[prev in list] [next in list] [prev in thread] [next in thread] 

List:       freebsd-stable
Subject:    da doesn't attach to usb memory card
From:       Marton Kenyeres <mkenyeres () konvergencia ! hu>
Date:       2003-11-26 16:14:34
[Download RAW message or body]

Hi all,

I'm playing with a usb memory card (aka. pen drive) which identifies itself 
as:

/kernel: umass0: Intelligent Stick Intelligent Stick, rev 1.10/1.00, addr 2

My current system is 4.9-STABLE built from todays sources. The problem is that 
allthough the umass driver attaches to the device, da does not.

# camcontrol devlist
<USB Card Intelligent Stic 2.02>   at scbus0 target 0 lun 0 (pass0)

No sign of da0 in dmesg either :/

If I issue a camcontrol rescan command only thing I get is:

/kernel: umass0: BBB reset failed, TIMEOUT
/kernel: umass0: BBB bulk-in clear stall failed, TIMEOUT
/kernel: umass0: BBB bulk-out clear stall failed, TIMEOUT

repeating endlessly.

Strange enough the same device did show up as da0 with a 4.9-RC kernel built 
on  October 20th:

/kernel: da0 at umass-sim0 bus 0 target 0 lun 0
/kernel: da0: <USB Card Intelligent Stic 2.02> Removable Direct Access SCSI-2 
device
/kernel: da0: 650KB/s transfers
/kernel: da0: 127MB (260800 512 byte sectors: 64H 32S/T 127C)

It even worked if I booted with the device plugged in.

I can test any patches/provide more info on request. Any ideas, RTFMs, hints 
wellcome.

Cheers,

-- 
Marton Kenyeres - mkenyeres@konvergencia.hu
KVG Konvergencia Kft.

_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
[prev in list] [next in list] [prev in thread] [next in thread]