[prev in list] [next in list] [prev in thread] [next in thread] 

List:       freedesktop-xorg
Subject:    Re: Fwd: Problem with intel 945G in "twin" mode
From:       Alan Hourihane <alanh () fairlite ! demon ! co ! uk>
Date:       2006-05-29 9:22:43
Message-ID: 1148894563.10574.5.camel () jetpack ! demon ! co ! uk
[Download RAW message or body]

Rohnny,

Your config file isn't correct. You need to insert

Screen 0

and

Screen 1

into your Device Sections for dual head to operate.

Alan.

On Sat, 2006-05-27 at 11:39 +0200, Rohnny Moland wrote:
> ---------- Forwarded message ----------
> From: Rohnny Moland <rmoland@gmail.com>
> Date: May 27, 2006 11:38 AM
> Subject: Re: Problem with intel 945G in "twin" mode
> To: Dave Airlie <airlied@gmail.com>
> 
> 
> Hi Dave,
> 
> Thanks for your reply. I have attached the log and config file.
> 
> Regards,
> Rohnny
> 
> On 5/27/06, Dave Airlie <airlied@gmail.com> wrote:
> > could you attach xorg.0.log? and xorg.conf the warnings are only warnings..
> >
> > Dave
> >
> > On 5/27/06, Rohnny Moland <rmoland@gmail.com> wrote:
> > > Hi,
> > >
> > > I am trying to setup suse 10.1 with two monitors (in twin mode - as
> > > one big screen). In xorg I have set Xinerama to true, and also setup 2
> > > monitor, device and screen sections in xorg.conf.
> > >
> > > When I run, the screens are just cloned. In xorg.0.log I get this warning:
> > >
> > > (WW) I810(0): Bad V_BIOS checksum
> > >
> > > ..and also this one:
> > >
> > > (WW) I810(0): Extended BIOS function 0x5f28 not supported.
> > >
> > > Also display plane b is disabled for some reason:
> > >
> > > (II) I810(0): Display plane A is enabled and connected to Pipe A.
> > > (II) I810(0): Display plane B is disabled and connected to Pipe B.
> > > (II) I810(0): Enabling plane A.
> > > (II) I810(0): Display plane A is now enabled and connected to Pipe A.
> > > (II) I810(0): Display plane B is now disabled and connected to Pipe B.
> > > (II) I810(0): PIPEACONF is 0x80000000
> > > (II) I810(0): PIPEBCONF is 0x80000000
> > >
> > > I wonder if someone know what the reason could be for this, and how I
> > > can get twin mode to work. I am using SuSE 10.1 with xorg 6.9.0.
> > > Kernel version: 2.6.16.13-4. The graphics card is intel 945G, using
> > > the i810 driver.
> > >
> > >
> > > Thanks in advance,
> > >
> > > Rohnny
> > > _______________________________________________
> > > xorg mailing list
> > > xorg@lists.freedesktop.org
> > > http://lists.freedesktop.org/mailman/listinfo/xorg
> > >
> >
> _______________________________________________
> xorg mailing list
> xorg@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/xorg


[prev in list] [next in list] [prev in thread] [next in thread]