[prev in list] [next in list] [prev in thread] [next in thread] 

List:       focus-ms
Subject:    RE: Integrating Domain and VPN Login
From:       "Ryan Kubiak" <rkubiak () btc-bci ! com>
Date:       2005-04-06 12:37:53
Message-ID: DKEDLAHPABOMHIMJFEFNOEELCCAA.rkubiak () btc-bci ! com
[Download RAW message or body]

More than likely I was misinformed and these machines are not actually
joined to the domain.  I'll have him join these machines and see if that
fixes it.  Thanks!

-----Original Message-----
From: Ryan Gravlin [mailto:RGravlin@newvision-inc.com]
Sent: Tuesday, April 05, 2005 3:14 PM
To: Ryan Kubiak; focus-ms@securityfocus.com
Subject: RE: Integrating Domain and VPN Login


Not really sure what to tell you on this.  There's only 2 reasons why it
wouldn't be showing up as far as I know:

1) the machine is not joined to the domain
2) the options button has been pushed and hides domain drop-down &
dial-up connection checkbox

I've done very little RRAS stuff so I wouldn't be able to elborate on
that.  Hope this helps!

Thanks,
Ryan Gravlin

New Vision Consulting, Inc.

-----Original Message-----
From: Ryan Kubiak [mailto:rkubiak@btc-bci.com]
Sent: Tuesday, April 05, 2005 12:09 PM
To: focus-ms@securityfocus.com
Subject: RE: Integrating Domain and VPN Login

Is there any reason that check box would not be available on these
machines?
They were previously at the same location as the domain controller and
were joined to the domain at that time.

-----Original Message-----
From: Ryan Gravlin [mailto:RGravlin@newvision-inc.com]
Sent: Tuesday, April 05, 2005 9:43 AM
To: Ryan Kubiak; focus-ms@securityfocus.com
Subject: RE: Integrating Domain and VPN Login


This can be accomplished through the check box that says 'Logon using a
dial-up connection' at the logon screen.  This can also include a VPN
profile.

There are other ways of accomplishing this too.  CheckPoint's SecuRemote
has a secure domain logon feature, which basically halts the process of
authenticating with the domain controller until it has established a VPN
connection with the site.  It shoots the authentication over the
encrypted tunnel and continues to login using the lmhosts and hosts file
for static mappings.

I hope that helps.

Ryan Gravlin

New Vision Consulting, Inc.

-----Original Message-----
From: Ryan Kubiak [mailto:rkubiak@btc-bci.com]
Sent: Monday, April 04, 2005 9:59 AM
To: focus-ms@securityfocus.com
Subject: Integrating Domain and VPN Login

I'm trying to find a way to integrate a login to a VPN with a domain
login.
Users at a remote office currently login using a cached profile then
manually start a VPN connection using the client included with XP Pro.
These machines are then authenticating to the Windows 2000 server at the
central office.  I know in NT4 there was a check box for dial up
authentication to a domain, however is there anything similar to this
for XP to allow seamless integration of these two logins?  I tried
setting the VPN to login using the Windows credentials and putting a
shortcut in the startup folder, however the VPN connection does not
start that way for some reason.

Ryan


------------------------------------------------------------------------
---
------------------------------------------------------------------------
---


------------------------------------------------------------------------
---
------------------------------------------------------------------------
---


---------------------------------------------------------------------------
---------------------------------------------------------------------------


---------------------------------------------------------------------------
---------------------------------------------------------------------------

[prev in list] [next in list] [prev in thread] [next in thread]