[prev in list] [next in list] [prev in thread] [next in thread]
List: freebsd-newbies
Subject: Re: Install problems (DFE-530TX+, fd0, config> di fe0, and more.
From: Joe Warner <rootman () xmission ! com>
Date: 2001-04-30 11:23:16
[Download RAW message or body]
Keith,
FreeBSD-Newbies isn't for asking technical questions such as this.
I've forwarded this to FreeBSD-Questions. You should get better results from
them.
Thanks
Joe
On Mon, 30 Apr 2001, KP wrote:
> First, I want to thank the people that respond to my
> call for help. Thank you.
>
> Keith Proffitt
> keith_proffitt@yahoo.com
>
> --------
> My system is:
>
> OS = FreeBSD 4.2-RELEASE #0
>
> HD = 3052MB <SAMSUNG SV0322A> [11024/9/63]
>
> CPU = Pentium/P54C (199.43-MHz 586-class CPU)
>
> Memory = 64MB
>
> Videocard = Diamond’s Stealth III S540
>
> NIC = DLink DFE-530TX+ (I have read people saying rl
> is the driver for this.)
>
> CDROM = Mitsumi CRMC-FX820S
>
> Mouse = PS/2 (logitec wheel mouse)
>
> Soundcard = Opti soundcard.
>
> No SCSI or USB device
> ---------
>
> I am extremely new to any *NIX OS (brought up on MS).
> I need to know how to config the kernal to see
> (identify) the DLink DFE-530TX+ NIC and load the
> proper device driver (rl ???).
>
> My attempts have been to re-install the OS several
> times, modify the rc.conf file, and compile a
> cutomized kernel. All have failed and caused other
> problems.
>
> Below is the dmesg output, messages log, and kernel
> configuration file. Again, thanks for any help.
>
> -------------
> DMESG
> -------------
> Copyright (c) 1992-2000 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
> 1991, 1992, 1993, 1994
> The Regents of the University of California. All
> rights reserved.
> FreeBSD 4.2-RELEASE #0: Sun Apr 29 14:47:49 PDT 2001
> root@:/usr/src/sys/compile/YHVH
> Timecounter "i8254" frequency 1193182 Hz
> CPU: Pentium/P54C (199.43-MHz 586-class CPU)
> Origin = "GenuineIntel" Id = 0x52c Stepping = 12
> Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
> real memory = 67108864 (65536K bytes)
> config> di sn0
> config> di lnc0
> config> di ie0
> config> di fe0
> No such device: fe0
> Invalid command or syntax. Type `?' for help.
> config> di ed0
> No such device: ed0
> Invalid command or syntax. Type `?' for help.
> config> di cs0
> config> q
> avail memory = 62513152 (61048K bytes)
> Preloaded elf kernel "kernel" at 0xc02d9000.
> Preloaded userconfig_script "/boot/kernel.conf" at
> 0xc02d909c.
> Intel Pentium detected, installing workaround for F00F
> bug
> md0: Malloc disk
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Host to PCI bridge> on motherboard
> pci0: <PCI bus> on pcib0
> isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0
> on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel PIIX3 ATA controller> port
> 0xf000-0xf00f at device 7.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> pci0: <unknown card> (vendor=0x1186, dev=0x1300) at
> 17.0 irq 10
> pci0: <S3 ViRGE graphics accelerator> at 18.0 irq 11
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7
> irq 6 drq 2 on isa0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> atkbdc0: <Keyboard controller (i8042)> at port
> 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model MouseMan+, device ID 0
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
> 0xa0000-0xbffff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 8250
> sio1: configured irq 3 not in bitmap of probed irqs 0
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on
> isa0
> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> ad0: 3052MB <SAMSUNG SV0322A> [11024/9/63] at
> ata0-master WDMA2
> acd0: CDROM <FX820S> at ata0-slave using PIO3
> Mounting root from ufs:/dev/ad0s1a
> cd9660: RockRidge Extension
> fd0c: hard error reading fsbn 0 of 0-3 (No status)
> fd0c: hard error writing fsbn 7 of 7-9 (No status)
> fd0c: hard error writing fsbn 16 of 16-18 (No status)
> fd0c: hard error writing fsbn 19 (No status)
> fd0c: hard error writing fsbn 2127 (No status)
> fd0c: hard error writing fsbn 2127 (No status)
> fd0c: hard error writing fsbn 2127 (No status)
>
> -------------
> messages log
> -------------
> Apr 29 16:23:38 /kernel: Copyright (c) 1992-2000 The
> FreeBSD Project.
> Apr 29 16:23:38 /kernel: Copyright (c) 1979, 1980,
> 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> Apr 29 16:23:38 /kernel: The Regents of the
> University of California. All rights reserved.
> Apr 29 16:23:38 /kernel: FreeBSD 4.2-RELEASE #0: Sun
> Apr 29 14:47:49 PDT 2001
> Apr 29 16:23:38 /kernel:
> root@:/usr/src/sys/compile/YHVH
> Apr 29 16:23:38 /kernel: Timecounter "i8254"
> frequency 1193182 Hz
> Apr 29 16:23:38 /kernel: CPU: Pentium/P54C
> (199.43-MHz 586-class CPU)
> Apr 29 16:23:38 /kernel: Origin = "GenuineIntel" Id
> = 0x52c Stepping = 12
> Apr 29 16:23:38 /kernel:
> Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
> Apr 29 16:23:38 /kernel: real memory = 67108864
> (65536K bytes)
> Apr 29 16:23:38 /kernel: config> di sn0
> Apr 29 16:23:38 /kernel: config> di lnc0
> Apr 29 16:23:38 /kernel: config> di ie0
> Apr 29 16:23:38 /kernel: config> di fe0
> Apr 29 16:23:38 /kernel: No such device: fe0
> Apr 29 16:23:38 /kernel: Invalid command or syntax.
> Type `?' for help.
> Apr 29 16:23:38 /kernel: config> di ed0
> Apr 29 16:23:38 /kernel: No such device: ed0
> Apr 29 16:23:38 /kernel: Invalid command or syntax.
> Type `?' for help.
> Apr 29 16:23:38 /kernel: config> di cs0
> Apr 29 16:23:38 /kernel: config> q
> Apr 29 16:23:38 /kernel: avail memory = 62513152
> (61048K bytes)
> Apr 29 16:23:38 /kernel: Preloaded elf kernel
> "kernel" at 0xc02d9000.
> Apr 29 16:23:38 /kernel: Preloaded userconfig_script
> "/boot/kernel.conf" at 0xc02d909c.
> Apr 29 16:23:38 /kernel: Intel Pentium detected,
> installing workaround for F00F bug
> Apr 29 16:23:38 /kernel: md0: Malloc disk
> Apr 29 16:23:38 /kernel: npx0: <math processor> on
> motherboard
> Apr 29 16:23:38 /kernel: npx0: INT 16 interface
> Apr 29 16:23:38 /kernel: pcib0: <Host to PCI bridge>
> on motherboard
> Apr 29 16:23:38 /kernel: pci0: <PCI bus> on pcib0
> Apr 29 16:23:38 /kernel: isab0: <Intel 82371SB PCI to
> ISA bridge> at device 7.0 on pci0
> Apr 29 16:23:38 /kernel: isa0: <ISA bus> on isab0
> Apr 29 16:23:38 /kernel: atapci0: <Intel PIIX3 ATA
> controller> port 0xf000-0xf00f at device 7.1 on pci0
> Apr 29 16:23:38 /kernel: ata0: at 0x1f0 irq 14 on
> atapci0
> Apr 29 16:23:38 /kernel: pci0: <unknown card>
> (vendor=0x1186, dev=0x1300) at 17.0 irq 10
> Apr 29 16:23:38 /kernel: pci0: <S3 ViRGE graphics
> accelerator> at 18.0 irq 11
> Apr 29 16:23:38 /kernel: fdc0: <NEC 72065B or clone>
> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> Apr 29 16:23:38 /kernel: fdc0: FIFO enabled, 8 bytes
> threshold
> Apr 29 16:23:38 /kernel: fd0: <1440-KB 3.5" drive> on
> fdc0 drive 0
> Apr 29 16:23:38 /kernel: atkbdc0: <Keyboard
> controller (i8042)> at port 0x60,0x64 on isa0
> Apr 29 16:23:38 /kernel: atkbd0: <AT Keyboard> flags
> 0x1 irq 1 on atkbdc0
> Apr 29 16:23:38 /kernel: kbd0 at atkbd0
> Apr 29 16:23:38 /kernel: psm0: <PS/2 Mouse> irq 12 on
> atkbdc0
> Apr 29 16:23:38 /kernel: psm0: model MouseMan+,
> device ID 0
> Apr 29 16:23:38 /kernel: vga0: <Generic ISA VGA> at
> port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Apr 29 16:23:38 /kernel: sc0: <System console> at
> flags 0x100 on isa0
> Apr 29 16:23:38 /kernel: sc0: VGA <16 virtual
> consoles, flags=0x300>
> Apr 29 16:23:38 /kernel: sio0: configured irq 4 not
> in bitmap of probed irqs 0
> Apr 29 16:23:38 /kernel: sio0 at port 0x3f8-0x3ff irq
> 4 flags 0x10 on isa0
> Apr 29 16:23:38 /kernel: sio0: type 8250
> Apr 29 16:23:38 /kernel: sio1: configured irq 3 not
> in bitmap of probed irqs 0
> Apr 29 16:23:38 /kernel: ppc0: <Parallel port> at
> port 0x378-0x37f irq 7 on isa0
> Apr 29 16:23:38 /kernel: ppc0: Generic chipset
> (NIBBLE-only) in COMPATIBLE mode
> Apr 29 16:23:38 /kernel: plip0: <PLIP network
> interface> on ppbus0
> Apr 29 16:23:38 /kernel: lpt0: <Printer> on ppbus0
> Apr 29 16:23:38 /kernel: lpt0: Interrupt-driven port
> Apr 29 16:23:38 /kernel: ppi0: <Parallel I/O> on
> ppbus0
> Apr 29 16:23:38 /kernel: ad0: 3052MB <SAMSUNG
> SV0322A> [11024/9/63] at ata0-master WDMA2
> Apr 29 16:23:38 /kernel: acd0: CDROM <FX820S> at
> ata0-slave using PIO3
> Apr 29 16:23:38 /kernel: Mounting root from
> ufs:/dev/ad0s1a
> Apr 29 16:27:55 login: ROOT LOGIN (root) ON ttyv0
> Apr 29 19:55:34 reboot: rebooted by root
> Apr 29 19:55:35 syslogd: exiting on signal 15
> Apr 29 19:57:32 /kernel: Copyright (c) 1992-2000 The
> FreeBSD Project.
> Apr 29 19:57:32 /kernel: Copyright (c) 1979, 1980,
> 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> Apr 29 19:57:32 /kernel: The Regents of the
> University of California. All rights reserved.
> Apr 29 19:57:32 /kernel: FreeBSD 4.2-RELEASE #0: Sun
> Apr 29 14:47:49 PDT 2001
> Apr 29 19:57:32 /kernel:
> root@:/usr/src/sys/compile/YHVH
> Apr 29 19:57:32 /kernel: Timecounter "i8254"
> frequency 1193182 Hz
> Apr 29 19:57:32 /kernel: CPU: Pentium/P54C
> (199.43-MHz 586-class CPU)
> Apr 29 19:57:32 /kernel: Origin = "GenuineIntel" Id
> = 0x52c Stepping = 12
> Apr 29 19:57:32 /kernel:
> Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
> Apr 29 19:57:32 /kernel: real memory = 67108864
> (65536K bytes)
> Apr 29 19:57:32 /kernel: config> di sn0
> Apr 29 19:57:32 /kernel: config> di lnc0
> Apr 29 19:57:32 /kernel: config> di ie0
> Apr 29 19:57:32 /kernel: config> di fe0
> Apr 29 19:57:32 /kernel: No such device: fe0
> Apr 29 19:57:32 /kernel: Invalid command or syntax.
> Type `?' for help.
> Apr 29 19:57:32 /kernel: config> di ed0
> Apr 29 19:57:32 /kernel: No such device: ed0
> Apr 29 19:57:32 /kernel: Invalid command or syntax.
> Type `?' for help.
> Apr 29 19:57:32 /kernel: config> di cs0
> Apr 29 19:57:32 /kernel: config> q
> Apr 29 19:57:32 /kernel: avail memory = 62513152
> (61048K bytes)
> Apr 29 19:57:32 /kernel: Preloaded elf kernel
> "kernel" at 0xc02d9000.
> Apr 29 19:57:32 /kernel: Preloaded userconfig_script
> "/boot/kernel.conf" at 0xc02d909c.
> Apr 29 19:57:32 /kernel: Intel Pentium detected,
> installing workaround for F00F bug
> Apr 29 19:57:32 /kernel: md0: Malloc disk
> Apr 29 19:57:32 /kernel: npx0: <math processor> on
> motherboard
> Apr 29 19:57:32 /kernel: npx0: INT 16 interface
> Apr 29 19:57:32 /kernel: pcib0: <Host to PCI bridge>
> on motherboard
> Apr 29 19:57:32 /kernel: pci0: <PCI bus> on pcib0
> Apr 29 19:57:32 /kernel: isab0: <Intel 82371SB PCI to
> ISA bridge> at device 7.0 on pci0
> Apr 29 19:57:32 /kernel: isa0: <ISA bus> on isab0
> Apr 29 19:57:32 /kernel: atapci0: <Intel PIIX3 ATA
> controller> port 0xf000-0xf00f at device 7.1 on pci0
> Apr 29 19:57:32 /kernel: ata0: at 0x1f0 irq 14 on
> atapci0
> Apr 29 19:57:32 /kernel: pci0: <unknown card>
> (vendor=0x1186, dev=0x1300) at 17.0 irq 10
> Apr 29 19:57:32 /kernel: pci0: <S3 ViRGE graphics
> accelerator> at 18.0 irq 11
> Apr 29 19:57:32 /kernel: fdc0: <NEC 72065B or clone>
> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> Apr 29 19:57:32 /kernel: fdc0: FIFO enabled, 8 bytes
> threshold
> Apr 29 19:57:32 /kernel: fd0: <1440-KB 3.5" drive> on
> fdc0 drive 0
> Apr 29 19:57:32 /kernel: atkbdc0: <Keyboard
> controller (i8042)> at port 0x60,0x64 on isa0
> Apr 29 19:57:32 /kernel: atkbd0: <AT Keyboard> flags
> 0x1 irq 1 on atkbdc0
> Apr 29 19:57:32 /kernel: kbd0 at atkbd0
> Apr 29 19:57:32 /kernel: psm0: <PS/2 Mouse> irq 12 on
> atkbdc0
> Apr 29 19:57:32 /kernel: psm0: model MouseMan+,
> device ID 0
> Apr 29 19:57:32 /kernel: vga0: <Generic ISA VGA> at
> port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Apr 29 19:57:32 /kernel: sc0: <System console> at
> flags 0x100 on isa0
> Apr 29 19:57:32 /kernel: sc0: VGA <16 virtual
> consoles, flags=0x300>
> Apr 29 19:57:32 /kernel: sio0: configured irq 4 not
> in bitmap of probed irqs 0
> Apr 29 19:57:32 /kernel: sio0 at port 0x3f8-0x3ff irq
> 4 flags 0x10 on isa0
> Apr 29 19:57:32 /kernel: sio0: type 8250
> Apr 29 19:57:32 /kernel: sio1: configured irq 3 not
> in bitmap of probed irqs 0
> Apr 29 19:57:32 /kernel: ppc0: <Parallel port> at
> port 0x378-0x37f irq 7 on isa0
> Apr 29 19:57:32 /kernel: ppc0: Generic chipset
> (NIBBLE-only) in COMPATIBLE mode
> Apr 29 19:57:32 /kernel: plip0: <PLIP network
> interface> on ppbus0
> Apr 29 19:57:32 /kernel: lpt0: <Printer> on ppbus0
> Apr 29 19:57:32 /kernel: lpt0: Interrupt-driven port
> Apr 29 19:57:32 /kernel: ppi0: <Parallel I/O> on
> ppbus0
> Apr 29 19:57:32 /kernel: ad0: 3052MB <SAMSUNG
> SV0322A> [11024/9/63] at ata0-master WDMA2
> Apr 29 19:57:32 /kernel: acd0: CDROM <FX820S> at
> ata0-slave using PIO3
> Apr 29 19:57:32 /kernel: Mounting root from
> ufs:/dev/ad0s1a
> Apr 29 19:58:29 login: ROOT LOGIN (root) ON ttyv0
> Apr 29 20:25:45 /kernel: cd9660: RockRidge Extension
> Apr 29 21:28:02 /kernel: fd0c: hard error reading
> fsbn 0 of 0-3 (No status)
> Apr 29 21:39:30 /kernel: fd0c: hard error writing
> fsbn 7 of 7-9 (No status)
> Apr 29 21:39:32 /kernel: fd0c: hard error writing
> fsbn 16 of 16-18 (No status)
> Apr 29 21:39:34 /kernel: fd0c: hard error writing
> fsbn 19 (No status)
> Apr 29 21:39:37 /kernel: fd0c: hard error writing
> fsbn 2127 (No status)
> Apr 29 21:39:44 last message repeated 2 times
>
>
> -------------
> kernel configuration file
> -------------
> #
> # YHVH -- Customized kernel configuration file for
> this FreeBSD/i386 system
> #
> # For more information on this file, please read the
> handbook section on
> # Kernel Configuration Files:
> #
> #
> http://www.FreeBSD.org/handbook/kernelconfig-config.html
> #
> # The handbook is also available locally in
> /usr/share/doc/handbook
> # if you've installed the doc distribution, otherwise
> always see the
> # FreeBSD World Wide Web server
> (http://www.FreeBSD.org/) for the
> # latest information.
> #
> # An exhaustive list of options and more detailed
> explanations of the
> # device lines is also present in the ./LINT
> configuration file. If you are
> # in doubt as to the purpose or necessity of a line,
> check first in LINT.
> #
> # $FreeBSD: src/sys/i386/conf/YHVH,v 1.0 2001/04/29
> 23:16:07 n_hibma Exp $
>
> machine i386
> cpu I586_CPU
>
> ident YHVH
> maxusers 32
>
> #makeoptions DEBUG=-g #Build kernel with gdb(1) debug
> symbols
>
> options GPL_MATH_EMULATE #Support for x87 emulation
> options INET #InterNETworking
> options INET6 #IPv6 communications protocols
> options FFS #Berkeley Fast Filesystem
> options FFS_ROOT #FFS usable as root device [keep
> this!]
> options SOFTUPDATES #Enable FFS soft updates support
> options MFS #Memory Filesystem
> options MD_ROOT #MD is a potential root device
> #options NFS #Network Filesystem
> #options NFS_ROOT #NFS usable as root device, NFS
> required
> #options MSDOSFS #MSDOS Filesystem
> options CD9660 #ISO 9660 Filesystem
> options CD9660_ROOT #CD-ROM usable as root, CD9660
> required
> options PROCFS #Process filesystem
> options COMPAT_43 #Compatible with BSD 4.3 [KEEP
> THIS!]
> #options SCSI_DELAY=15000 #Delay (in ms) before
> probing SCSI
> options UCONSOLE #Allow users to grab the console
> options USERCONFIG #boot -c editor
> options VISUAL_USERCONFIG #visual boot -c editor
> options KTRACE #ktrace(1) support
> options SYSVSHM #SYSV-style shared memory
> options SYSVMSG #SYSV-style message queues
> options SYSVSEM #SYSV-style semaphores
> options P1003_1B #Posix P1003_1B real-time
> extensions
> options _KPOSIX_PRIORITY_SCHEDULING
> options ICMP_BANDLIM #Rate limit bad replies
> options KBD_INSTALL_CDEV # install a CDEV entry in
> /dev
>
> # To make an SMP kernel, the next two are needed
> #options SMP # Symmetric MultiProcessor Kernel
> #options APIC_IO # Symmetric (APIC) I/O
>
> device isa
> device eisa
> device pci
>
> # Floppy drives
> device fdc0 at isa? port IO_FD1 irq 6 drq 2
> device fd0 at fdc0 drive 0
> #device fd1 at fdc0 drive 1
>
> # ATA and ATAPI devices
> device ata0 at isa? port IO_WD1 irq 14
> device ata1 at isa? port IO_WD2 irq 15
> device ata
> device atadisk # ATA disk drives
> device atapicd # ATAPI CDROM drives
> device atapifd # ATAPI floppy drives
> #device atapist # ATAPI tape drives
> options ATA_STATIC_ID #Static device numbering
> #options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI
> devices
>
> # SCSI Controllers
> #device ahb # EISA AHA1742 family
> #device ahc # AHA2940 and onboard AIC7xxx devices
> #device amd # AMD 53C974 (Teckram DC-390(T))
> #device isp # Qlogic family
> #device ncr # NCR/Symbios Logic
> #device sym # NCR/Symbios Logic (newer chipsets)
> #options SYM_SETUP_LP_PROBE_MAP=0x40
> # Allow ncr to attach legacy NCR devices when
> # both sym and ncr are configured
>
> #device adv0 at isa?
> #device adw
> #device bt0 at isa?
> #device aha0 at isa?
> #device aic0 at isa?
>
> #device ncv # NCR 53C500
> #device nsp # Workbit Ninja SCSI-3
> #device stg # TMC 18C30/18C50
>
> # SCSI peripherals
> #device scbus # SCSI bus (required)
> #device da # Direct Access (disks)
> #device sa # Sequential Access (tape etc)
> #device cd # CD
> #device pass # Passthrough device (direct SCSI
> access)
>
> # RAID controllers interfaced to the SCSI subsystem
> #device asr # DPT SmartRAID V, VI and Adaptec SCSI
> RAID
> #device dpt # DPT Smartcache - See LINT for options!
> #device mly # Mylex AcceleRAID/eXtremeRAID
>
> # RAID controllers
> #device ida # Compaq Smart RAID
> #device amr # AMI MegaRAID
> #device mlx # Mylex DAC960 family
> #device twe # 3ware Escalade
>
> # atkbdc0 controls both the keyboard and the PS/2
> mouse
> device atkbdc0 at isa? port IO_KBD
> device atkbd0 at atkbdc? irq 1 flags 0x1
> device psm0 at atkbdc? irq 12
>
> device vga0 at isa?
>
> # splash screen/screen saver
> pseudo-device splash
>
> # syscons is the default console driver, resembling an
> SCO console
> device sc0 at isa? flags 0x100
>
> # Enable this and PCVT_FREEBSD for pcvt vt220
> compatible console driver
> #device vt0 at isa?
> #options XSERVER # support for X server on a vt
> console
> #options FAT_CURSOR # start with block cursor
> # If you have a ThinkPAD, uncomment this along with
> the rest of the PCVT lines
> #options PCVT_SCANSET=2 # IBM keyboards are non-std
>
> # Floating point support - do not disable.
> device npx0 at nexus? port IO_NPX irq 13
>
> # Power management support (see LINT for more options)
> device apm0 at nexus? disable flags 0x20 #
> Advanced Power Management
>
> # PCCARD (PCMCIA) support
> device card
> device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
> device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000
> disable
>
> # Serial (COM) ports
> device sio0 at isa? port IO_COM1 flags 0x10 irq 4
> device sio1 at isa? port IO_COM2 irq 3
> device sio2 at isa? disable port IO_COM3 irq 5
> device sio3 at isa? disable port IO_COM4 irq 9
>
> # Parallel port
> device ppc0 at isa? irq 7
> device ppbus # Parallel port bus (required)
> device lpt # Printer
> device plip # TCP/IP over parallel
> device ppi # Parallel port interface device
> #device vpo # Requires scbus and da
>
>
> # PCI Ethernet NICs.
> #device de # DEC/Intel DC21x4x (``Tulip'')
> #device fxp # Intel EtherExpress PRO/100B (82557,
> 82558)
> #device tx # SMC 9432TX (83c170 ``EPIC'')
> #device vx # 3Com 3c590, 3c595 (``Vortex'')
> #device wx # Intel Gigabit Ethernet Card
> (``Wiseman'')
>
> # PCI Ethernet NICs that use the common MII bus
> controller code.
> # NOTE: Be sure to keep the 'device miibus' line in
> order to use these NICs!
> device miibus # MII bus support
> #device dc # DEC/Intel 21143 and various workalikes
> #device pcn # AMD Am79C79x PCI 10/100 NICs
> device rl # RealTek 8129/8139
> #device sf # Adaptec AIC-6915 (``Starfire'')
> #device sis # Silicon Integrated Systems SiS 900/SiS
> 7016
> #device ste # Sundance ST201 (D-Link DFE-550TX)
> #device tl # Texas Instruments ThunderLAN
> device vr # VIA Rhine, Rhine II
> #device wb # Winbond W89C840F
> #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
>
> # ISA Ethernet NICs.
> #device ed0 at isa? port 0x280 irq 10 iomem 0xd8000
> #device ex
> #device ep
> #device fe0 at isa? port 0x300
> # WaveLAN/IEEE 802.11 wireless NICs. Note: the
> WaveLAN/IEEE really
> # exists only as a PCMCIA device, so there is no ISA
> attatement needed
> # and resources will always be dynamically assigned by
> the pccard code.
> #device wi
> # Aironet 4500/4800 802.11 wireless NICs. Note: the
> declaration below will
> # work for PCMCIA and PCI cards, as well as ISA cards
> set to ISA PnP
> # mode (the factory default). If you set the switches
> on your ISA
> # card for a manually chosen I/O address and IRQ, you
> must specify
> # those paremeters here.
> #device an
> # Xircom Ethernet
> #device xe
> # The probe order of these is presently determined by
> i386/isa/isa_compat.c.
> device ie0 at isa? port 0x300 irq 10 iomem 0xd0000
> #device le0 at isa? port 0x300 irq 5 iomem 0xd0000
> device lnc0 at isa? port 0x280 irq 10 drq 0
> device cs0 at isa? port 0x300
> device sn0 at isa? port 0x300 irq 10
>
> # Pseudo devices - the number indicates how many units
> to allocated.
> pseudo-device loop # Network loopback
> pseudo-device ether # Ethernet support
> pseudo-device sl 1 # Kernel SLIP
> pseudo-device ppp 1 # Kernel PPP
> pseudo-device tun # Packet tunnel.
> pseudo-device pty # Pseudo-ttys (telnet etc)
> pseudo-device md # Memory "disks"
> pseudo-device gif 4 # IPv6 and IPv4 tunneling
> pseudo-device faith 1 # IPv6-to-IPv4 relaying
> (translation)
>
> # The `bpf' pseudo-device enables the Berkeley Packet
> Filter.
> # Be aware of the administrative consequences of
> enabling this!
> pseudo-device bpf #Berkeley packet filter
>
> # USB support
> #device uhci # UHCI PCI->USB interface
> #device ohci # OHCI PCI->USB interface
> #device usb # USB Bus (required)
> #device ugen # Generic
> #device uhid # "Human Interface Devices"
> #device ukbd # Keyboard
> #device ulpt # Printer
> #device umass # Disks/Mass storage - Requires scbus
> and da
> #device ums # Mouse
> #device uscanner # Scanners
> # USB Ethernet, requires mii
> #device aue # ADMtek USB ethernet
> #device cue # CATC USB ethernet
> #device kue # Kawasaki LSI USB ethernet
>
> Keith Proffitt
> keith_proffitt@yahoo.com
>
>
>
>
>
>
>
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Auctions - buy the things you want at great prices
> http://auctions.yahoo.com/
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-newbies" in the body of the message
--
Joe Warner
Daemon News
Bringing BSD Together
Daemon News E-Zine http://www.daemonnews.org
Daily Daemon News http://daily.daemonnews.org/
Print Magazine http://magazine.daemonnews.org/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-newbies" in the body of the message
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic