[prev in list] [next in list] [prev in thread] [next in thread]
List: freebsd-mips
Subject: Re: can not get mib from ar8316 on etherswitch
From: Mori Hiroki <yamori813 () yahoo ! co ! jp>
Date: 2020-04-03 23:24:40
Message-ID: 1913964975.170961.1585956280139.JavaMail.yahoo () mail ! yahoo ! co ! jp
[Download RAW message or body]
Hi
I think this change have no compatibility.
But Atheros switch code use 32Bit address
value at register access.
I make get mib script by mruby for AR8316 and RTL8366.
https://github.com/ZRouter/ZRouter/tree/yamori813_modify/profiles/estools/files/usr/local/bin
I use this script on bsnmp-ucd.
----- Original Message -----
> From: Mori Hiroki <yamori813@yahoo.co.jp>
> To: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org>
> Cc:
> Date: 2020/4/1, Wed 13:21
> Subject: can not get mib from ar8316 on etherswitch
>
> Hi
>
> I try to get mib from AR8316. But I can not get value.
>
> AR8316 mib start from 0x20000. This is over 16bit.
>
> But member is only 16Bit in sys/dev/etherswitch/etherswitch.h.
>
> struct etherswitch_reg {
> uint16_t reg;
> uint32_t val;
>
> };
>
> I think good that is change to uint32_t at reg.
>
> Do you think this ?
>
> Thanks
>
> Hiroki Mori
>
> _______________________________________________
> freebsd-mips@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-mips
> To unsubscribe, send any mail to
> "freebsd-mips-unsubscribe@freebsd.org"
>
_______________________________________________
freebsd-mips@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-mips
To unsubscribe, send any mail to "freebsd-mips-unsubscribe@freebsd.org"
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic