[prev in list] [next in list] [prev in thread] [next in thread]
List: freebsd-hackers
Subject: Re: Problem with FastTrak S150 SX4-M
From: Søren_Schmidt <sos () DeepCore ! dk>
Date: 2005-01-28 8:00:30
Message-ID: 41F9F11E.2030006 () DeepCore ! dk
[Download RAW message or body]
Dave Myron wrote:
> It's not red but it is the PRI_RAID IDE connector. I have the controller set
> to IDE in the BIOS so it should act just as any other IDE controller
> (according to the manual and many other sources).
>
> I have two hard drives on the primary IDE (not on the controller) and a CD
> drive on the secondary IDE (also not on the controller). Then I have two
> more hard drives on the PRI_RAID channel (which *is* the P-ATA channel on
> the controller). Those two drives are getting the failure (or at least one
> is - see the error messages in my original text).
>
> I wish I had an S-ATA drive to test with so that I could verify that it's a
> problem with the P-ATA part of this controller.
Thats a known problem, its partly fixed in -current, the real fix is in
the works. Try to take /sys/dev/ata from a fresh -current and let me
know if that helps you.
--
-Søren
_______________________________________________
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to "freebsd-hackers-unsubscribe@freebsd.org"
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic