[prev in list] [next in list] [prev in thread] [next in thread]
List: freebsd-bugs
Subject: adaptec 2920 pci not recognized with 4.2 release
From: "William Reid" <williamr () iceinc ! com>
Date: 2000-12-29 8:18:07
[Download RAW message or body]
Hi,
I've recently installed a FBSD box with 4.2...
The box serves as a pppoe/nat box.
I would also like to use the system to burn cd's, rip audio etc etc.
Everything works fine, but I have an adaptec 2920 (around 2.5 years old) card, and \
Freebsd refuses to see it..
I've Recompiled with all the scsi options set, here is what looks like the card from \
startup...
pci0: <unknown card> (vendor=0x1036, dev=0x0000) at 17.0 irq 10
My Soundblaster, which I just installed, appears to be using the same irq, but even \
before installing it, I had this same results.
sbc0: <Creative SB16/SB32> at port 0x220-0x22f,0x300-0x301,0x388-0x38b irq 10 drq 0,5 \
on isa0
Here is a copy of my output from dmesg for reference...
aftica# dmesg
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #0: Fri Dec 22 06:17:39 EST 2000
root@aftica.warzone:/usr/src/sys/compile/AFTICA
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 99474055 Hz
CPU: Pentium/P54C (99.47-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping = 12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 100663296 (98304K bytes)
avail memory = 93990912 (91788K bytes)
Preloaded elf kernel "kernel" at 0xc03e3000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371FB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX ATA controller> port 0x3000-0x300f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
pci0: <unknown card> (vendor=0x1036, dev=0x0000) at 17.0 irq 10
pci0: <S3 ViRGE DX/GX graphics accelerator> at 18.0 irq 11
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ep0: <3Com 3C509-TPO EtherLink III> at port 0x310-0x31f irq 9 on isa0
ep0: Ethernet address 00:60:97:6b:e8:f4
ep1: <3Com 3C509-TPO EtherLink III> at port 0x210-0x21f irq 5 on isa0
ep1: Ethernet address 00:60:97:6b:e9:7c
sbc0: <Creative SB16/SB32> at port 0x220-0x22f,0x300-0x301,0x388-0x38b irq 10 drq 0,5 \
on isa0
pcm0: <SB DSP 4.13> on sbc0
IP Filter: v3.4.8 initialized. Default = pass all, Logging = enabled
ad0: 1628MB <QUANTUM FIREBALL_TM1700A> [3309/16/63] at ata0-master WDMA2
Mounting root from ufs:/dev/ad0s1a
module_register: module netgraph already exists!
linker_file_sysinit "netgraph.ko" failed to register! 17
aftica#
Any ideas?
thanks
[Attachment #3 (text/html)]
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 5.50.4611.1300" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>
<DIV><FONT face=Arial size=2>Hi,</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I've recently installed a FBSD box with
4.2...</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>The box serves as a pppoe/nat box.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I would also like to use the system to burn cd's,
rip audio etc etc.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Everything works fine, but I have an adaptec
2920 (around 2.5 years old) card, and Freebsd refuses to see
it.. </FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I've Recompiled with all the scsi options set, here
is what looks like the card from startup...</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>pci0: <unknown card> (vendor=0x1036,
dev=0x0000) at 17.0 irq 10</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>My Soundblaster, which I just installed, appears to
be using the same irq, but even before installing it, I had this same
results.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>sbc0: <Creative SB16/SB32> at port
0x220-0x22f,0x300-0x301,0x388-0x38b irq 10 drq 0,5 on isa0<BR></DIV></FONT>
<DIV><FONT face=Arial size=2>Here is a copy of my output from dmesg for
reference...</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>aftica# dmesg<BR>Copyright (c) 1992-2000 The
FreeBSD Project.<BR>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991,
1992, 1993, 1994<BR> The Regents of
the University of California. All rights reserved.<BR>FreeBSD 4.2-RELEASE #0:
Fri Dec 22 06:17:39 EST 2000<BR> <A
href="mailto:root@aftica.warzone:/usr/src/sys/compile/AFTICA">root@aftica.warzone:/usr/src/sys/compile/AFTICA</A><BR>Timecounter \
"i8254" frequency 1193182 Hz<BR>Timecounter "TSC" frequency 99474055
Hz<BR>CPU: Pentium/P54C (99.47-MHz 586-class CPU)<BR> Origin =
"GenuineIntel" Id = 0x52c Stepping = 12<BR>
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8><BR>real memory =
100663296 (98304K bytes)<BR>avail memory = 93990912 (91788K bytes)<BR>Preloaded
elf kernel "kernel" at 0xc03e3000.<BR>Intel Pentium detected, installing
workaround for F00F bug<BR>md0: Malloc disk<BR>npx0: <math processor> on
motherboard<BR>npx0: INT 16 interface<BR>pcib0: <Host to PCI bridge> on
motherboard<BR>pci0: <PCI bus> on pcib0<BR>isab0: <Intel 82371FB PCI to
ISA bridge> at device 7.0 on pci0<BR>isa0: <ISA bus> on
isab0<BR>atapci0: <Intel PIIX ATA controller> port 0x3000-0x300f at device
7.1 on pci0<BR>ata0: at 0x1f0 irq 14 on atapci0<BR>pci0: <unknown card>
(vendor=0x1036, dev=0x0000) at 17.0 irq 10<BR>pci0: <S3 ViRGE DX/GX graphics
accelerator> at 18.0 irq 11<BR>fdc0: <NEC 72065B or clone> at port
0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0<BR>fdc0: FIFO enabled, 8 bytes
threshold<BR>fd0: <1440-KB 3.5" drive> on fdc0 drive 0<BR>atkbdc0:
<Keyboard controller (i8042)> at port 0x60,0x64 on isa0<BR>atkbd0: <AT
Keyboard> flags 0x1 irq 1 on atkbdc0<BR>kbd0 at atkbd0<BR>vga0: <Generic
ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0<BR>sc0: <System
console> at flags 0x100 on isa0<BR>sc0: VGA <16 virtual consoles,
flags=0x300><BR>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0<BR>sio0:
type 16550A<BR>sio1 at port 0x2f8-0x2ff irq 3 on isa0<BR>sio1: type
16550A<BR>ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0<BR>ppc0:
SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode<BR>ppc0: FIFO with
16/16/15 bytes threshold<BR>lpt0: <Printer> on ppbus0<BR>lpt0:
Interrupt-driven port<BR>ppi0: <Parallel I/O> on ppbus0<BR>ep0: <3Com
3C509-TPO EtherLink III> at port 0x310-0x31f irq 9 on isa0<BR>ep0: Ethernet
address 00:60:97:6b:e8:f4<BR>ep1: <3Com 3C509-TPO EtherLink III> at port
0x210-0x21f irq 5 on isa0<BR>ep1: Ethernet address 00:60:97:6b:e9:7c<BR>sbc0:
<Creative SB16/SB32> at port 0x220-0x22f,0x300-0x301,0x388-0x38b irq 10
drq 0,5 on isa0<BR>pcm0: <SB DSP 4.13> on sbc0<BR>IP Filter: v3.4.8
initialized. Default = pass all, Logging = enabled<BR>ad0: 1628MB
<QUANTUM FIREBALL_TM1700A> [3309/16/63] at ata0-master WDMA2<BR>Mounting
root from ufs:/dev/ad0s1a<BR>module_register: module netgraph already
exists!<BR>linker_file_sysinit "netgraph.ko" failed to register!
17<BR>aftica#<BR></FONT></DIV>
<DIV><FONT face=Arial size=2>Any ideas?</FONT></DIV>
<DIV><FONT face=Arial size=2>thanks</DIV>
<DIV><BR></DIV></FONT></FONT></DIV></BODY></HTML>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic