (prerelease) \
(Debian 4.1.1-21)) #2 SMP Wed Sep 24 08:48:18 CEST 2008 BIOS-provided physical RAM \
map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f690000 (usable)
BIOS-e820: 000000003f690000 - 000000003f6e3000 (ACPI NVS)
BIOS-e820: 000000003f6e3000 - 000000003f6f0000 (ACPI data)
BIOS-e820: 000000003f6f0000 - 000000003f700000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
last_pfn = 0x3f690 max_arch_pfn = 0x100000
kernel direct mapping tables up to 38000000 @ 7000-c000
DMI 2.5 present.
ACPI: RSDP 000F7CB0, 0014 (r0 Shuttl)
ACPI: RSDT 3F6E3000, 003C (r1 Shuttl Shuttle 42302E31 AWRD 0)
ACPI: FACP 3F6E3080, 0074 (r1 Shuttl Shuttle 42302E31 AWRD 0)
ACPI: DSDT 3F6E3100, 410F (r1 SHUTTL SD30V20 1000 MSFT 3000000)
ACPI: FACS 3F690000, 0040
ACPI: HPET 3F6E7300, 0038 (r1 Shuttl Shuttle 42302E31 AWRD 98)
ACPI: MCFG 3F6E7340, 003C (r1 Shuttl Shuttle 42302E31 AWRD 0)
ACPI: SLIC 3F6E7380, 0176 (r1 Shuttl Shuttle 42302E31 AWRD 0)
ACPI: APIC 3F6E7240, 0084 (r1 Shuttl Shuttle 42302E31 AWRD 0)
ACPI: SSDT 3F6E7C20, 07EF (r1 PmRef CpuPm 3000 INTL 20041203)
118MB HIGHMEM available.
896MB LOWMEM available.
mapped low ram: 0 - 38000000
low ram: 00000000 - 38000000
bootmap 00008000 - 0000f000
(8 early reservations) ==> bootmem [0000000000 - 0038000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00006b2bb0] TEXT DATA BSS ==> [0000100000 - 00006b2bb0]
#4 [00006b3000 - 00006b6000] INIT_PG_TABLE ==> [00006b3000 - 00006b6000]
#5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
#7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
found SMP MP-table at [c00f3a10] 000f3a10
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x00038000
HighMem 0x00038000 -> 0x0003f690
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0003f690
On node 0 totalpages: 259631
free_area_init_node: node 0, pgdat c05a0e40, node_mem_map c1000000
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 30114 pages, LIFO batch:7
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 2 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Allocating PCI resources starting at 40000000 (gap: 3f700000:a0900000)
PERCPU: Allocating 36636 bytes of per cpu data
NR_CPUS: 8, nr_cpu_ids: 4, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257601
Kernel command line: root=/dev/sdb1 ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC calibrated against PM_TIMER
Detected 1808.118 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1023284k/1038912k available (3458k kernel code, 14960k reserved, 1623k data, \
364k init, 121408k highmem) virtual kernel memory layout:
fixmap : 0xfff51000 - 0xfffff000 ( 696 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc05fe000 - 0xc0659000 ( 364 kB)
.data : 0xc0460915 - 0xc05f65ac (1623 kB)
.text : 0xc0100000 - 0xc0460915 (3458 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. 3616.23 \
BogoMIPS (lpj=7232472) Security Framework initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080609
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz stepping 0d
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3616.19 BogoMIPS (lpj=7232388)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz stepping 0d
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (7232.43 BogoMIPS).
net_namespace: 452 bytes
NET: Registered protocol family 16
No dock devices found.
EISA bus registered
ACPI: bus type pci registered
PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG \
support.
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:01:0a.0: supports D2
pci 0000:01:0a.0: PME# supported from D2 D3hot D3cold
pci 0000:01:0a.0: PME# disabled
pci 0000:01:0b.0: supports D1
pci 0000:01:0b.0: supports D2
pci 0000:01:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:0b.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
PCI: bridge 0000:00:1e.0 io port: [efff0000e000, 8a6000f78de25c]
PCI: bridge 0000:00:1e.0 32bit mmio: [fdeffffffde00000, 8a6000f78de25c]
PCI: bridge 0000:00:1e.0 64bit mmio pref: [fddffffffdd00000, f78de25c]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x290-0x29f has been reserved
system 00:01: ioport range 0x800-0x87f has been reserved
system 00:01: ioport range 0x880-0x88f has been reserved
system 00:0c: ioport range 0x400-0x4bf could not be reserved
system 00:0e: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:0f: iomem range 0xf0000-0xfffff could not be reserved
system 00:0f: iomem range 0xfed00000-0xfed000ff could not be reserved
system 00:0f: iomem range 0x3f690000-0x3f6fffff could not be reserved
system 00:0f: iomem range 0x0-0x9ffff could not be reserved
system 00:0f: iomem range 0x100000-0x3f68ffff could not be reserved
system 00:0f: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0f: iomem range 0xfed13000-0xfed1dfff could not be reserved
system 00:0f: iomem range 0xfed20000-0xfed8ffff could not be reserved
system 00:0f: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:0f: iomem range 0xffb00000-0xffb7ffff could not be reserved
system 00:0f: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:0f: iomem range 0xe0000-0xeffff has been reserved
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1e.0: IO window: 0xe000-0xefff
pci 0000:00:1e.0: MEM window: 0xfde00000-0xfdefffff
pci 0000:00:1e.0: PREFETCH window: 0x000000fdd00000-0x000000fddfffff
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [ffff00000000, f78a6400]
bus: 00 index 1 mmio: [ffffffff00000000, f78a6400]
bus: 01 index 0 io port: [efff0000e000, f78a6400f78de000]
bus: 01 index 1 mmio: [fdeffffffde00000, f78a6400f78de000]
bus: 01 index 2 mmio: [fddffffffdd00000, f78a6400f78de000]
bus: 01 index 3 io port: [ffff00000000, f78a6400f78de000]
bus: 01 index 4 mmio: [ffffffff00000000, f78a6400f78de000]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
audit: initializing netlink socket (disabled)
type=2000 audit(1222698135.252:1): initialized
highmem bounce pool size: 64 pages
fuse init (API version 7.9)
msgmni has been set to 1762
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN] (on)
ACPI: SSDT 3F6E7540, 028B (r1 PmRef Cpu0Ist 3000 INTL 20041203)
processor ACPI0007:00: registered as cooling_device1
ACPI: SSDT 3F6E7A60, 01B3 (r1 PmRef Cpu1Ist 3000 INTL 20041203)
processor ACPI0007:01: registered as cooling_device2
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (-73 C)
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
ipmi message handler version 39.2
ipmi device interface
IPMI System Interface driver.
ipmi_si: Unable to find any System Interface(s)
IPMI Watchdog: driver initialized
Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
nbd: registered device at major 43
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation \
enabled).
CSLIP: code copyright 1989 Regents of the University of California.
SLIP linefill/keepalive option.
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x01)
pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
piix 0000:00:1f.1: IDE port disabled
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfa00-0xfa07
Probing IDE interface ide0...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA \
IDE ports
ide_generic: I/O resource 0x1F0-0x1F7 not free.
ide_generic: I/O resource 0x170-0x177 not free.
ide-floppy driver 1.00
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2456]-ms
scsi: <fdomain> Detection failed (no card)
QLogic Fibre Channel HBA Driver: 8.02.01-k7
Emulex LightPulse Fibre Channel SCSI driver 8.2.7
Copyright(c) 2004-2008 Emulex. All rights reserved.
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
nsp32: loading...
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
SCSI Media Changer driver v0.25
Driver 'ch' needs updating - please use bus_type methods
scsi0 : scsi_debug, version 1.81 [20070104], dev_size_mb=8, opts=0x0
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
scsi 0:0:0:0: Direct-Access Linux scsi_debug 0004 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi1 : ata_piix
scsi2 : ata_piix
ata1: SATA max UDMA/133 cmd 0xf900 ctl 0xf800 bmdma 0xf500 irq 19
sd 0:0:0:0: [sda] 16384 512-byte hardware sectors (8 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 73 00 10 08
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
ata2: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf508 irq 19
sd 0:0:0:0: [sda] 16384 512-byte hardware sectors (8 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 73 00 10 08
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
sda: unknown partition table
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
ata1.00: ATA-7: MAXTOR STM3160211AS, 3.AAE, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA MAXTOR STM316021 3.AA PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or \
FUA sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or \
FUA sdb: sdb1 sdb2 < sdb5 >
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 1:0:0:0: Attached scsi generic sg1 type 0
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-8: new high speed USB device using ehci_hcd and address 2
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-8: configuration #1 chosen from 3 choices
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input2
input: PC Speaker as /class/input/input3
logips2pp: Detected unknown logitech mouse model 115
input: ImExPS/2 Logitech Explorer Mouse as /class/input/input4
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
TCP bic registered
TCP cubic registered
TCP westwood registered
TCP highspeed registered
TCP hybla registered
TCP htcp registered
TCP vegas registered
TCP veno registered
TCP scalable registered
TCP lp registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
NET: Registered protocol family 15
NET: Registered protocol family 33
Starting balanced_irq
Using IPI No-Shortcut mode
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
EXT2-fs warning (device sdb1): ext2_fill_super: mounting ext3 filesystem as ext2
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 364k freed
agpgart-intel 0000:00:00.0: Intel 945G Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
skge 0000:01:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
skge 1.13 addr 0xfdef8000 irq 19 chip Yukon-Lite rev 9
skge eth0: addr 00:30:1b:45:a8:be
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
Adding 2650684k swap on /dev/sdb5. Priority:-1 extents:1 across:2650684k
skge eth4: enabling interface
ADDRCONF(NETDEV_UP): eth4: link is not ready
skge eth4: Link is up at 100 Mbps, full duplex, flow control none
ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready
warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
[drm] Initialized i915 1.6.0 20080730 on minor 0
eth4: no IPv6 routers present
["Xorg.0.log" (application/octet-stream)]
["lsmod.txt" (text/plain)]
Module Size Used by
i915 50564 3
drm 73064 4 i915
snd_hda_intel 327692 0
snd_pcm_oss 33056 0
snd_mixer_oss 12736 1 snd_pcm_oss
snd_pcm 62404 2 snd_hda_intel,snd_pcm_oss
snd_timer 17928 1 snd_pcm
skge 33872 0
intel_agp 23292 1
snd 45924 5 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 6816 1 snd
snd_page_alloc 7816 2 snd_hda_intel,snd_pcm
["lspci.txt" (text/plain)]
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
01:0a.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev c0)
01:0b.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
["uname.txt" (text/plain)]
Linux pendrive 2.6.27-rc4 #2 SMP Wed Sep 24 08:48:18 CEST 2008 i686 GNU/Linux
["xorg.txt" (text/plain)]
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
Load "dbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "es"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "explorerPS/2"
Option "Emulate3Buttons" "true"
EndSection
Section "Device"
Identifier "Generic Video Card"
Driver "i810"
#Driver "intel"
#Option "DRI" "true"
#Option "RenderAccel" "true"
#Option "AllowGLXWithComposite" "true"
#Driver "intel"
VideoRam 229376
#Option "AccelMethod" "EXA"
#Option "AccelMethod" "XAA"
#Option "MigrationHeuristic" "greedy"
#Option "XAANoOffscreenPixmaps" "true"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
#HorizSync 47.3
#VertRefresh 60
ModeLine "1366x768" 85.0 1366 1430 1574 1782 768 769 772 795
#ModeLine "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 16
SubSection "Display"
Depth 16
#Modes "samsungwxga" "1366x768" "1024x768"
Modes "1366x768" "1024x768"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
#InputDevice "TouchScreen" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "InputDevice"
Identifier "TouchScreen"
Driver "TWXinput"
Option "Device" "/dev/twscreen0"
Option "Mapping" ""
EndSection
_______________________________________________
xorg mailing list
xorg@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/xorg
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic