[prev in list] [next in list] [prev in thread] [next in thread] 

List:       freebsd-stable
Subject:    Re: Trouble with sata dvdram drive on 10.1.
From:       Евгений Б. Спамак� <spamak
Date:       2015-02-06 11:32:17
Message-ID: CAMUQELCWwc5KrhHh6x=5tX4dHJT2+k1c_EOwqENk=1KpNqZZ8A () mail ! gmail ! com
[Download RAW message or body]

False alarm.
Apologies for being such an ass: I had a stale (compiled under 9.2)
hald-addon-storage running that was polling the device.


On Fri, Feb 6, 2015 at 12:00 PM, Евгений Б. Спамаковский <
spamakowski@gmail.com> wrote:

> I upgraded from 9.2 to 10.1 yesterday night, and since then am getting
> repeated timeout messages:
>
> ahcich5: Timeout on slot 0 port 0
> ahcich5: is 00000000 cs 00000001 ss 00000000 rs 00000001 tfd 58 serr
> 00000000 cmd 0000e017
> ahcich5: Timeout on slot 0 port 0
> ahcich5: is 00000000 cs 00000001 ss 00000000 rs 00000001 tfd 58 serr
> 00000000 cmd 0000e017
> ahcich5: Timeout on slot 0 port 0
> ahcich5: is 00000000 cs 00000001 ss 00000000 rs 00000001 tfd 58 serr
> 00000000 cmd 0000e017
> ...etc, a few seconds apart.  Also the drive doesn't work.
> I made no hardware changes in the course of the upgrade - it's simply
> a new kernel in action.
>
> The relevant bits of dmesg (let me know if I should supply more):
> ...
> box kernel: ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port
> 0xb000-0xb007,0xa000-0xa003,0x9000-0x9007,0x8000-0x8003,0x7000-0x700f
> mem 0xf9dfe400-0xf9dfe7ff irq 22 at device 17.0 on pci0
> box kernel: ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported
> box kernel: ahcich0: <AHCI channel> at channel 0 on ahci0
> box kernel: ahcich1: <AHCI channel> at channel 1 on ahci0
> box kernel: ahcich2: <AHCI channel> at channel 2 on ahci0
> box kernel: ahcich3: <AHCI channel> at channel 3 on ahci0
> box kernel: ahcich4: <AHCI channel> at channel 4 on ahci0
> box kernel: ahcich5: <AHCI channel> at channel 5 on ahci0
> ...
> box kernel: cd0 at ahcich5 bus 0 scbus5 target 0 lun 0
> box kernel: cd0: <HL-DT-ST DVDRAM GH24NSB0 LN00> Removable CD-ROM SCSI-0
> device
> box kernel: cd0: Serial Number <foo>
> box kernel: cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI
> 12bytes, PIO 8192bytes)
> box kernel: cd0: cd present [1 x 2048 byte records]
> ...
>
>
> Any ideas?
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
>
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
[prev in list] [next in list] [prev in thread] [next in thread]