[prev in list] [next in list] [prev in thread] [next in thread]
List: flightgear-devel
Subject: Re: [Flightgear-devel] Flightgear 3.2?
From: grtuxhangar team <hohorange () gmail ! com>
Date: 2014-08-20 14:44:21
Message-ID: CAFEVUtD4SvGpSVP92UjvcbNU2+iv30QFPkEvvM8AXno6Le6cug () mail ! gmail ! com
[Download RAW message or body]
[Attachment #2 (multipart/alternative)]
Hello, Adam
I am not optimistic about it .
The first alarm was
crash in SGPropertyNode::fireValueChanged dated June-04,
along these past weeks the issue has not been fixed.
I guess it won't be.
Regards
Ahmad
On 20 August 2014 14:45, Adam Dershowitz <adershowitz@exponent.com> wrote:
> I guess that's good news…from a debugging point of view.
>
> -- Adam
>
>
> From: grtuxhangar team <hohorange@gmail.com>
>
> Reply-To: FlightGear developers discussions <
> flightgear-devel@lists.sourceforge.net>
> Date: Tuesday, August 19, 2014 at 8:19 PM
>
> To: FlightGear developers discussions <
> flightgear-devel@lists.sourceforge.net>
> Subject: Re: [Flightgear-devel] Flightgear 3.2?
>
> Hi Adam
>
> That issue is not specific on Mac, since we are getting the same issue
> with Linux on PC.
>
> Regards
>
> Ahmad
>
>
> On 20 August 2014 01:04, Adam Dershowitz <adershowitz@exponent.com> wrote:
>
>> I have been testing this new release on my Mac. First, you solved the
>> —jpg-httpd problem. Thank you for the help working through it, and getting
>> it fixed.
>>
>> But, this new release won't run for more then a minute or two without a
>> segmentation fault. If I ran with all default settings, so just do ./fgfs
>> at the command line, it starts up just fine at SFO in a 172. It runs for a
>> bit then crashes. It doesn't seem to matter if I actually fly, or just let
>> it sit there after startup and do nothing without even starting the engine.
>>
>>
>> Has anyone else with a Mac been seeing this on the new RC? Any
>> suggestions for what is going on here, or what to do about it?
>>
>>
>> What I see at the command line:
>>
>> ./fgfs
>>
>> Enabling ATI viewport hack
>>
>> environment init
>>
>> KMA20 audio panel initialized
>>
>> KI266 dme indicator #0 initialized
>>
>> Sorry, qdot doesn't appear to be trimmable
>>
>> Trim Results:
>>
>> Altitude AGL: 4.3 wdot: 3.21e+01 Tolerance: 1e-03 Failed
>>
>> Pitch Angle: -0.044 qdot: 1.60e-04 Tolerance: 1e-04 Failed
>>
>> Roll Angle: -0.063 pdot: -3.86e-06 Tolerance: 1e-04 Passed
>>
>>
>> Trim Statistics:
>>
>> Total Iterations: 3
>>
>> Sub-iterations:
>>
>> wdot: 11 average: 3.6667 successful: 1 stability: 2
>>
>> qdot: 0 average: 0 successful: 0 stability: 2
>>
>> pdot: 27 average: 9 successful: 3 stability: 2
>>
>> Run Count: 126
>>
>> Electrical system initialized
>>
>> KAP140 power up
>>
>> Could not find at least one of the following objects for animation:
>> 'terminal_2'
>>
>> Could not find at least one of the following objects for animation:
>> 'terminal_2'
>>
>> Segmentation fault: 11
>>
>> And the first part of the crash log:
>>
>> Process: fgfs [86599]
>> Path:
>> /Users/USER/Desktop/*/FlightGear.app/Contents/MacOS/./fgfs
>> Identifier: org.flightgear.FlightGear
>> Version: 3.2.0 (3.2.0)
>> Code Type: X86-64 (Native)
>> Parent Process: bash [83537]
>> Responsible: Terminal [540]
>> User ID: 1224806835
>>
>> Date/Time: 2014-08-19 19:02:38.179 -0400
>> OS Version: Mac OS X 10.9.4 (13E28)
>> Report Version: 11
>> Anonymous UUID: 1D77F421-0BFD-3CEA-3669-D9C3391C1488
>>
>> Sleep/Wake UUID: 63A8DEF6-69EA-4AD2-BD1B-0A26EACB8D78
>>
>> Crashed Thread: 0 Dispatch queue: com.apple.main-thread
>>
>> Exception Type: EXC_BAD_ACCESS (SIGSEGV)
>> Exception Codes: EXC_I386_GPFLT
>>
>> Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
>> 0 fgfs 0x000000010d9cda4a
>> SGPropertyNode::set_float(float) + 90
>> 1 fgfs 0x000000010d9ca4f6
>> SGPropertyNode::setDoubleValue(double) + 230
>> 2 fgfs 0x000000010d0ae2a0
>> FGXMLAutopilot::DigitalFilter::update(bool, double) + 1344
>> 3 fgfs 0x000000010da2b59e
>> SGSubsystemGroup::Member::update(double) + 78
>> 4 fgfs 0x000000010da2a898
>> SGSubsystemGroup::update(double) + 264
>> 5 fgfs 0x000000010da2b59e
>> SGSubsystemGroup::Member::update(double) + 78
>> 6 fgfs 0x000000010da2a898
>> SGSubsystemGroup::update(double) + 264
>> 7 fgfs 0x000000010da2b59e
>> SGSubsystemGroup::Member::update(double) + 78
>> 8 fgfs 0x000000010da2a898
>> SGSubsystemGroup::update(double) + 264
>> 9 fgfs 0x000000010da2c297
>> SGSubsystemMgr::update(double) + 39
>> 10 fgfs 0x000000010d2c3326 fgMainLoop() + 70
>> 11 fgfs 0x000000010d554e58 fgOSMainLoop() + 88
>> 12 fgfs 0x000000010d2c2d2f fgMainInit(int,
>> char**) + 2623
>> 13 fgfs 0x000000010d290c7c main + 236
>> 14 fgfs 0x000000010cfec5a4 start + 52
>>
>> Thread 1:: Dispatch queue: com.apple.libdispatch-manager
>> 0 libsystem_kernel.dylib 0x00007fff81b37662 kevent64 + 10
>> 1 libdispatch.dylib 0x00007fff8bbac421
>> _dispatch_mgr_invoke + 239
>> 2 libdispatch.dylib 0x00007fff8bbac136
>> _dispatch_mgr_thread + 52
>>
>>
>>
>>
>> -- Adam
>>
>>
>> From: Clement de l'Hamaide <clemaez@hotmail.fr>
>> Reply-To: FlightGear developers discussions <
>> flightgear-devel@lists.sourceforge.net>
>> Date: Monday, August 18, 2014 at 12:07 PM
>> To: FlightGear developers discussions <
>> flightgear-devel@lists.sourceforge.net>
>> Subject: Re: [Flightgear-devel] Flightgear 3.2?
>>
>> Hi,
>>
>> Everything has been built (Mac, Linux, Windows) but not yet uploaded on
>> our mirror servers.
>>
>> On my side I know at least 1 Mac user + 2 Windows users who tested these
>> build and they didn't report any bug.
>> Myself I've tested the Windows built with success.
>>
>> I would suggest to announce these build as official release, then next
>> (if required) will be version 3.2.1
>>
>> I will ask Curt to upload these build on our mirror servers.
>>
>>
>> Kinds regards,
>> Clément
>>
>>
>> ------------------------------------------------------------------------------
>> Slashdot TV.
>> Video for Nerds. Stuff that matters.
>> http://tv.slashdot.org/
>> _______________________________________________
>> Flightgear-devel mailing list
>> Flightgear-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/flightgear-devel
>>
>>
>
>
> ------------------------------------------------------------------------------
> Slashdot TV.
> Video for Nerds. Stuff that matters.
> http://tv.slashdot.org/
> _______________________________________________
> Flightgear-devel mailing list
> Flightgear-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/flightgear-devel
>
>
[Attachment #5 (text/html)]
<div dir="ltr"><div><div><div><div>Hello, Adam<br><br></div>I am not optimistic about \
it .<br></div>The first alarm was <br>crash in SGPropertyNode::fireValueChanged dated \
June-04, <br>along these past weeks the issue has not been fixed.<br> <br></div>I \
guess it won't be.<br><br></div><div>Regards<br><br></div>Ahmad<br></div><div \
class="gmail_extra"><br><br><div class="gmail_quote">On 20 August 2014 14:45, Adam \
Dershowitz <span dir="ltr"><<a href="mailto:adershowitz@exponent.com" \
target="_blank">adershowitz@exponent.com</a>></span> wrote:<br> <blockquote \
class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc \
solid;padding-left:1ex">
<div style="word-wrap:break-word;color:rgb(0,0,0);font-size:14px;font-family:Calibri,sans-serif">
<div>
<div>
<div>I guess that's good news…from a debugging point of view.</div>
<div>
<div><br>
</div>
<div>-- Adam</div>
<div><br>
</div>
</div>
</div>
</div>
<div><br>
</div>
<span>
<div style="font-family:Calibri;font-size:11pt;text-align:left;color:black;BORDER-BOTTOM:medium \
none;BORDER-LEFT:medium \
none;PADDING-BOTTOM:0in;PADDING-LEFT:0in;PADDING-RIGHT:0in;BORDER-TOP:#b5c4df 1pt \
solid;BORDER-RIGHT:medium none;PADDING-TOP:3pt">
<span style="font-weight:bold">From: </span>grtuxhangar team <<a \
href="mailto:hohorange@gmail.com" target="_blank">hohorange@gmail.com</a>><div \
class=""><br> <span style="font-weight:bold">Reply-To: </span>FlightGear developers \
discussions <<a href="mailto:flightgear-devel@lists.sourceforge.net" \
target="_blank">flightgear-devel@lists.sourceforge.net</a>><br> </div><span \
style="font-weight:bold">Date: </span>Tuesday, August 19, 2014 at 8:19 PM<div><div \
class="h5"><br> <span style="font-weight:bold">To: </span>FlightGear developers \
discussions <<a href="mailto:flightgear-devel@lists.sourceforge.net" \
target="_blank">flightgear-devel@lists.sourceforge.net</a>><br> <span \
style="font-weight:bold">Subject: </span>Re: [Flightgear-devel] Flightgear 3.2?<br> \
</div></div></div><div><div class="h5"> <div><br>
</div>
<div>
<div>
<div dir="ltr">
<div>
<div>
<div>Hi Adam<br>
<br>
</div>
That issue is not specific on Mac, since we are getting the same issue with Linux on \
PC.<br> <br>
</div>
Regards<br>
<br>
</div>
Ahmad<br>
</div>
<div class="gmail_extra"><br>
<br>
<div class="gmail_quote">On 20 August 2014 01:04, Adam Dershowitz <span dir="ltr">
<<a href="mailto:adershowitz@exponent.com" \
target="_blank">adershowitz@exponent.com</a>></span> wrote:<br> <blockquote \
class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc \
solid;padding-left:1ex"> <div \
style="word-wrap:break-word;color:rgb(0,0,0);font-size:14px;font-family:Calibri,sans-serif">
<div>
<div>I have been testing this new release on my Mac. First, you solved the \
—jpg-httpd problem. Thank you for the help working through it, and getting it \
fixed.</div> <div><br>
</div>
<div>But, this new release won't run for more then a minute or two without a \
segmentation fault. If I ran with all default settings, so just do ./fgfs at the \
command line, it starts up just fine at SFO in a 172. It runs for a bit then \
crashes. It doesn't seem to matter if I actually fly, or just let it sit there \
after startup and do nothing without even starting the engine. </div> <div><br>
</div>
<div>Has anyone else with a Mac been seeing this on the new RC? Any suggestions for \
what is going on here, or what to do about it?</div> <div><br>
</div>
<div><br>
</div>
<div>What I see at the command line:</div>
<div>
<p style="margin:0px;font-size:11px;font-family:Menlo">./fgfs </p>
<p style="margin:0px;font-size:11px;font-family:Menlo">Enabling ATI viewport hack</p>
<p style="margin:0px;font-size:11px;font-family:Menlo">environment init</p>
<p style="margin:0px;font-size:11px;font-family:Menlo">KMA20 audio panel \
initialized</p> <p style="margin:0px;font-size:11px;font-family:Menlo">KI266 dme \
indicator #0 initialized</p> <p style="margin:0px;font-size:11px;font-family:Menlo"> \
Sorry, qdot doesn't appear to be trimmable</p> <p \
style="margin:0px;font-size:11px;font-family:Menlo"> Trim Results: </p> <p \
style="margin:0px;font-size:11px;font-family:Menlo"> Altitude AGL: \
4.3 wdot: 3.21e+01 Tolerance: 1e-03 Failed</p> <p \
style="margin:0px;font-size:11px;font-family:Menlo"> Pitch Angle: \
-0.044 qdot: 1.60e-04 Tolerance: 1e-04 Failed</p> <p \
style="margin:0px;font-size:11px;font-family:Menlo"> Roll Angle: \
-0.063 pdot: -3.86e-06 Tolerance: 1e-04 Passed</p> <p \
style="margin:0px;font-size:11px;font-family:Menlo;min-height:13px"><br> </p>
<p style="margin:0px;font-size:11px;font-family:Menlo"> Trim Statistics: </p>
<p style="margin:0px;font-size:11px;font-family:Menlo"> Total Iterations: 3</p>
<p style="margin:0px;font-size:11px;font-family:Menlo"> Sub-iterations:</p>
<p style="margin:0px;font-size:11px;font-family:Menlo"> wdot: 11 average: 3.6667 \
successful: 1 stability: 2</p> <p \
style="margin:0px;font-size:11px;font-family:Menlo"> qdot: 0 average: 0 \
successful: 0 stability: 2</p> <p \
style="margin:0px;font-size:11px;font-family:Menlo"> pdot: 27 average: 9 \
successful: 3 stability: 2</p> <p \
style="margin:0px;font-size:11px;font-family:Menlo"> Run Count: 126</p> <p \
style="margin:0px;font-size:11px;font-family:Menlo">Electrical system initialized</p> \
<p style="margin:0px;font-size:11px;font-family:Menlo">KAP140 power up</p> <p \
style="margin:0px;font-size:11px;font-family:Menlo">Could not find at least one of \
the following objects for animation: 'terminal_2'</p> <p \
style="margin:0px;font-size:11px;font-family:Menlo">Could not find at least one of \
the following objects for animation: 'terminal_2'</p> <p \
style="margin:0px;font-size:11px;font-family:Menlo">Segmentation fault: 11</p> </div>
<div><br>
</div>
<div>And the first part of the crash log:</div>
<div><br>
</div>
<div>
<div>Process: fgfs [86599]</div>
<div>Path: \
/Users/USER/Desktop/*/FlightGear.app/Contents/MacOS/./fgfs</div> <div>Identifier: \
org.flightgear.FlightGear</div> <div>Version: 3.2.0 (3.2.0)</div>
<div>Code Type: X86-64 (Native)</div>
<div>Parent Process: bash [83537]</div>
<div>Responsible: Terminal [540]</div>
<div>User ID: 1224806835</div>
<div><br>
</div>
<div>Date/Time: 2014-08-19 19:02:38.179 -0400</div>
<div>OS Version: Mac OS X 10.9.4 (13E28)</div>
<div>Report Version: 11</div>
<div>Anonymous UUID: 1D77F421-0BFD-3CEA-3669-D9C3391C1488</div>
<div><br>
</div>
<div>Sleep/Wake UUID: 63A8DEF6-69EA-4AD2-BD1B-0A26EACB8D78</div>
<div><br>
</div>
<div>Crashed Thread: 0 Dispatch queue: com.apple.main-thread</div>
<div><br>
</div>
<div>Exception Type: EXC_BAD_ACCESS (SIGSEGV)</div>
<div>Exception Codes: EXC_I386_GPFLT</div>
<div><br>
</div>
<div>Thread 0 Crashed:: Dispatch queue: com.apple.main-thread</div>
<div>0 fgfs <span \
style="white-space:pre-wrap"> </span> 0x000000010d9cda4a \
SGPropertyNode::set_float(float) + 90</div> <div>1 fgfs \
<span style="white-space:pre-wrap"> </span> 0x000000010d9ca4f6 \
SGPropertyNode::setDoubleValue(double) + 230</div> <div>2 fgfs \
<span style="white-space:pre-wrap"> </span> 0x000000010d0ae2a0 \
FGXMLAutopilot::DigitalFilter::update(bool, double) + 1344</div> <div>3 fgfs \
<span style="white-space:pre-wrap"> </span> 0x000000010da2b59e \
SGSubsystemGroup::Member::update(double) + 78</div> <div>4 fgfs \
<span style="white-space:pre-wrap"> </span> 0x000000010da2a898 \
SGSubsystemGroup::update(double) + 264</div> <div>5 fgfs \
<span style="white-space:pre-wrap"> </span> 0x000000010da2b59e \
SGSubsystemGroup::Member::update(double) + 78</div> <div>6 fgfs \
<span style="white-space:pre-wrap"> </span> 0x000000010da2a898 \
SGSubsystemGroup::update(double) + 264</div> <div>7 fgfs \
<span style="white-space:pre-wrap"> </span> 0x000000010da2b59e \
SGSubsystemGroup::Member::update(double) + 78</div> <div>8 fgfs \
<span style="white-space:pre-wrap"> </span> 0x000000010da2a898 \
SGSubsystemGroup::update(double) + 264</div> <div>9 fgfs \
<span style="white-space:pre-wrap"> </span> 0x000000010da2c297 \
SGSubsystemMgr::update(double) + 39</div> <div>10 fgfs \
<span style="white-space:pre-wrap"> </span> 0x000000010d2c3326 fgMainLoop() + \
70</div> <div>11 fgfs <span \
style="white-space:pre-wrap"> </span> 0x000000010d554e58 fgOSMainLoop() + 88</div>
<div>12 fgfs <span \
style="white-space:pre-wrap"> </span> 0x000000010d2c2d2f fgMainInit(int, char**) + \
2623</div> <div>13 fgfs <span \
style="white-space:pre-wrap"> </span> 0x000000010d290c7c main + 236</div>
<div>14 fgfs <span \
style="white-space:pre-wrap"> </span> 0x000000010cfec5a4 start + 52</div>
<div><br>
</div>
<div>Thread 1:: Dispatch queue: com.apple.libdispatch-manager</div>
<div>0 libsystem_kernel.dylib <span style="white-space:pre-wrap"> \
</span> 0x00007fff81b37662 kevent64 + 10</div>
<div>1 libdispatch.dylib <span \
style="white-space:pre-wrap"></span>0x00007fff8bbac421 _dispatch_mgr_invoke + \
239</div> <div>2 libdispatch.dylib <span \
style="white-space:pre-wrap"></span>0x00007fff8bbac136 _dispatch_mgr_thread + \
52</div> </div>
<div><br>
</div>
<div><br>
</div>
<div><br>
</div>
<div>
<div><br>
</div>
<div>-- Adam</div>
<div><br>
</div>
</div>
</div>
<div><br>
</div>
<span>
<div style="font-family:Calibri;font-size:11pt;text-align:left;color:black;BORDER-BOTTOM:medium \
none;BORDER-LEFT:medium \
none;PADDING-BOTTOM:0in;PADDING-LEFT:0in;PADDING-RIGHT:0in;BORDER-TOP:#b5c4df 1pt \
solid;BORDER-RIGHT:medium none;PADDING-TOP:3pt">
<span style="font-weight:bold">From: </span>Clement de l'Hamaide <<a \
href="mailto:clemaez@hotmail.fr" target="_blank">clemaez@hotmail.fr</a>><br> <span \
style="font-weight:bold">Reply-To: </span>FlightGear developers discussions <<a \
href="mailto:flightgear-devel@lists.sourceforge.net" \
target="_blank">flightgear-devel@lists.sourceforge.net</a>><br> <span \
style="font-weight:bold">Date: </span>Monday, August 18, 2014 at 12:07 PM<br> <span \
style="font-weight:bold">To: </span>FlightGear developers discussions <<a \
href="mailto:flightgear-devel@lists.sourceforge.net" \
target="_blank">flightgear-devel@lists.sourceforge.net</a>><br> <span \
style="font-weight:bold">Subject: </span>Re: [Flightgear-devel] Flightgear 3.2?<br> \
</div> <div>
<div>
<div><br>
</div>
<div>
<div>
<div dir="ltr">Hi,<br>
<br>
Everything has been built (Mac, Linux, Windows) but not yet uploaded on our mirror \
servers.<br> <br>
On my side I know at least 1 Mac user + 2 Windows users who tested these build and \
they didn't report any bug.<br> Myself I've tested the Windows built with \
success.<br> <br>
I would suggest to announce these build as official release, then next (if required) \
will be version 3.2.1<br> <br>
I will ask Curt to upload these build on our mirror servers.<br>
<br>
<br>
Kinds regards,<br>
Clément<br>
</div>
</div>
</div>
</div>
</div>
</span></div>
<br>
------------------------------------------------------------------------------<br>
Slashdot TV.<br>
Video for Nerds. Stuff that matters.<br>
<a href="http://tv.slashdot.org/" target="_blank">http://tv.slashdot.org/</a><br>
_______________________________________________<br>
Flightgear-devel mailing list<br>
<a href="mailto:Flightgear-devel@lists.sourceforge.net" \
target="_blank">Flightgear-devel@lists.sourceforge.net</a><br> <a \
href="https://lists.sourceforge.net/lists/listinfo/flightgear-devel" \
target="_blank">https://lists.sourceforge.net/lists/listinfo/flightgear-devel</a><br> \
<br> </blockquote>
</div>
<br>
</div>
</div>
</div>
</div></div></span>
</div>
<br>------------------------------------------------------------------------------<br>
Slashdot TV.<br>
Video for Nerds. Stuff that matters.<br>
<a href="http://tv.slashdot.org/" \
target="_blank">http://tv.slashdot.org/</a><br>_______________________________________________<br>
Flightgear-devel mailing list<br>
<a href="mailto:Flightgear-devel@lists.sourceforge.net">Flightgear-devel@lists.sourceforge.net</a><br>
<a href="https://lists.sourceforge.net/lists/listinfo/flightgear-devel" \
target="_blank">https://lists.sourceforge.net/lists/listinfo/flightgear-devel</a><br> \
<br></blockquote></div><br></div>
------------------------------------------------------------------------------
Slashdot TV.
Video for Nerds. Stuff that matters.
http://tv.slashdot.org/
_______________________________________________
Flightgear-devel mailing list
Flightgear-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/flightgear-devel
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic