[prev in list] [next in list] [prev in thread] [next in thread]
List: freedesktop-xorg
Subject: Re: Hungarian layout problem with evdev driver
From: Ander Conselvan de Oliveira <ander () c3sl ! ufpr ! br>
Date: 2006-06-30 23:37:53
Message-ID: 44A5B5D1.4010003 () c3sl ! ufpr ! br
[Download RAW message or body]
Zoltan Boszormenyi wrote:
> Ander Conselvan de Oliveira írta:
>> Zoltan Boszormenyi wrote:
>>> I wanted to try whether a stock system with the "evdev" X driver
>>> can be used instead for the stock evdev kernel driver but I run
>>> into a problem with the hungarian layout. I have specified this
>>> section below for one of my keyboards:
>>>
>>> Section "InputDevice"
>>> Identifier "Keyboard1"
>>> Driver "evdev"
>>> Option "Device" "/dev/input/event2"
>>> # Option "XkbModel" "pc105"
>>> Option "XkbLayout" "hu"
>>> EndSection
>>
>> I guess it should be "XkbModel" "evdev".
>
> It's the default for the "evdev" driver according to the man page.
> It's working basically as "XkbModel" "pc104" on the "kbd" driver.
For the Brazillian ABNT2 keyboard, it was necessary to use a especially
made model definition: evdev_abnt2. Apparently, the kernel should map
the keys to symbols, but the evdev protocol just send keycodes, not
symbols. I guess you will have to make a evdev_hungarian model definition.
Regards,
Ander
--
Ander Conselvan de Oliveira
C3SL - Centro de Computação Científica e Software Livre
www.c3sl.ufpr.br
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic