[prev in list] [next in list] [prev in thread] [next in thread] 

List:       freebsd-scsi
Subject:    Re: BDR messages for Adaptec card
From:       Anatoliy Dmytriyev <tolid () plab ! ku ! dk>
Date:       2004-03-15 15:24:19
Message-ID: 20040315162419.52680188 () eagle ! plab ! ku ! dk
[Download RAW message or body]

On Tue, 9 Mar 2004 22:53:54 -0800 (PST)
fc scsi <scsi_fc_group@yahoo.com> wrote:

> Hi,
>  
> I enabled CAMDEBUG in the kernel and got the logs at the time the problem
> happens. I have trimmed down the logs considerably as it generated a huge
> file. If after looking at the logs someone can even explain me what the
> problem might be (without bothering for the solution) it would be a great
> help.
>  
> Thanks.
> 
> fc scsi <scsi_fc_group@yahoo.com> wrote: 
> 
> Hi,
> 
> I am getting the error messages mentioned below on my system using the
> following Adaptec card on FreeBSD 4.7:
> 
> ========================================================================
> 
> ahc0: <Adaptec 29160B Ultra160 SCSI adapter> port 0xde00-0xdeff mem
> 0xfe9df000-0


I had the same problem with <Adaptec 29160 Ultra160 SCSI adapter>. Somebody
said that problem is in broken hard drives but in my case I found problem in the
bad scsi terminator. So, try to check it and maybe it can help you.


Best regards,
Anatoliy Dmytriyev

-- 
Anatoliy Dmytriyev <tolid@plab.ku.dk>

_______________________________________________
freebsd-scsi@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org"
[prev in list] [next in list] [prev in thread] [next in thread]