[prev in list] [next in list] [prev in thread] [next in thread] 

List:       freebsd-isdn
Subject:    Re: ok - 62 Eur bought me back again into isdn under 5.0
From:       Gary Jennejohn <garyj () jennejohn ! org>
Date:       2003-04-16 18:52:57
[Download RAW message or body]


"Christoph P. Kukulies" writes:
> http://mozart.physik.rwth-aachen.de/~kuku/messages.gz
> 
> Watch all these timeouts. To me it doesn't tell much at the moment.
> But Hellmuth may know. Or Gary perhaps.
> 

Apr 16 18:19:43 monk kernel: i4b-L1 ifpi2_isacsx_exir_hdlr: EXIRQ Rx Frame Overf
low
Apr 16 18:19:43 monk kernel: i4b-L1 avma1pp2_intr: stat 49
Apr 16 18:19:43 monk kernel: i4b-L1 avma1pp2_intr: ISAC
Apr 16 18:19:43 monk kernel: i4b-L1 ifpi2_isacsx_irq: unit 0: ista = 0x01
Apr 16 18:19:43 monk kernel: i4b-L1 ifpi2_isacsx_irq: unit 0: istad = 0x80
Apr 16 18:19:43 monk kernel: i4b-L1 ifpi2_isacsx_irq: unit 0: Data Overrun error
Apr 16 18:19:43 monk kernel: i4b-L1 avma1pp2_intr: stat 48
Apr 16 18:19:45 monk kernel: i4b-L3 T303_timeout: SETUP not answered, cr = 14


The overflow looks like the culprit to me. This is most probably the
cause of the SETUP error which appears to lead to all the other problems.

This could be due to your having too much trace turned on, such that
all the kernel printf's are screwing up the timing.

I haven't used the Fritz 2 under -current yet (I've used a Fritz 1 OK)
because I can't find my card.

I know the Fritz 1 works. Want to swap? Then I could debug the Fritz 2
driver.

---
Gary Jennejohn / garyj@jennejohn.org gj@freebsd.org gj@denx.de

_______________________________________________
freebsd-isdn@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-isdn
To unsubscribe, send any mail to "freebsd-isdn-unsubscribe@freebsd.org"
[prev in list] [next in list] [prev in thread] [next in thread]