[prev in list] [next in list] [prev in thread] [next in thread]
List: freebsd-scsi
Subject: Re: Different init speeds of raid5 plex subdisks under vinum
From: John Lengeling <johnl () raccoon ! com>
Date: 2000-08-22 6:13:28
[Download RAW message or body]
sthaug@nethelp.no wrote:
>
> > When I ran the vinum init command to initialize the plex, one of the
> > drives da2 completed the initialization 3-4 times faster than da1
> > and da3. Something like 20 minutes for da2 versus 60 minutes for
> > da1/da3. Both da1 and da3 initialized at the same rate. Is this
> > weird? Did da3/da1 get transfers negotiated down to slower speeds?
> > Bad cabling?
>
> I noticed a similar problem when initializing a 4-disk RAID5 array some
> weeks ago. In my case I had two disks on ATA-66 controllers and two disks
> on ATA-33 - and the ATA-66 connected disks initialized at roughly double
> the rate of the ATA-33 connected disks. I simply assumed it was due to
> difference between the ATA-66 and ATA-33 speeds.
>
> Steinar Haug, Nethelp consulting, sthaug@nethelp.no
All 3 drives are on the same SCSI bus in my case. Thanks
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic