[prev in list] [next in list] [prev in thread] [next in thread] 

List:       freebsd-wireless
Subject:    Re: Atheros QCA9377 driver?
From:       Adrian Chadd <adrian.chadd () gmail ! com>
Date:       2017-07-21 20:27:00
Message-ID: CAJ-Vmo=O4hRX+ZmOYSh9Yjpn7-PENMvzz7Y53uLHUMTn4Y-hUg () mail ! gmail ! com
[Download RAW message or body]

hi

QCA9377 will require ath10k to show up in freebsd-head. It's not an
11n part like the other AR93xx / AR95xx series part numbers.



-adrian


On 20 July 2017 at 19:00, Da Rock
<freebsd-wireless@herveybayaustralia.com.au> wrote:
> I just got a new laptop which I went to the trouble of testing hardware
> prior (worked afaict btw - FBSD11-RC3), but now in the light of day I have
> done the full install and now computer says no. The only diff I can tell is
> I used the iso for the test image, and now I used the memstick image - ce la
> vie.
>
> What I need to know is that the various freebsd wiki pages for wifi mention
> the 9300's are different and work needs to be done for support, that -head
> should just work now, and the real kicker - it was updated about 3-4 years
> ago! So FBSD11 should definitely be considered a derivative of -head by now,
> right?
>
> I'll also point out that it specifically mentioned a porting back to -9, so
> there's that also. This was in ath_hal/9300
>
> Bottom line: so what's the status? And if it should be going, why isn't it?
>
> cheers
>
> _______________________________________________
> freebsd-wireless@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.org"
_______________________________________________
freebsd-wireless@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.org"
[prev in list] [next in list] [prev in thread] [next in thread]