[prev in list] [next in list] [prev in thread] [next in thread]
List: flashrom
Subject: [flashrom] Programmer initialization failed
From: Dominik G <www.dominikg () gmail ! com>
Date: 2021-04-04 17:01:28
Message-ID: CAGhkjw6DEE9N0NTnH0_c3v_nE354QdiQFOptSS=fG810bLTyMA () mail ! gmail ! com
[Download RAW message or body]
[Attachment #2 (multipart/alternative)]
Hi,
I am trying to run flashrom but I am not able to. For my program I use
Arduino Nano on which I uploaded frser-duino. I repeated the steps in the
instructions on your site on the other computer and virtual machine. I
don't know why it doesn't work. I even tried to upload the old version of
the serprog-duino from github. Every time I type the basic command
*"flashrom -p serprog:dev=/dev/ ttyUSB0: 2000000" *
I get the error
*"Error: cannot synchronize protocol - check communications and reset
device?*
*"Error: Programmer initialization failed .. "*
I tried to edit the makefile attached to frser-duino, but there's not much
to change there. According to the creator, the file is preconfigured for
atmega328p which is in my arduino so it should work right away. I also
edited the command changing the last value from 2000000 to 9600, 56700,
115200 and 256000. I hope you have some idea.
I suspect that the matter may be related to the software loaded on arduino,
but looking at github from May 17, 2020, the author of frser-duino did not
manage to correct the readme file at the request of one of the users in the
"Issues" section.
[Attachment #5 (text/html)]
<div dir="ltr">Hi,<br><br>I am trying to run flashrom but I am not able to. For my \
program I use Arduino Nano on which I uploaded frser-duino. I repeated the steps in \
the instructions on your site on the other computer and virtual machine. I don't \
know why it doesn't work. I even tried to upload the old version of the \
serprog-duino from github. Every time I type the basic command \
<div><b>"flashrom -p serprog:dev=/dev/ ttyUSB0: 2000000" </b></div><div>I \
get the error </div><div><b>"Error: cannot synchronize protocol - check \
communications and reset device?</b></div><div><b>"Error: Programmer \
initialization failed .. "</b></div><div>I tried to edit the makefile attached \
to frser-duino, but there's not much to change there. According to the creator, \
the file is preconfigured for atmega328p which is in my arduino so it should work \
right away. I also edited the command changing the last value from 2000000 to 9600, \
56700, 115200 and 256000. I hope you have some idea.</div><div>I suspect that the \
matter may be related to the software loaded on arduino, but looking at github from \
May 17, 2020, the author of frser-duino did not manage to correct the readme file at \
the request of one of the users in the "Issues" section.<br></div></div>
_______________________________________________
flashrom mailing list -- flashrom@flashrom.org
To unsubscribe send an email to flashrom-leave@flashrom.org
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic