[prev in list] [next in list] [prev in thread] [next in thread] 

List:       freebsd-hackers
Subject:    Re: 4.0 and compaq smart array
From:       "Dmitry Volkov" <vdv () demos ! su>
Date:       2000-02-29 8:46:25
[Download RAW message or body]

You should use wd0* instead of ida0* or id0* in /etc/fstab.
Also you should said ./MAKEDEV ida0 id0 wd0 in /dev  
___
vdv

> Hi!
> I'm trying to install 4.0-curr on compaq (proliant 6500) with
> only 1 disk controller - Smart Array 3200. But I found that
> kernel from kern.flp does not have drivers for this controller.
> So, on another 4.0 machine I built kernel (took GENERIC, added
> 	device          ida
> 	device          id
> configured and compiled it), gzipped it and put on kern.flp
> instead of original kernel.gz. Then, I mounted mfsroot on /mnt,
> "cd" to /mnt/dev and said "./MAKEDEV ida0", and put new mfsroot
> on mfsroot.flp. Then I booted from those disks and installed
> FreeBSD. (It found disk ida0). After installation I put modified
> GENERIC kernel on /mnt and rebooted. Here is the log of boot:
> (some kernel checks skipped)
> 
> ====================
> FreeBSD 4.0-20000224-CURRENT #0: Fri Feb 25 19:20:37 MSK 2000
> dima@smena2.rt.ru:/usr/src/sys/compile/GENERIC
> ...
> ida0: <Compaq Smart Array 3200 controller> port 0x4000-0x40ff mem \
>                 0xc6ff0000-0xc6ff00ff irq 11 at device 0.0 on pci5
> ida0: drives=1 firm_rev=4.16
> id0: <Compaq Logical Drive> on ida0
> id0: 69459MB (142253280 sectors), blocksize=512
> ...
> ata0-slave: identify retries exceeded
> acd0: CDROM <COMPAQ CDR-8435> at ata0-master using PIO4
> Waiting 15 seconds for SCSI devices to settle
> Mounting root from ufs:/dev/ida0s1a
> no such device 'ida'
> setrootbyname failed
> ffs_mountroot: can't find rootvp
> Root mount failed: 6
> Mounting root from ufs:id0s1a
> swapon: adding /dev/ida0s1b as swap device
> Automatic reboot in progress...
> /dev/ida0s1a: FILESYSTEM CLEAN; SKIPPING CHECKS
> /dev/ida0s1a: clean, 39674 free (570 frags, 4888 blocks, 0.9% fragmentation)
> /dev/ida0s1e: FILESYSTEM CLEAN; SKIPPING CHECKS
> /dev/ida0s1e: clean, 2533812 free (23132 frags, 313835 blocks, 0.8% fragmentation)
> /dev/ida0s1f: FILESYSTEM CLEAN; SKIPPING CHECKS
> /dev/ida0s1f: clean, 9886 free (14 frags, 1234 blocks, 0.1% fragmentation)
> /dev/ida0s1g: FILESYSTEM CLEAN; SKIPPING CHECKS
> /dev/ida0s1g: clean, 20325785 free (281 frags, 2540688 blocks, 0.0% fragmentation)
> /dev/ida0s1h: FILESYSTEM CLEAN; SKIPPING CHECKS
> /dev/ida0s1h: clean, 44544505 free (9 frags, 5568062 blocks, 0.0% fragmentation)
> mount: /dev/ida0s1a on /: specified device does not match mounted device
> Mounting /etc/fstab filesystems failed, startup aborted
> Enter full pathname of shell or RETURN for /bin/sh: 
> ==================
> 
> What did I do wrong and how can I install (if can) FreeBSD
> on my machine?
> 
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-hackers" in the body of the message
> 
> 



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message


[prev in list] [next in list] [prev in thread] [next in thread]