[prev in list] [next in list] [prev in thread] [next in thread] 

List:       flashrom
Subject:    [flashrom] Re: report can't write fw with hp 8200 ssf
From:       Nico Huber <nico.h () gmx ! de>
Date:       2021-10-31 17:48:30
Message-ID: f1cfc6de-2a5d-5e12-5625-b743aba1cdb8 () gmx ! de
[Download RAW message or body]

Hi,

your email got mangled or was from the beginning, so I can't reply
inline. Better *don't* use HTML when copying program output, or better
don't use HTML for emails at all.

This was the interesting part (it would have been easier to spot with
less verbosity):

> BIOS_CNTL = 0x02: BIOS Lock Enable: enabled, BIOS Write Enable: disabled
> Warning: Setting Bios Control at 0xdc from 0x02 to 0x01 failed.
> New value is 0x02.

This means that your currently running firmware doesn't allow you to
write to the flash chip. Sometimes there's an option in the BIOS setup,
but IIRC chances are low for this machine.

Nico

_______________________________________________
flashrom mailing list -- flashrom@flashrom.org
To unsubscribe send an email to flashrom-leave@flashrom.org
[prev in list] [next in list] [prev in thread] [next in thread]