[prev in list] [next in list] [prev in thread] [next in thread]
List: freebsd-hardware
Subject: Re: Problem with Marvell 88E8053 Yukon PCI-E Gigabit
From: suporte () wahtec ! com ! br
Date: 2005-10-28 18:09:42
Message-ID: 200510281809.42345.suporte () wahtec ! com ! br
[Download RAW message or body]
Download the driver from www.marvell.com
It's a package that you install with pkg_add and it copies a LKM (if_myk.ko)
to /boot/kernel. After that, you just need to load it.
It works fine for me (5.4).
cheers,
--aristeu
Em Éder de Mattos escreveu:
> I have a problem with Marvel 88E8053 Yukon PCI-E Gigabit on FreeBSD.
> It isn't recognized for sk module e doesn't work on 5.4 or 6.0
> the pciconf -vl command results:
> #########################################################################
> none2@pci3:0:0: class=0x020000 card=0x058c1462 chip=0x436211ab rev=0x15
> hdr=0x00 vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
> device = '88E8053 Yukon PCI-E Gigabit Ethernet Controller (copper)' class
> = network
> subclass = ethernet
> #########################################################################
> This "nic" is onboard on a MSI k8n neo4(the nvidia nForce4 Ethernet
> Controller) work only on 6.0, but not on 5.4
> Can somebody help me?
>
> Éder
> _______________________________________________
> freebsd-hardware@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
> To unsubscribe, send any mail to "freebsd-hardware-unsubscribe@freebsd.org"
_______________________________________________
freebsd-hardware@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to "freebsd-hardware-unsubscribe@freebsd.org"
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic