[prev in list] [next in list] [prev in thread] [next in thread] 

List:       freebsd-scsi
Subject:    Re: SCSI Problems with sym and Western Digital on FreeBSD 4.7-stable
From:       Chuck McCrobie <mccrobie2000 () yahoo ! com>
Date:       2002-12-30 22:56:07
[Download RAW message or body]


--- "Justin T. Gibbs" <gibbs@scsiguy.com> wrote:
> > On Fri, 27 Dec 2002, Chuck McCrobie wrote:
> >> I am having SCSI problems with the sym driver and
> a
> >> Western Digital hard disk.  Under the -stable
> kernel
> >> built on 'Dec 1', the drive show up fine with
> 16-bit
> >> wide transfers at 40 MHz.  Under the most recent
> >> -stable kernel built on 'Dec 17', the Western
> Digital
> >> gets some type of very weird error message.  The
> >> Western Digital is "da1".
> > 
> >> (probe2:sym0:0:2:0): ODD transfer in DATA IN
> phase.
> >> (probe2:sym0:0:2:0): COMMAND FAILED (87 0 10).
> >> (probe2:sym0:0:2:0): ODD transfer in DATA IN
> phase.
> >> (probe2:sym0:0:2:0): COMMAND FAILED (87 0 10).
> >> (probe2:sym0:0:2:0): ODD transfer in DATA IN
> phase.
> >> (probe2:sym0:0:2:0): COMMAND FAILED (87 0 10).
> >> (probe2:sym0:0:2:0): ODD transfer in DATA IN
> phase.
> >> (probe2:sym0:0:2:0): COMMAND FAILED (87 0 10).
> >> (probe2:sym0:0:2:0): ODD transfer in DATA IN
> phase.
> >> (probe2:sym0:0:2:0): COMMAND FAILED (87 0 10).
> > 
> > These appear to be the problem.  Since nothing has
> changed in sym(4) for a
> > long time, this has to be elsewhere, perhaps in
> dma system.
> 
> My guess is that the WD guys didn't set their
> additional inquiry
> length correctly and/or the length is correct, but
> they fail to
> issue an ignore wide residue for the last transfer. 
> The problem
> only shows up now because we properly calculate the
> extra inquiry
> length.  Perhaps we should do what Gerard suggested
> and round up
> to an even transfer size.
> 
> --
> Justin
> 
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-scsi" in the body of the
message

What would I see on a SCSI bus analyzer in terms of
"issue an ignore wide residue" message?  Maybe I'll
have to break out the SCSI spec. and the bus
analyzer...

Chuck McCrobie

__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message
[prev in list] [next in list] [prev in thread] [next in thread]