[prev in list] [next in list] [prev in thread] [next in thread] 

List:       freebsd-ppc
Subject:    Re: MPC8548 question
From:       Milan Obuch <freebsd-ppc () dino ! sk>
Date:       2014-07-06 16:22:53
Message-ID: 20140706182253.0af2647b () zeta ! dino ! sk
[Download RAW message or body]

This is a MIME-formatted message.  If you see this text it means that your
E-mail software does not support MIME-formatted messages.


On Sun, 06 Jul 2014 09:16:55 -0700
Nathan Whitehorn <nwhitehorn@freebsd.org> wrote:

> RB800 works great (MPC8544), although support for the CF slot is
> still missing (I need to add that). I didn't see an attachment, but
> looking at the kernel messages would be great. I think the most
> likely thing is some kind of interrupt routing failure, which should
> be pretty easy to fix. -Nathan
> 

Hmm, list ate attachment, retry...

I think that way too (interrupt lost or something like this), but no
idea how could I find what to fix.

Milan


RouterBOOT booter 2.20

RouterBoard 1000

CPU frequency: 1333 MHz
  Memory size: 512 MB

Press any key within 2 seconds to enter setup..
trying dhcp protocol... OK
resolved mac address 10:BF:48:7B:14:12
Gateway: 192.168.16.1
transfer started .................................................. transfer ok, \
time=2.95s setting up elf image... OK
jumping to kernel code


RouterBOOT booter 2.20

RouterBoard 1000

CPU frequency: 1333 MHz
  Memory size: 512 MB

Press any key within 2 seconds to enter setup..
trying dhcp protocol... OK
resolved mac address 10:BF:48:7B:14:12
Gateway: 192.168.16.1
transfer started .................................................. transfer ok, \
time=2.63s setting up elf image... OK
jumping to kernel code
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 r268286M: Sun Jul  6 08:33:34 CEST 2014
    root@zeta.dino.sk:/data/powerpc/obj/powerpc.powerpc/data/src/11/sys/MPC8548 \
powerpc gcc version 4.2.1 20070831 patched [FreeBSD]
WARNING: WITNESS option enabled, expect reduced performance.
cpu0: Freescale e500v2 core revision 2.0, 1333.32 MHz
cpu0: Features 84000000<PPC32,MMU>
cpu0: HID0 80804000<EMCP,DOZE,TBEN>
real memory  = 469745664 (447 MB)
avail memory = 458801152 (437 MB)
random device not loaded; using insecure entropy
random: <Software, Yarrow> initialized
ofwbus0: <Open Firmware Device Tree> on nexus0
simplebus0: <Flattened device tree simple bus> mem 0xe0000000-0xe00fffff on ofwbus0
uart0: <16550 or compatible> mem 0x4500-0x45ff irq 26 on simplebus0
uart0: console (115339,n,8,1)
openpic0: <OpenPIC Interrupt Controller> mem 0x40000-0x7ffff on simplebus0
tsec0: <Enhanced Three-Speed Ethernet Controller> mem 0x24000-0x24fff irq 13,14,18 on \
                simplebus0
miibus0: <MII bus> on tsec0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, \
                1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
tsec0: Ethernet address: 00:0c:42:43:62:0c
tsec1: <Enhanced Three-Speed Ethernet Controller> mem 0x25000-0x25fff irq 19,20,24 on \
                simplebus0
miibus1: <MII bus> on tsec1
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
rgephy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, \
                1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
tsec1: Ethernet address: 00:0c:42:43:62:0d
tsec2: <Enhanced Three-Speed Ethernet Controller> mem 0x26000-0x26fff irq 15,16,17 on \
                simplebus0
miibus2: <MII bus> on tsec2
rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 2 on miibus2
rgephy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, \
                1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
tsec2: Ethernet address: 00:0c:42:43:62:0e
tsec3: <Enhanced Three-Speed Ethernet Controller> mem 0x27000-0x27fff irq 21,22,23 on \
                simplebus0
miibus3: <MII bus> on tsec3
rgephy3: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 3 on miibus3
rgephy3:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, \
                1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
tsec3: Ethernet address: 00:0c:42:43:62:0f
cryptosoft0: <software crypto> on nexus0
Timecounter "timebase" frequency 66666000 Hz quality 0
Event timer "decrementer" frequency 66666000 Hz quality 1000
Timecounters tick every 1.000 msec
bootpc_init: wired to interface 'tsec0'
Sending DHCP Discover packet from interface tsec0 (00:0c:42:43:62:0c)
tsec0: link state changed to DOWN
tsec0: link state changed to UP
tsec0: watchdog timeout
tsec0: link state changed to DOWN
DHCP/BOOTP timeout for server 255.255.255.255
tsec0: link state changed to UP
DHCP/BOOTP timeout for server 255.255.255.255
random: unblocking device.
tsec0: watchdog timeout
tsec0: link state changed to DOWN
DHCP/BOOTP timeout for server 255.255.255.255
tsec0: link state changed to UP
DHCP/BOOTP timeout for server 255.255.255.255
tsec0: watchdog timeout
tsec0: link state changed to DOWN
DHCP/BOOTP timeout for server 255.255.255.255



_______________________________________________
freebsd-ppc@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@freebsd.org"

[prev in list] [next in list] [prev in thread] [next in thread]