[prev in list] [next in list] [prev in thread] [next in thread]
List: freebsd-arm
Subject: TS-7200 updated for -current...
From: John-Mark Gurney <gurney_j () resnet ! uoregon ! edu>
Date: 2006-03-14 1:21:56
Message-ID: 20060314012156.GQ840 () funkthat ! com
[Download RAW message or body]
Just thought the group would like to know that I've updated the TS-7200
port in perforce to work w/ -current now. I can boot, but I'm again
having issues w/ DNS queries lossing carrier, but NFS traffic works
fine...
I've updated the dmesg at: http://people.freebsd.org/~jmg/dmesg.ts7200
$ uname -a
FreeBSD dynam14.funkthat.com 7.0-CURRENT FreeBSD 7.0-CURRENT #18: Mon Mar 13 16:53:24 \
PST 2006 jmg@carbon.funkthat.com:/usr/home/jmg/p4/arm/src/sys/arm/compile/TS7200 \
arm $ df -k
Filesystem 1K-blocks Used Avail Capacity Mounted on
192.168.0.21:/a/diskless/arm 38030356 29451556 5536372 84% /
devfs 1 1 0 100% /dev
$ tty
/dev/ttyu0
$ ifconfig epe0
epe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::2d0:69ff:fe40:4fa%epe0 prefixlen 64 scopeid 0x1
inet 192.168.0.53 netmask 0xffffff00 broadcast 192.168.0.255
ether 00:d0:69:40:04:fa
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
hmmm... looks like I need to figure out what's up with the CF slot..
--
John-Mark Gurney Voice: +1 415 225 5579
"All that I will do, has been done, All that I have, has not."
_______________________________________________
freebsd-arm@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-arm
To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic