[prev in list] [next in list] [prev in thread] [next in thread]
List: freebsd-questions
Subject: Re: mpt(4) enabling write cache on raw disk
From: Darren Baginski <kickbsd () yandex ! com>
Date: 2012-07-30 15:18:44
Message-ID: 195811343661524 () web9h ! yandex ! ru
[Download RAW message or body]
29.07.2012, 17:00, "Stefan Johansson" <steve.johansson@telia.com>:
> Hello!
>
> I have a HP 3080X SAS/SATA 8 port mpt(4) controller card that I want to use in
> a ZFS setup.
> My problem is that the write cache is not enabled on disks that are not a part of a \
> RAID volume (RAID0 or RAID1). The write speed is limited to about 20MB/s with both \
> UFS and ZFS. If I create a RAID0 volume with mptutil(8) and then destroy it, write \
> cache gets enabled and the write speed reaches about 60MB/s with UFS and ZFS. \
> Unfortunately it won't survive a reboot.
> Has anyone else seen this problem with mpt(4) controllers and/or knows how to fix \
> it?
I have to create 8 raid0 volumes consisting of one drive, and then enable
#/usr/sbin/mptutil volume cache 0 enable
#/usr/sbin/mptutil volume cache 1 enable
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic