[prev in list] [next in list] [prev in thread] [next in thread]
List: freebsd-current
Subject: -current reliably panics during make release (current process = dd)
From: "Niels Chr. Bank-Pedersen" <ncbp () bank-pedersen ! dk>
Date: 2001-03-29 18:41:08
[Download RAW message or body]
On a -current from this morning, I can reliably trigger a panic by
"make release" (I believe the problem has existed for some time,
though).
The box can do make worlds without problem, but during make release,
it stumples at the same place every time.
This is a Dual P3 with all involved filesystems (/usr/src, /usr/obj
and the chrootdir) nullfs-mounted from a SU vinum raid01 volume.
monster# mount
/dev/da0s1a on / (ufs, local, noatime, soft-updates)
devfs on /dev (devfs, local)
/dev/da3s1e on /usr (ufs, local, noatime, soft-updates)
/dev/da0s1f on /var (ufs, local, noatime, soft-updates)
procfs on /proc (procfs, local)
/dev/vinum/vol/raid01 on /raid01 (ufs, NFS exported, local, noatime, soft-updates)
/raid01/usr/src on /usr/src (nullfs, local, noatime)
/raid01/usr/obj on /usr/obj (nullfs, local, noatime)
/raid01/usr/ports on /usr/ports (nullfs, local, noatime)
monster#
The panic:
Fatal trap 12: page fault while in kernel mode
cpuid = 1; lapic.id = 00000000
fault virtual address = 0x58
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc016749e
stack pointer = 0x10:0xe009ddf4
frame pointer = 0x10:0xe009ddf4
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 88329 (dd)
kernel: type 12 trap, code=0
CPU1 stopping CPUs: 0x00000001... stopped.
Stopped at devsw+0x6: cmpl $0,0x58(%eax)
db> trace
devsw(0,c41c3280,0,4,e0b8a36c) at devsw+0x6
vn_ioctl(c41c3280,4004667a,e009ded0,dfb3d740,dfb3d740) at
vn_ioctl+0xb5
ioctl(dfb3d740,e009df80,805b5c0,bfbff868,bfbff880) at ioctl+0x20a
syscall(2f,2f,2f,bfbff880,bfbff868) at syscall+0x405
syscall_with_err_pushed() at syscall_with_err_pushed+0x1b
db>
I'll try to get a crashdump - 1GB (if anyone's interested?).
Config attached.
/Niels Chr.
--
Niels Christian Bank-Pedersen, NCB1-RIPE.
Network Manager, Tele Danmark NET, IP-section.
"Hey, are any of you guys out there actually *using* RFC 2549?"
machine i386
cpu I686_CPU
ident MONSTER
maxusers 128
hints "/boot/device.hints"
#makeoptions DEBUG=-g
options INET
options FFS
options SOFTUPDATES
options NFS
options CD9660
options DEVFS
options PROCFS
options COMPAT_43
options SCSI_DELAY=5000
options UCONSOLE
options USERCONFIG
options VISUAL_USERCONFIG
options KTRACE
options SYSVSHM
options SYSVMSG
options SYSVSEM
options P1003_1B
options _KPOSIX_PRIORITY_SCHEDULING
options KBD_INSTALL_CDEV
options SMP
options APIC_IO
options DDB
device isa
device pci
device fdc
device ata
#device atadisk
device atapicd
#device atapifd
#device atapist
#options ATA_STATIC_ID
device sym
device scbus
device da
#device sa
#device cd
device pass
device atkbdc 1
device atkbd
device psm
device vga
device splash
device sc 1
device npx
device sio
device ppc
device ppbus
device lpt
device miibus
device fxp
device md
device random
device loop
device ether
device pty
device bpf
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic