[prev in list] [next in list] [prev in thread] [next in thread] 

List:       freebsd-mips
Subject:    Re: BCM/mips still hang up
From:       Mori Hiroki <yamori813 () yahoo ! co ! jp>
Date:       2018-11-16 5:33:28
Message-ID: 966536.89694.qm () web103907 ! mail ! ssk ! yahoo ! co ! jp
[Download RAW message or body]

Sorry this is missing res...


----- Original Message -----
> From: Mori Hiroki <yamori813@yahoo.co.jp>
> To: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org>
> Cc: 
> Date: 2018/11/16, Fri 14:27
> Subject: Re: BCM/mips still hang up
> 
> Hi.
> 
> I port review now.
> 
> 
> 
> https://reviews.freebsd.org/D18001
> 
> 
> Regards
> 
> 
> Hiroki Mori
> 
> 
> ----- Original Message -----
> > From: Mori Hiroki <yamori813@yahoo.co.jp>
> > To: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org>
> > Cc: 
> > Date: 2018/11/14, Wed 07:36
> > Subject: Re: BCM/mips still hang up
> > 
> > Hi
> > 
> > 
> > BCM5357(bcma) can boot and login.
> > 
> > 
> > https://dmesgd.nycbug.org/index.cgi?do=view&id=4578
> > 
> > But this have no network interface...
> > 
> > Hiroki Moiri
> > 
> > 
> > 
> > ----- Original Message -----
> > > From: Mori Hiroki <yamori813@yahoo.co.jp>
> > > To: "freebsd-mips@freebsd.org" 
> <freebsd-mips@freebsd.org>
> > > Cc: 
> > > Date: 2018/11/14, Wed 07:01
> > > Subject: Re: BCM/mips still hang up
> > > 
> > > Hi.
> > > 
> > > I found may be same problem cns11xx(arm) before.
> > > 
> > > I think this problem cuase of uart and interrupt.
> > > 
> > > Old Rays code work on fine on BCM/mips. But same
> > > time that have same hang up problem. I doubt
> > > merge INTERNG in system.
> > > 
> > > Thanks
> > > 
> > > Hiroki Mori
> > > 
> > > ----- Original Message -----
> > > > From: Mori Hiroki <yamori813@yahoo.co.jp>
> > > > To: "freebsd-mips@freebsd.org" 
> > <freebsd-mips@freebsd.org>
> > > > Cc: 
> > > > Date: 2018/11/12, Mon 14:26
> > > > Subject: BCM/mips still hang up
> > > > 
> > > > Hi
> > > > 
> > > > I try to 12.0-BETA4 on BCM5351 & BCM5352. It sill hang up on 
> boot.
> > > > This log.
> > > > 
> > > > entry: mips_init()
> > > > Cache info:
> > > > picache_stride    = 4096
> > > > picache_loopcount = 4
> > > > pdcache_stride    = 4096
> > > > pdcache_loopcount = 2
> > > > max line size     = 16
> > > > cpu0: Broadcom processor v8.144
> > > > MMU: Standard TLB, 32 entries (1K 4K 16K 64K 256K 1M 16M 64M 
> 256M pg 
> > 
> > > sizes)
> > > > L1 i-cache: 2 ways of 512 sets, 16 bytes per line
> > > > L1 d-cache: 2 ways of 256 sets, 16 bytes per line
> > > > L2 cache: disabled
> > > > Config1=0x3ed94c82<EJTAG>
> > > > ---<<BOOT>>---
> > > > KDB: debugger backends: ddb
> > > > KDB: current backend: ddb
> > > > Copyright (c) 1992-2018 The FreeBSD Project.
> > > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 
> 1993, 
> > 1994
> > > > The Regents of the University of California. All rights reserved.
> > > > FreeBSD is a registered trademark of The FreeBSD Foundation.
> > > > FreeBSD 12.0-BETA4 e78279655eb(stable/12) Buffalo_WHR-HP-G54 mips
> > > > gcc version 4.2.1 20070831 patched [FreeBSD]
> > > > real memory  = 16109568 (15732K bytes)
> > > > avail memory = 11276288 (10MB)
> > > > arc4random: no preloaded entropy cache
> > > > random: entropy device external interface
> > > > nexus0: <MIPS32 root nexus>
> > > > bhnd_nvram0: <Broadcom> on nexus0
> > > > bhnd0: <BCM5352 SIBA bus> at mem 0x18000000-0x180fffff on 
> nexus0
> > > > bhnd_chipc0: <Broadcom ChipCommon I/O Controller, rev 14> 
> mem 
> > > > 
> > > 
> > 
> 0x18000000-0x18000dff,0x1fc00000-0x1fffffff,0x1c000000-0x1dffffff,0x1a000000-0x1bffffff,0x18000f00-0x18000fff,0x18000e00-0x18000eff \
>  
> > 
> > > 
> > > > irq 8 at core 0 on bhnd0
> > > > gpio0: <Broadcom ChipCommon GPIO> mem 0x18000000-0x18000dff 
> on 
> > > bhnd_chipc0
> > > > gpiobus0: <GPIO bus> on gpio0
> > > > cpupic0: <MIPS32 Interrupt Controller> on nexus0
> > > > bcm_mips0: <Broadcom BMIPS33 CPU, rev 6> mem 
> > > > 0x18002000-0x18002dff,0x18002f00-0x18002fff,0x18002e00-0x18002eff 
> irq 
> > 10 at 
> > > core 
> > > > 2 on bhnd0
> > > > bhnd_pwrctl0: <ChipCommon Power Control> on bhnd_chipc0
> > > > clock0: <Generic MIPS32 ticker> on nexus0
> > > > Timecounter "MIPS32" frequency 100000000 Hz quality 800
> > > > Event timer "MIPS32" frequency 100000000 Hz quality 800
> > > > gpioc0: <GPIO controller> on gpio0
> > > > uart0: <16750 or compatible> mem 0x18000300-0x180003ff irq 
> 13 on 
> > 
> > > > bhnd_chipc0
> > > > uart0: console (115200,n,8,1)
> > > > uart1: <16750 or compatible> mem 0x18000400-0x180004ff irq 
> 14 on 
> > 
> > > > bhnd_chipc0
> > > > cfi1: <Broadcom ChipCommon CFI> mem 
> > > > 0x1c000000-0x1dffffff,0x18000040-0x1800004b on bhnd_chipc0
> > > > cfid0 on cfi1
> > > > bhnd0: <Broadcom Fast Ethernet MAC, rev 9> mem 
> > > > 0x18001000-0x18001dff,0x18001f00-0x18001fff,0x18001e00-0x18001eff 
> irq 
> > 9 at 
> > > core 
> > > > 1 (no driver attached)
> > > > bhnd0: <Broadcom USB 1.1 Host Controller, rev 2> mem 
> > > > 0x18003000-0x18003dff,0x18003f00-0x18003fff,0x18003e00-0x18003eff 
> irq 
> > 11 at 
> > > core 
> > > > 3 (no driver attached)
> > > > bhnd0: <Broadcom MEMC SDRAM Controller, rev 1> mem 
> > > > 
> > > 
> > 
> 0x18004000-0x18004dff,0-0x7ffffff,0x10000000-0x17ffffff,0x80000000-0x9fffffff,0x18004f00-0x18004fff,0x18004e00-0x18004eff \
>  
> > 
> > > 
> > > > at core 4 (no driver attached)
> > > > bhnd0: <Broadcom 802.11 MAC/PHY/Radio, rev 9> mem 
> > > > 0x18005000-0x18005dff,0x18005f00-0x18005fff,0x18005e00-0x18005eff 
> irq 
> > 12 at 
> > > core 
> > > > 5 (no driver attached)
> > > > bhnd0: <Broadcom RoboSwitch, rev 2> mem 
> > > > 0x18006000-0x18006dff,0x18006f00-0x18006fff,0x18006e00-0x18006eff 
> at 
> > core 6 
> > > (no 
> > > > driver attached)
> > > > cfi0 at mem 0x1c000000-0x1dffffff on nexus0
> > > > nexus_alloc_resource: could not reserve resource for cfi0
> > > > device_attach: cfi0 attach returned 6
> > > > Timecounters tick every 10.000 msec
> > > > Trying to mount root from cd9660:/dev/map/rootfs.uzip []...
> > > > Warning: no time-of-day clock registered, system time will not be 
> set 
> > > accurately
> > > > kern.coredump: 
> > > > _______________________________________________
> > > > freebsd-mips@freebsd.org mailing list
> > > > https://lists.freebsd.org/mailman/listinfo/freebsd-mips
> > > > To unsubscribe, send any mail to 
> > > > "freebsd-mips-unsubscribe@freebsd.org"
> > > > 
> > > 
> > > _______________________________________________
> > > freebsd-mips@freebsd.org mailing list
> > > https://lists.freebsd.org/mailman/listinfo/freebsd-mips
> > > To unsubscribe, send any mail to 
> > > "freebsd-mips-unsubscribe@freebsd.org"
> > > 
> > _______________________________________________
> > freebsd-mips@freebsd.org mailing list
> > https://lists.freebsd.org/mailman/listinfo/freebsd-mips
> > To unsubscribe, send any mail to 
> > "freebsd-mips-unsubscribe@freebsd.org"
> > 
> _______________________________________________
> freebsd-mips@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-mips
> To unsubscribe, send any mail to 
> "freebsd-mips-unsubscribe@freebsd.org"
> 
_______________________________________________
freebsd-mips@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-mips
To unsubscribe, send any mail to "freebsd-mips-unsubscribe@freebsd.org"


[prev in list] [next in list] [prev in thread] [next in thread] 

Configure | About | News | Add a list | Sponsored by KoreLogic