[prev in list] [next in list] [prev in thread] [next in thread]
List: freebsd-scsi
Subject: RE: Output - Intel SE7501WV2 SCSI ISSUES
From: The Hermit Hacker <scrappy () hub ! org>
Date: 2003-06-23 22:16:19
[Download RAW message or body]
'K, we're running two of these boxes and, to date, haven't had any
problems that weren't hardware (or BIOS) related ... first question, have
you made sure that all the various BIOS's have been upgraded?
On Wed, 23 Jul 2003, roger wrote:
> I have a new intel server with the SE7501WV2 Motherboard installed.
>
> AIC 7902 Controller.
>
> I have installed 6 Seagate SCSI Drive (U320) and cannot get Freebsd 4.8
> to install
> With more that 4 drives? I have also tried 5.0 and 5.1 where arfter the
> fourth drive is installed the systems hangs. On boot where is says
> waiting 15 sec for SCSI devices to settle - this is where it hangs??
>
> Can you help?
>
> Thanks,
>
> Roger.
>
> -----Original Message-----
> From: roger [mailto:roger@offmyserver.com]
> Sent: Wednesday, July 23, 2003 10:24 AM
> To: 'Murray Stokely'
> Cc: 'scott1@freebsd.org'; 'gibbs@freebsd.org'
> Subject: Re: Output - new hardware
>
> Hello,
>
> Here is the dmesg and pciconf -lv output for the intel motherboard. I
> seem to be having some issues with the scsi controller ?
>
>
> Intel Motherboard - SE7501WV2 SCSI
>
> Pciconf -lv output
>
> hostb0@pci0:0:0: class=0x060000 card=0x341a8086 chip=0x254c8086
> rev=0x01 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'E7501 Host Controller'
> class = bridge
> subclass = HOST-PCI
> none0@pci0:0:1: class=0xff0000 card=0x341a8086 chip=0x25418086 rev=0x01
> hdr=0x00
> vendor = 'Intel Corporation'
> device = 'E7500 System Controller (MCH, Hub Interface A) Error
> Reporter'
> pcib1@pci0:3:0: class=0x060400 card=0x00000000 chip=0x25458086 rev=0x01
> hdr=0x01
> vendor = 'Intel Corporation'
> device = 'E7500/E7501 HI_C Virtual PCI-to-PCI Bridge'
> class = bridge
> subclass = PCI-PCI
> none1@pci0:3:1: class=0xff0000 card=0x341a8086 chip=0x25468086 rev=0x01
> hdr=0x00
> vendor = 'Intel Corporation'
> device = 'E7500/E7501 HI_C PCI-to-PCI Bridge Error Reporting'
> uhci0@pci0:29:0: class=0x0c0300 card=0x341a8086 chip=0x24828086
> rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller #1'
> class = serial bus
> subclass = USB
> uhci1@pci0:29:1: class=0x0c0300 card=0x341a8086 chip=0x24848086
> rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller #2'
> class = serial bus
> subclass = USB
> pcib4@pci0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086
> rev=0x42 hdr=0x01
> vendor = 'Intel Corporation'
> device = '82801BA/CA/DB (ICH2/3/4) Hub Interface to PCI Bridge
> (244E)'
> class = bridge
> subclass = PCI-PCI
> isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x24808086
> rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801CA/CAM (ICH3-S/ICH3-M) LPC Interface'
> class = bridge
> subclass = PCI-ISA
> atapci0@pci0:31:1: class=0x01018a card=0x341a8086 chip=0x248b8086
> rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801CA (ICH3) UltraATA/100 EIDE Controller'
> class = mass storage
> subclass = ATA
> none2@pci0:31:3: class=0x0c0500 card=0x341a8086 chip=0x24838086
> rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801CA/CAM (ICH3-S/ICH3-M) SMBus Controller'
> class = serial bus
> subclass = SMBus
> none3@pci2:28:0: class=0x080020 card=0x341a8086 chip=0x14618086
> rev=0x04 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82870P2 I/OxAPIC Interrupt Controller'
> class = base peripheral
> subclass = interrupt controller
> pcib2@pci2:29:0: class=0x060400 card=0x00000050 chip=0x14608086
> rev=0x04 hdr=0x01
> vendor = 'Intel Corporation'
> device = '82870P2 P64H2 PCI/PCI-X Hub Controller'
> class = bridge
> subclass = PCI-PCI
> none4@pci2:30:0: class=0x080020 card=0x341a8086 chip=0x14618086
> rev=0x04 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82870P2 I/OxAPIC Interrupt Controller'
> class = base peripheral
> subclass = interrupt controller
> pcib3@pci2:31:0: class=0x060400 card=0x00000050 chip=0x14608086
> rev=0x04 hdr=0x01
> vendor = 'Intel Corporation'
> device = '82870P2 P64H2 PCI/PCI-X Hub Controller'
> class = bridge
> subclass = PCI-PCI
> ahd0@pci4:7:0: class=0x010000 card=0x341a8086 chip=0x801f9005 rev=0x03
> hdr=0x00
> vendor = 'Adaptec'
> device = 'AIC-7902 Ultra320 SCSI Host Adapter'
> class = mass storage
> subclass = SCSI
> ahd1@pci4:7:1: class=0x010000 card=0x341a8086 chip=0x801f9005 rev=0x03
> hdr=0x00
> vendor = 'Adaptec'
> device = 'AIC-7902 Ultra320 SCSI Host Adapter'
> class = mass storage
> subclass = SCSI
> em0@pci3:7:0: class=0x020000 card=0x341a8086 chip=0x10108086 rev=0x01
> hdr=0x00
> vendor = 'Intel Corporation'
> device = '82546EB Gigabit Ethernet Controller (copper)'
> class = network
> subclass = ethernet
> em1@pci3:7:1: class=0x020000 card=0x341a8086 chip=0x10108086 rev=0x01
> hdr=0x00
> vendor = 'Intel Corporation'
> device = '82546EB Gigabit Ethernet Controller (copper)'
> class = network
> subclass = ethernet
> none5@pci1:12:0: class=0x030000 card=0x341a8086 chip=0x47521002
> rev=0x27 hdr=0x00
> vendor = 'ATI Technologies'
> device = 'Rage XL PCI'
> class = display
> subclass = VGA
>
> dmesg output:
>
> Copyright (c) 1992-2003 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights
> reserved. FreeBSD 5.1-RELEASE #0: Thu Jun 5 02:55:42 GMT 2003
> root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc06d4000. Preloaded elf
> module "/boot/kernel/acpi.ko" at 0xc06d4244. Timecounter "i8254"
> frequency 1193182 Hz Timecounter "TSC" frequency 2392291112 Hz
> CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2392.29-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
>
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE
> ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Hyperthreading: 2 logical CPUs
> real memory = 2147418112 (2047 MB)
> avail memory = 2082906112 (1986 MB)
> Pentium Pro MTRR support enabled
> ACPI-0660: *** Warning: Type override - [DEB_] had invalid type
> (Integer) for Scope operator, changed to (Scope)
> ACPI-0660: *** Warning: Type override - [MLIB] had invalid type
> (Integer) for Scope operator, changed to (Scope)
> ACPI-0660: *** Warning: Type override - [DATA] had invalid type
> (String) for Scope operator, changed to (Scope)
> ACPI-0660: *** Warning: Type override - [SIO_] had invalid type
> (String) for Scope operator, changed to (Scope)
> ACPI-0660: *** Warning: Type override - [LEDP] had invalid type
> (String) for Scope operator, changed to (Scope)
> ACPI-0660: *** Warning: Type override - [GPEN] had invalid type
> (String) for Scope operator, changed to (Scope)
> ACPI-0660: *** Warning: Type override - [GPST] had invalid type
> (String) for Scope operator, changed to (Scope)
> ACPI-0660: *** Warning: Type override - [WUES] had invalid type
> (String) for Scope operator, changed to (Scope)
> ACPI-0660: *** Warning: Type override - [WUSE] had invalid type
> (String) for Scope operator, changed to (Scope)
> ACPI-0660: *** Warning: Type override - [SBID] had invalid type
> (String) for Scope operator, changed to (Scope)
> ACPI-0660: *** Warning: Type override - [SWCE] had invalid type
> (String) for Scope operator, changed to (Scope)
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <INTEL SWV25 > on motherboard
> pcibios: BIOS version 2.10
> Using $PIR table, 19 entries at 0xc00f2f10
> acpi0: power button is handled as a fixed feature programming model.
> Timecounter "ACPI-fast" frequency 3579545 Hz
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> acpi_cpu0: <CPU> on acpi0
> acpi_cpu1: <CPU> on acpi0
> acpi_cpu2: <CPU> on acpi0
> acpi_cpu3: <CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pci0: <unknown> at device 0.1 (no driver attached)
> pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
> pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P5 -
> AE_NOT_FOUND
> pci2: <ACPI PCI bus> on pcib1
> pci2: <base peripheral, interrupt controller> at device 28.0 (no driver
> attached)
> pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci2
> pci4: <ACPI PCI bus> on pcib2
> ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port
> 0x4000-0x40ff,0x3800-0x38ff mem 0xfe8f0000-0xfe8f1fff irq 9 at device
> 7.0 on pci4
> aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
> ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port
> 0x3400-0x34ff,0x3000-0x30ff mem 0xfe9f0000-0xfe9f1fff irq 9 at device
> 7.1 on pci4
> aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
> pci2: <base peripheral, interrupt controller> at device 30.0 (no driver
> attached)
> pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci2
> pci3: <ACPI PCI bus> on pcib3
> em0: <Intel(R) PRO/1000 Network Connection, Version - 1.5.31> port
> 0x2040-0x207f mem 0xfe6c0000-0xfe6dffff irq 9 at device 7.0 on pci3
> em0: Speed:100 Mbps Duplex:Half
> em1: <Intel(R) PRO/1000 Network Connection, Version - 1.5.31> port
> 0x2000-0x203f mem 0xfe6e0000-0xfe6fffff irq 9 at device 7.1 on pci3
> em1: Speed:N/A Duplex:N/A
> pci0: <unknown> at device 3.1 (no driver attached)
> uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port
> 0x5020-0x503f irq 9 at device 29.0 on pci0
> usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port
> 0x5000-0x501f irq 10 at device 29.1 on pci0
> usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci1: <ACPI PCI bus> on pcib4
> pci1: <display, VGA> at device 12.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH3 UDMA100 controller> port
> 0x3a0-0x3af,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model Generic PS/2 mouse, device ID 0
> acpi_ec0: <embedded controller> port 0xca7,0xca6 on acpi0
> fdc0: cmd 3 failed at out byte 1 of 3
> sio0 port 0x3f8-0x3ff irq 4 on acpi0
> sio0: type 16550A
> sio1 port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> fdc0: cmd 3 failed at out byte 1 of 3
> orm0: <Option ROMs> at iomem
> 0xc9800-0xcafff,0xc8000-0xc97ff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0
> fdc0: cannot reserve I/O port range (6 ports)
> ppc0: parallel port not found.
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0 Timecounters tick every 10.000 msec
> acd0: CDROM <SAMSUNG CD-ROM SN-124> at ata1-master PIO4
> Waiting 15 seconds for SCSI devices to settle
> ses0 at ahd1 bus 0 target 6 lun 0
> ses0: <ESG-SHV SCA HSBP M16 0.05> Fixed Processor SCSI-2 device
> ses0: 3.300MB/s transfers
> ses0: SAF-TE Compliant Device
> da0 at ahd1 bus 0 target 0 lun 0
> da0: <SEAGATE ST373453LC 0005> Fixed Direct Access SCSI-3 device
> da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged
> Queueing Enabled
> da0: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C) Mounting
> root from ufs:/dev/da0s1a
>
> Thanks,
>
> Roger@offmyserver.com
>
>
> -----Original Message-----
> From: Murray Stokely [mailto:murray@freebsdmall.com]
> Sent: Friday, June 20, 2003 6:14 PM
> To: roger@offmyserver.com
> Cc: Matt Olander
> Subject: Re: heading south
>
> Hey Roger,
>
> Whenever you get your hands on a new peice of hardware that comes up
> as "Unknown Device.." in the FreeBSD boot messages (and from dmesg)
> but actually works OK, then that just means we have to add a one line
> change to the FreeBSD kernel and I can do that in 30 seconds. All I
> need is some information about the device which can be found by
> typing:
>
> # pciconf -lv
>
> as root. This will display the PCI device ID, vendor ID, etc.. for
> all the PCI devices. I can then add this ID into the kernel.
>
> As for your SCSI problems, I don't have any slick new hardware like
> that but you can try emailing scsi@FreeBSD.org, or some of the
> individual Adaptec employees such as scottl@FreeBSD.org (Scott Long)
> and gibbs@FreeBSD.org (Justin Gibbs). Also check out the new 5.1 and
> see if it works. If it works there but not in 4.X then we can
> backport it for 4.9 (still several months out).
>
> - Murray
>
> _______________________________________________
> freebsd-scsi@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
> To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org"
>
Marc G. Fournier ICQ#7615664 IRC Nick: Scrappy
Systems Administrator @ hub.org
primary: scrappy@hub.org secondary: scrappy@{freebsd|postgresql}.org
_______________________________________________
freebsd-scsi@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org"
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic