[prev in list] [next in list] [prev in thread] [next in thread] 

List:       freebsd-net
Subject:    Re: [vge] VIA VT6130 only auto negotiating to 1000baseT after
From:       Leon Feng <rainofchaos () gmail ! com>
Date:       2009-04-14 6:18:23
Message-ID: df599da60904132318u6da0aec8q86601e4557e26a7 () mail ! gmail ! com
[Download RAW message or body]

2009/4/14 Pyun YongHyeon <pyunyh@gmail.com>:
> On Tue, Apr 14, 2009 at 11:55:55AM +0800, Leon Feng wrote:
>> Hi,
>>
>> I am running CURRENT r190987 on VIA EPIA board with VT6130 chip.
>> I found two problems:
>>
>> 1. After normal boot, vge only auto negotiate to 100baseTX. Then
>> # ifconfig vge1 down
>> # ifconfig vge1 up
>> And vge1 will auto negotiate to 1000baseT.
>>
>
> It's normal to see negotiated speed/duplex only after configuring
> network interface(At least you have to up the interface to get
> valid link). You have configured vge1 in rc.conf, right?
>
My fault, after add ifconfig_vge1="up", vge1 works great.

I see  "Link auto-negotiation speed 100M bps full duplex" in the
machine connected to it at reboot. Thought it were auto negotiated
by FreeBSD. In fact it comes from BIOS.

>> 2. After reboot the system, there is an error message:
>> " savecore: reboot after panic: mutex vge0 not owned at
>> /usr/src/sys/modules/vge/../../dev/vge/if_vge.c:2395"
>>
>
> Hmm, there is no such line number 2395 in if_vge.c. Please make
> sure you've updated to latest CURRENT. And if you can see the panic
> again show me full back-trace info.
>
After savecore -c , it is gone.

>> Do not know whether these two are related. Any one has an idea?
>>
>
> I think the former has nothing to do with the latter.
>
Both solved. Great thanks.
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org"
[prev in list] [next in list] [prev in thread] [next in thread]