[prev in list] [next in list] [prev in thread] [next in thread]
List: freebsd-multimedia
Subject: x11/nvidia-driver cannot obtain EDID under 8.0-BETA3/i386
From: Eugene Grosbein <eugen () kuzbass ! ru>
Date: 2009-08-28 13:50:30
Message-ID: 20090828135029.GA21544 () svzserv ! kemerovo ! su
[Download RAW message or body]
Hi!
Fresh install of 8.0-BETA2 upgraded to 8.0-BETA3 using source,
x.org installed from fresh ports tree. It cannot read EDID from
Samsung 959NF CRT monitor. The same time, it can read EDID under 7.2-STABLE
just fine. I've tried older nvidia-driver-180.60 (downgrading port)
and current port's version 185.18.29, no change.
(WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
(II) NVIDIA(0): NVIDIA GPU GeForce 7600 GS (G73) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 05.73.22.16.02
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 7600 GS at PCI:1:0:0:
(--) NVIDIA(0): CRT-1
(--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-1
(==) NVIDIA(0):
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0): will be used as the requested mode.
Please direct me there to dig.
Eugene Grosbein
_______________________________________________
freebsd-multimedia@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@freebsd.org"
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic