[prev in list] [next in list] [prev in thread] [next in thread]
List: freebsd-current
Subject: Re: Updated ec-burst.diff patch
From: "Kevin Oberman" <oberman () es ! net>
Date: 2003-07-03 21:49:22
[Download RAW message or body]
This is a multipart MIME message.
> Date: Tue, 1 Jul 2003 01:07:53 -0700 (PDT)
> From: Nate Lawson <nate@root.org>
> Sender: owner-freebsd-current@freebsd.org
>
> Please download and try the new version. It correctly implements burst
> mode to the best of the 2.0 spec. Like the previous message, please
> report the appropriate dmesgs ("acpi_ec0*" and "EC Waited*") and any
> errors or regression. I've tested "du -a /" while plugging/unplugging the
> power cable on my laptop many times with no errors.
>
> I haven't received any feedback yet. This WILL hit the tree in a few
> weeks because it fixes known problems. Test it now or test it then. :)
I don't know if you want/need more data, but I am attaching the
output from my T30. I am including the results both before and after
the patch. The errors are about the same for each although the patched
version printed additional information.
One side note is that I get the errors for BAT0, BAT1, LID._PSW and
SLPB._PSW and these are all things that behave "imperfectly" with
ACPI.
The battery is not too back, but with the gnome Battery Charge Monitor
V2.2.2 (which claims to support ACPI), the battery charge seems to
cycle from the total of both batteries to just the primary to no
battery to both, etc. Very wird. The gkrellm battery display (which
probably uses the apm interface) seems to work fine as does the output
of the apm(8) command. I have not tried repeatedly issuing sysctls to
display the hw.acpi.battery values to see if they are unstable.
The lid and sleep switch both get initially set to S1 which is pretty
useless and not available on the T30. This may explain why it gets
errors (or not).
In the log with the patch I put the unit to sleep (acpiconf -s 3) and
the behavior is the same as always...prtty much works, but spins down
the disk too fast and does not turn off the backlight on the
display. On waking, it fails to re-init the USBs.
If I could get sleep to work, I could switch to ACPI.
Do the machdep.apm_*_delay sysctls do anything when ACPI is running or
is there any other mechanism to delay transition to S3?
--
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: oberman@es.net Phone: +1 510 486-8634
["acpi.log" (text/plain)]
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-BETA #9: Thu May 29 11:11:13 PDT 2003
root@puppeteer.es.net:/usr/obj/usr/src/sys/IBM-T30-D
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0531000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc0531294.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05312e4.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1798485476 Hz
CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.80GHz (1798.49-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 536281088 (511 MB)
avail memory = 515153920 (491 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM TP-1I > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 14 entries at 0xc00fdeb0
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.FDC_._INI] (Node \
0xc405e400), AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed \
[\\_SB_.PCI0.LPC_.EC__._INI] (Node 0xc4057880), AE_NOT_EXIST ACPI-1287: *** Error: \
Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc405b0e0), \
AE_NOT_EXIST ACPI-0175: *** Error: Method execution failed \
[\\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc405b0e0), AE_NOT_EXIST ACPI-1287: *** \
Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc405aec0), \
AE_NOT_EXIST ACPI-0175: *** Error: Method execution failed \
[\\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc405aec0), AE_NOT_EXIST
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT0._STA] \
(Node 0xc405b0e0), AE_NOT_EXIST ACPI-0175: *** Error: Method execution failed \
[\\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc405b0e0), AE_NOT_EXIST ACPI-1287: *** \
Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc405aec0), \
AE_NOT_EXIST ACPI-0175: *** Error: Method execution failed \
[\\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc405aec0), AE_NOT_EXIST
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_tz0: <thermal zone> port 0x530-0x537 on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
ACPI-1287: *** Error: Method execution failed [\\_SB_.LID_._PSW] (Node \
0xc151b3c0), AE_NOT_EXIST
acpi_button0: <Sleep Button> on acpi0
ACPI-1287: *** Error: Method execution failed [\\_SB_.SLPB._PSW] (Node \
0xc151b340), AE_NOT_EXIST
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on \
pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 11 at \
device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 11 at \
device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f irq 11 at \
device 29.2 on pci0
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
cbb0: <TI1520 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 0.0 on \
pci2 start (50000000) < sc->membase (d0200000)
start (50000000) < sc->pmembase (f0000000)
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1520 PCI-CardBus Bridge> mem 0x51000000-0x51000fff irq 11 at device 0.1 on \
pci2 start (51000000) < sc->membase (d0200000)
start (51000000) < sc->pmembase (f0000000)
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci2: <network> at device 2.0 (no driver attached)
fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x8000-0x803f mem \
0xd0200000-0xd0200fff irq 11 at device 8.0 on pci2
fxp0: Ethernet address 00:09:6b:50:36:29
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port \
0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at \
device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ichsmb0: <Intel 82801CA (ICH3) SMBus controller> port 0x1880-0x189f irq 11 at device \
31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
pcm0: <Intel 82801CA (ICH3)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 11 at device 31.5 \
on pci0
pcm0: <Analog Devices AD1881A AC97 Codec>
pci0: <simple comms> at device 31.6 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> flags 0x2000 irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 \
irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
orm0: <Option ROMs> at iomem \
0xe0000-0xeffff,0xdc000-0xdffff,0xd1000-0xd1fff,0xd0000-0xd0fff,0xc0000-0xcffff on \
isa0 pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: 38154MB <TOSHIBA MK4019GAX> [77520/16/63] at ata0-master UDMA100
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.AC__._PSR] \
(Node 0xc405adc0), AE_ERROR ACPI-0432: *** Error: Handler for [EmbeddedControl] \
returned AE_ERROR ACPI-1287: *** Error: Method execution failed \
[\\_SB_.PCI0.LPC_.EC__.BAT0._BST] (Node 0xc405b0a0), AE_ERROR ACPI-0432: *** Error: \
Handler for [EmbeddedControl] returned AE_ERROR ACPI-1287: *** Error: Method \
execution failed [\\_SB_.PCI0.LPC_.EC__.BAT0._BIF] (Node 0xc405b0c0), AE_ERROR \
Mounting root from ufs:/dev/ad0s3a
["ec-burst.log" (text/plain)]
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #19: Wed Jul 2 11:41:18 PDT 2003
root@puppeteer.es.net:/usr/obj/usr/src/sys/IBM-T30-D
Preloaded elf kernel "/boot/kernel/kernel" at 0xc053c000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc053c26c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc053c2bc.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1798481096 Hz
CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.80GHz (1798.48-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 536281088 (511 MB)
avail memory = 515108864 (491 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM TP-1I > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 14 entries at 0xc00fdeb0
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.FDC_._INI] (Node \
0xc405d3c0), AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed \
[\\_SB_.PCI0.LPC_.EC__._INI] (Node 0xc4056840), AE_NOT_EXIST ACPI-1287: *** Error: \
Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc405a0a0), \
AE_NOT_EXIST ACPI-0175: *** Error: Method execution failed \
[\\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc405a0a0), AE_NOT_EXIST ACPI-1287: *** \
Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc4059e80), \
AE_NOT_EXIST ACPI-0175: *** Error: Method execution failed \
[\\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc4059e80), AE_NOT_EXIST
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT0._STA] \
(Node 0xc405a0a0), AE_NOT_EXIST ACPI-0175: *** Error: Method execution failed \
[\\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc405a0a0), AE_NOT_EXIST ACPI-1287: *** \
Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc4059e80), \
AE_NOT_EXIST ACPI-0175: *** Error: Method execution failed \
[\\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc4059e80), AE_NOT_EXIST
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_tz0: <thermal zone> port 0x530-0x537 on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
ACPI-1287: *** Error: Method execution failed [\\_SB_.LID_._PSW] (Node \
0xc151b380), AE_NOT_EXIST
acpi_button0: <Sleep Button> on acpi0
ACPI-1287: *** Error: Method execution failed [\\_SB_.SLPB._PSW] (Node \
0xc151b300), AE_NOT_EXIST
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 29 INTA is routed to irq 11
pcib0: slot 29 INTB is routed to irq 11
pcib0: slot 29 INTC is routed to irq 11
pcib0: slot 31 INTB is routed to irq 11
pcib0: slot 31 INTB is routed to irq 11
pcib0: slot 31 INTB is routed to irq 11
agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on \
pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 11 at \
device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 11 at \
device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f irq 11 at \
device 29.2 on pci0
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib2: slot 0 INTA is routed to irq 11
pcib2: slot 0 INTB is routed to irq 11
pcib2: slot 2 INTA is routed to irq 11
pcib2: slot 8 INTA is routed to irq 11
cbb0: <TI1520 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 0.0 on \
pci2 start (50000000) < sc->membase (d0200000)
start (50000000) < sc->pmembase (f0000000)
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1520 PCI-CardBus Bridge> mem 0x51000000-0x51000fff irq 11 at device 0.1 on \
pci2 start (51000000) < sc->membase (d0200000)
start (51000000) < sc->pmembase (f0000000)
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci2: <network> at device 2.0 (no driver attached)
fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x8000-0x803f mem \
0xd0200000-0xd0200fff irq 11 at device 8.0 on pci2
fxp0: Ethernet address 00:09:6b:50:36:29
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port \
0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at \
device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ichsmb0: <Intel 82801CA (ICH3) SMBus controller> port 0x1880-0x189f irq 11 at device \
31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
pcm0: <Intel 82801CA (ICH3)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 11 at device 31.5 \
on pci0
pcm0: <Analog Devices AD1881A AC97 Codec>
pci0: <simple comms> at device 31.6 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> flags 0x2000 irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 \
irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
EC Waited max 13 cycles, event occurred
EC Waited max 18 cycles, event occurred
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
orm0: <Option ROMs> at iomem \
0xe0000-0xeffff,0xdc000-0xdffff,0xd1000-0xd1fff,0xd0000-0xd0fff,0xc0000-0xcffff on \
isa0 pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_cmbat0: battery initialization start
EC Waited max 22 cycles, event occurred
EC Waited max 33 cycles, event occurred
EC Waited max 34 cycles, event occurred
acpi_cmbat0: battery initialization done, tried 1 times
acpi_cmbat1: battery initialization start
EC Waited max 43 cycles, event occurred
acpi_cmbat1: battery initialization done, tried 1 times
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ad0: 38154MB <IC25N040ATCS04-0> [77520/16/63] at ata0-master UDMA100
Mounting root from ufs:/dev/ad0s3a
======== acpi_printcpu() debug dump ========
gdt[0077:c045c920] idt[0407:c045ccc0] ldt[0028] tr[0020] efl[00000086]
eax[00048000] ebx[c152ac80] ecx[00000000] edx[bfc00120]
esi[00000000] edi[c15399b0] ebp[dcd6bab0] esp[dcd6ba7c]
cr0[8005003b] cr2[280b542c] cr3[172e6000] cr4[00000611]
cs[0008] ds[0010] es[0010] fs[0018] gs[002f] ss[0010]
======== acpi_printcpu() debug dump ========
gdt[0077:c045c920] idt[0407:c045ccc0] ldt[0028] tr[0020] efl[00000002]
eax[00000001] ebx[c152ac80] ecx[00008000] edx[c1505720]
esi[00000000] edi[c15399b0] ebp[dcd6bab0] esp[dcd6ba7c]
cr0[8005003b] cr2[280b542c] cr3[172e6000] cr4[00000611]
cs[0008] ds[0010] es[0010] fs[0018] gs[002f] ss[0010]
usb0: cannot start
usb1: cannot start
usb2: cannot start
wakeup from sleeping state (slept 00:00:38)
ata0: resetting devices ..
usb0: host system error
usb0: host controller process error
usb0: host controller halted
usb1: host system error
usb1: host controller process error
usb1: host controller halted
usb2: host system error
usb2: host controller process error
usb2: host controller halted
done
ata1: resetting devices ..
done
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
acpi_cmbat1: battery initialization start
acpi_cmbat1: battery initialization done, tried 1 times
EC Waited max 45 cycles, event occurred
EC Waited max 51 cycles, event occurred
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic