[prev in list] [next in list] [prev in thread] [next in thread]
List: freebsd-hardware
Subject: promise tx2 unable to rebuild RAID1
From: ghtest <ghtest () oeaw ! ac ! at>
Date: 2006-02-13 16:13:04
Message-ID: 200602131713.04435.ghtest () oeaw ! ac ! at
[Download RAW message or body]
System: 6.0-RELEASE-p4
PCI-Controler: Promise Ultra 133 TX2
HDD's: Samsung Spinpoint ATA133 160 GB
RAID1 is degraded, i've got the following boot messages:
/var/log/messages:Feb 13 16:03:12 xxxxx kernel: ar0: 152587MB <Promise Fasttrak RAID1> status: DEGRADED
/var/log/messages:Feb 13 16:03:12 xxxxx kernel: ar0: disk0 DOWN no device found for this subdisk
/var/log/messages:Feb 13 16:03:12 xxxxx kernel: ar0: disk1 READY (mirror) using ad4 at ata2-master
after adding the spare:
/var/log/messages:Feb 13 16:03:54 xxxxx kernel: ad6: inserted into ar0 disk0 as spare
and the result of:
atacontrol status ar0
ar0: ATA RAID1 subdisks: ad6 ad4 status: DEGRADED
then i tried:
atacontrol rebuild ar0
and the result of:
atacontrol status ar0
ar0: ATA RAID1 subdisks: ad6 ad4 status: REBUILDING 0% completed
but nothing happens, this messages remains for day's
dd task (/bin/dd if=/dev/ar0 of=/dev/null bs=1m) runs
thanx for any advice
_______________________________________________
freebsd-hardware@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to "freebsd-hardware-unsubscribe@freebsd.org"
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic