[prev in list] [next in list] [prev in thread] [next in thread]
List: freebsd-amd64
Subject: RE: sk0 problems on an Asus K8VSE Delux
From: "Lawrence Farr" <freebsd-smp () epcdirect ! co ! uk>
Date: 2004-07-01 22:03:56
Message-ID: 20040701220357.D37294421 () gunfright ! epcdirect ! co ! uk
[Download RAW message or body]
Hi Bjoern,
I've tried with 5.2.1, and CURRENT as of today with the same result.
An FXP has no issues in the same machine. DHCP works, but takes a
long time.
Lawrence Farr
EPC Direct Limited
> -----Original Message-----
> From: Bjoern A. Zeeb [mailto:bzeeb-lists@lists.zabbadoz.net]
> Sent: 01 July 2004 19:18
> To: Lawrence Farr
> Cc: freebsd-amd64@FreeBSD.org
> Subject: Re: sk0 problems on an Asus K8VSE Delux
>
> On Thu, 1 Jul 2004, Lawrence Farr wrote:
>
> > I have problems with my sk0 on an Asus K8V SE Deluxe board:
> >
> > It's built in to the board.
> > Running 5.2.1, or CURRENT from today, the interface stops if you
> > use CVSUP or NFS after a few seconds. If you ifconfig down it a
> > few times, then bring it back up, it will be working again for a
> > few seconds.
> ...
> > Anyone got any ideas where to start looking? ACPI and APIC enabled
> > or disabled makes no difference. I've also put the newest BIOS
> > available on. Switch on the other end is a Summit Extreme 48.
>
> try getting a current onto the machine - this will improve the
> situation that sk will not lose connectivity; there are still some
> issues:
>
> - a LOR caused by locking in attach routine.
>
> - DHCP doesn't work on startup here; the sk takes to long to come
> up; actually the machine ist up; I can login with a keyboard and
> about at this point the sk comes up; this might be an issue with
> the locking in the attach case; I think someone started to work
> on this but I cannot remember who and if he finished.
>
> HTH
>
> --
> Bjoern A. Zeeb bzeeb at
> Zabbadoz dot NeT
>
_______________________________________________
freebsd-amd64@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-amd64
To unsubscribe, send any mail to "freebsd-amd64-unsubscribe@freebsd.org"
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic