[prev in list] [next in list] [prev in thread] [next in thread]
List: freebsd-isp
Subject: Re: Disable write caching
From: Jim Weeks <jim () siteplus ! net>
Date: 2000-09-24 18:32:58
[Download RAW message or body]
Thanks,
Your memory is certainly better than mine. You had it exactly right ;-)
--
Jim Weeks
On Sun, 24 Sep 2000, Andre Albsmeier wrote:
> On Mon, 18-Sep-2000 at 09:51:34 -0400, Jim Weeks wrote:
> > I have a Seagate Barracuda drive that is giving me a fit. There has been
> > some discussion on this list about disabling the write cache on these
> > drives. I remember that someone posted the procedure, but can't find it
> > in the archives.
> >
> > If anyone has that information I would appreciate a response.
>
> I am currently in the Dominican Republic with my laptop that
> doesn't have SCSI so I have to remember it from head...
>
> You have to edit a modepage to do this. It can be done with
>
> camcontrol modepage da0 -m 8 -P 3 -e
>
> For da0 you use your drive and for 8 the modepage number. Then
> you will get your editor launched and see an entry like:
>
> WCE: 1
>
> This means that write caching is enabled. Change it to 0 and
> quit. You can launch the camcontrol again to see if the drive
> remebered the new setting.
>
> I think 8 is the correct number...
>
> If you have an Adaptec Controller with the latest BIOS (2.57.2)
> you can also set the WCE flag there in the SCSI select utility...
>
> -Andre
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isp" in the body of the message
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic