[prev in list] [next in list] [prev in thread] [next in thread]
List: flashrom
Subject: [flashrom] GIGABYTE - GA-8IPE1000MK - ERASE FAILED!
From: af () zion ! zone4web ! com
Date: 2010-03-26 23:01:57
Message-ID: d1ead9ab8e79add413c27cc50f6b6fcb.squirrel () zion ! zone4web ! com
[Download RAW message or body]
Hello,
First - Great tool - Great job - Thanks !
Please excuse my _great_ english. Atleast it should be understandable enough.
Here is my problem:
I'm trying to update the bios of GA-8IPE1000MK board from GIGABYTE.
Here is the output of flashrom which explains the problem:
-------------->
# flashrom -w pe1000mk.f14
flashrom v0.9.1-r710
No coreboot table found.
Found chipset "Intel ICH5/ICH5R", enabling flash write... OK.
This chipset supports the following protocols: Non-SPI.
Calibrating delay loop... OK.
Found chip "SST SST49LF002A/B" (256 KB, FWH) at physical address 0xfffc0000.
Flash image seems to be a legacy BIOS. Disabling checks.
Writing flash chip... ERASE FAILED at 0x00000000! Expected=0xff,
Read=0x25, failed byte count from 0x00000000-0x00003fff: 0x3fb6
ERASE FAILED!
ERASE FAILED!
ERASE FAILED!
ERASE FAILED!
FAILED!
Your flash chip is in an unknown state.
Get help on IRC at irc.freenode.net channel #flashrom or
mail flashrom@flashrom.org
------------------------------------------------------------
DO NOT REBOOT OR POWEROFF!
<-----------------
After that I verified if flashrom actually changed something. I have a
backup of the original bios and used it for the verify procedure.
Rebooted and everything works normal with the old bios.
Here is a link to bios update:
http://download.gigabyte.eu/FileList/BIOS/motherboard_bios_ga-8ipe1000mk_f14.exe
The .exe file can be extracted under linux with p7zip.
I'm attaching the output of 'flashrom -V', 'lspci -nnvvvxxx', 'superiotool
-deV'
I hope this information is something to start.
Thanks for your time!
["flashrom-V.txt" (text/plain)]
flashrom v0.9.1-r710
No coreboot table found.
Found chipset "Intel ICH5/ICH5R", enabling flash write...
BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1
OK.
This chipset supports the following protocols: Non-SPI.
Calibrating delay loop... 408M loops per second, 100 myus = 102 us. OK.
Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0x10, id2 0xdb
Probing for AMD Am29F002(N)BB, 256 KB: Chip lacks correct probe timing information, \
using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x57 Probing for AMD \
Am29F002(N)BT, 256 KB: Chip lacks correct probe timing information, using default \
10mS/40uS. probe_jedec: id1 0xbf, id2 0x57 Probing for AMD Am29F016D, 2048 KB: \
probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F040B, 512 KB: probe_29f040b: \
id1 0x25, id2 0x7f Probing for AMD Am29F080B, 1024 KB: Chip lacks correct probe \
timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x57 Probing \
for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0x25, id2 0x7f Probing for AMD \
Am29LV081B, 1024 KB: probe_29f040b: id1 0x25, id2 0x7f Probing for ASD AE49F2008, 256 \
KB: Chip lacks correct probe timing information, using default 10mS/40uS. \
probe_jedec: id1 0xbf, id2 0x57 Probing for Atmel AT25DF021, 256 KB: skipped. Host \
bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel \
AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are \
incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI \
and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: \
skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for \
Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are \
incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI \
and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: \
skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for \
Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are \
incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and \
chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. \
Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel \
AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are \
incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI \
and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: \
skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for \
Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are \
incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and \
chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: probe_jedec: \
id1 0xbf, id2 0x57 Probing for Atmel AT29C010A, 128 KB: probe_jedec: id1 0xbf, id2 \
0x57 Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0xbf, id2 0x57
Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0xbf, id2 0x57
Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus \
type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus \
type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, \
256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. \
Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus \
type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus \
type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, \
2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. \
Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus \
type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus \
type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, \
8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. \
Probing for Atmel AT49BV512, 64 KB: Chip lacks correct probe timing information, \
using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x57 Probing for Atmel \
AT49F002(N), 256 KB: Chip lacks correct probe timing information, using default \
10mS/40uS. probe_jedec: id1 0xbf, id2 0x57 Probing for Atmel AT49F002(N)T, 256 KB: \
Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: \
id1 0xbf, id2 0x57 Probing for AMIC A25L40P, 512 KB: skipped. Host bus type Non-SPI \
and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: \
probe_29f002: id1 0xbf, id2 0x57 Probing for AMIC A29002T, 256 KB: probe_29f002: id1 \
0xbf, id2 0x57 Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0x25, id2 0x7f
Probing for AMIC A49LF040A, 512 KB: Chip lacks correct probe timing information, \
using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x57 Probing for EMST F49B002UA, \
256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. \
probe_jedec: id1 0xbf, id2 0x57 Probing for Eon EN25B05, 64 KB: skipped. Host bus \
type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: \
skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for \
Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are \
incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and \
chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host \
bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16, \
2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. \
Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type \
SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type \
Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: \
skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for \
Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are \
incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and \
chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host \
bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 \
KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing \
for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are \
incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and \
chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host \
bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON \
EN29F002(A)(N)B, 256 KB: Chip lacks correct probe timing information, using default \
10mS/40uS. probe_jedec: id1 0xbf, id2 0x57 Probing for EON EN29F002(A)(N)T, 256 KB: \
Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: \
id1 0xbf, id2 0x57 Probing for Fujitsu MBM29F004BC, 512 KB: Chip lacks correct probe \
timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x57 Probing \
for Fujitsu MBM29F004TC, 512 KB: Chip lacks correct probe timing information, using \
default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x57 Probing for Fujitsu MBM29F400BC, \
512 KB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for Fujitsu MBM29F400TC, 512 KB: \
probe_m29f400bt: id1 0x25, id2 0x2d Probing for Intel 28F001BX-B, 128 KB: Chip lacks \
correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 \
0x57 Probing for Intel 28F001BX-T, 128 KB: Chip lacks correct probe timing \
information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x57 Probing for \
Intel 82802AB, 512 KB: probe_82802ab: id1 0x25, id2 0x7f Probing for Intel 82802AC, \
1024 KB: probe_82802ab: id1 0x25, id2 0x7f Probing for Macronix MX25L512, 64 KB: \
skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for \
Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are \
incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI \
and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: \
skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for \
Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are \
incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI \
and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: \
skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for \
Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are \
incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type \
Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 \
KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing \
for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type \
SPI are incompatible. Probing for Macronix MX29F001B, 128 KB: probe_29f002: id1 0xbf, \
id2 0x57 Probing for Macronix MX29F001T, 128 KB: probe_29f002: id1 0xbf, id2 0x57
Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xbf, id2 0x57
Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xbf, id2 0x57
Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0xbf, id2 0x57
Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type \
SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type \
Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 256 KB: \
skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for \
Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are \
incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI \
and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. \
Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC \
Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are \
incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and \
chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host \
bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, \
1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. \
Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type \
SPI are incompatible. Probing for PMC Pm29F0002T, 256 KB: probe_29f040b: id1 0x25, \
id2 0x7f Probing for PMC Pm29F0002B, 256 KB: probe_29f040b: id1 0x25, id2 0x7f
Probing for PMC Pm39LV010, 128 KB: Chip lacks correct probe timing information, using \
default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x57 Probing for PMC Pm49FL002, 256 KB: \
Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: \
id1 0xbf, id2 0x57 Probing for PMC Pm49FL004, 512 KB: Chip lacks correct probe timing \
information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x57 Probing for \
Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0x25, id2 0x7f Probing for Spansion \
S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are \
incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI \
and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: \
skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for \
SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are \
incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI \
and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: \
skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for \
SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are \
incompatible. Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x25, id2 0x7f
Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xbf, id2 0x57
Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xbf, id2 0x57
Probing for SST SST29EE020A, 256 KB: Chip lacks correct probe timing information, \
using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x57 Probing for SST SST29LE020, \
256 KB: probe_jedec: id1 0xbf, id2 0x57 Probing for SST SST39SF010A, 128 KB: \
probe_jedec: id1 0xbf, id2 0x57 Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 \
0xbf, id2 0x57 Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0xbf, id2 0x57
Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0xbf, id2 0x57
Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xbf, id2 0x57
Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0xbf, id2 0x57
Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0xbf, id2 0x57
Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xbf, id2 0x57
Probing for SST SST49LF002A/B, 256 KB: Chip lacks correct probe timing information, \
using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x57 Lock status for 0x000000 \
(size 0x004000) is 00, full access Lock status for 0x004000 (size 0x004000) is 00, \
full access Lock status for 0x008000 (size 0x004000) is 01, write locked
Lock status for 0x00c000 (size 0x004000) is 00, full access
Lock status for 0x010000 (size 0x004000) is 01, write locked
Lock status for 0x014000 (size 0x004000) is 00, full access
Lock status for 0x018000 (size 0x004000) is 01, write locked
Lock status for 0x01c000 (size 0x004000) is 00, full access
Lock status for 0x020000 (size 0x004000) is 01, write locked
Lock status for 0x024000 (size 0x004000) is 00, full access
Lock status for 0x028000 (size 0x004000) is 01, write locked
Lock status for 0x02c000 (size 0x004000) is 00, full access
Lock status for 0x030000 (size 0x004000) is 01, write locked
Lock status for 0x034000 (size 0x004000) is 00, full access
Lock status for 0x038000 (size 0x004000) is 01, write locked
Lock status for 0x03c000 (size 0x004000) is 00, full access
Found chip "SST SST49LF002A/B" (256 KB, FWH) at physical address 0xfffc0000.
Probing for SST SST49LF003A/B, 384 KB: Chip lacks correct probe timing information, \
using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x57 Probing for SST \
SST49LF004A/B, 512 KB: Chip lacks correct probe timing information, using default \
10mS/40uS. probe_jedec: id1 0xbf, id2 0x57 Probing for SST SST49LF004C, 512 KB: \
probe_49lfxxxc: id1 0x25, id2 0x7f Probing for SST SST49LF008A, 1024 KB: Chip lacks \
correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 \
0x57 Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0x25, id2 0x7f
Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0xbf, id2 0x57
Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0xbf, id2 0x57
Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0xbf, id2 0x57
Probing for SST SST49LF040B, 512 KB: Chip lacks correct probe timing information, \
using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x57 Probing for SST SST49LF080A, \
1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. \
probe_jedec: id1 0xbf, id2 0x57 Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: \
id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and \
chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host \
bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 \
KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing \
for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are \
incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip \
bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type \
Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: \
skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST \
M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are \
incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip \
bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type \
Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: \
skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST \
M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are \
incompatible. Probing for ST M29F002B, 256 KB: Chip lacks correct probe timing \
information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x57 Probing for ST \
M29F002T/NT, 256 KB: Chip lacks correct probe timing information, using default \
10mS/40uS. probe_jedec: id1 0xbf, id2 0x57 Probing for ST M29F040B, 512 KB: \
probe_29f040b: id1 0x25, id2 0x7f Probing for ST M29F400BT, 512 KB: probe_m29f400bt: \
id1 0x25, id2 0x2d Probing for ST M29W010B, 128 KB: Chip lacks correct probe timing \
information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x57 Probing for ST \
M29W040B, 512 KB: Chip lacks correct probe timing information, using default \
10mS/40uS. probe_jedec: id1 0xbf, id2 0x57 Probing for ST M50FLW040A, 512 KB: \
probe_stm50flw0x0x: id1 0xbf, id2 0x57 Probing for ST M50FLW040B, 512 KB: \
probe_stm50flw0x0x: id1 0xbf, id2 0x57 Probing for ST M50FLW080A, 1024 KB: \
probe_stm50flw0x0x: id1 0xbf, id2 0x57 Probing for ST M50FLW080B, 1024 KB: \
probe_stm50flw0x0x: id1 0xbf, id2 0x57 Probing for ST M50FW002, 256 KB: \
probe_49lfxxxc: id1 0x25, id2 0x7f Probing for ST M50FW016, 2048 KB: probe_82802ab: \
id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x25, id2 0x7f
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x25, id2 0x7f
Probing for ST M50LPW116, 2048 KB: Chip lacks correct probe timing information, using \
default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is \
normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 \
KB: Chip lacks correct probe timing information, using default 10mS/40uS. \
probe_jedec: id1 0xbf, id2 0x57 Probing for SyncMOS S29C51001T, 128 KB: Chip lacks \
correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 \
0x57 Probing for SyncMOS S29C51002T, 256 KB: Chip lacks correct probe timing \
information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x57 Probing for \
SyncMOS S29C51004T, 512 KB: Chip lacks correct probe timing information, using \
default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x57 Probing for TI TMS29F002RB, 256 \
KB: Chip lacks correct probe timing information, using default 10mS/40uS. \
probe_jedec: id1 0xbf, id2 0x57 Probing for TI TMS29F002RT, 256 KB: Chip lacks \
correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 \
0x57 Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus \
type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type \
Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: \
skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for \
Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are \
incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and \
chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: Chip lacks \
correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 \
0x57 Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0xbf, id2 0x57
Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0xbf, id2 0x57
Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because \
the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c \
W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: \
probe_jedec: id1 0xbf, id2 0x57 Probing for Winbond W39V040B, 512 KB: probe_jedec: \
id1 0xbf, id2 0x57 Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0xbf, \
id2 0x57 Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0xbf, id2 0x57
Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xbf, id2 0x57
Probing for Winbond W49F002U, 256 KB: Chip lacks correct probe timing information, \
using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x57 Probing for Winbond \
W49V002A, 256 KB: probe_jedec: id1 0xbf, id2 0x57 Probing for Winbond W49V002FA, 256 \
KB: Chip lacks correct probe timing information, using default 10mS/40uS. \
probe_jedec: id1 0xbf, id2 0x57 Probing for Winbond W39V080FA, 1024 KB: \
probe_winbond_fwhub: id1 0xbf, id2 0x57 Probing for Winbond W39V080FA (dual mode), \
512 KB: probe_winbond_fwhub: id1 0xbf, id2 0x57 Probing for Atmel unknown Atmel SPI \
chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. \
Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip \
bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: \
skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for \
PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI \
are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type \
Non-SPI and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 \
KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. No \
operations were specified.
["lspci-nnvvvxxx.txt" (text/plain)]
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub \
Interface [8086:2570] (rev 02) Subsystem: Giga-byte Technology GA-8IPE1000 Pro2 \
motherboard (865PE) [1458:2570] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- \
VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- \
FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: \
0 Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Capabilities: [e4] Vendor Specific Information: Len=06 <?>
Capabilities: [a0] AGP version 3.0
Status: RQ=32 Iso- ArqSz=2 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ \
Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00: 86 80 70 25 06 00 90 20 02 00 00 06 00 00 00 00
10: 08 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 70 25
30: 00 00 00 00 e4 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 02 08 00 40 80 1c 00 00 00 00 00 00 00 00 00
60: 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 10 11 11 33 00 00 00 00 00 00 00 00 00 0a 38 00
a0: 02 00 30 00 1b 4a 00 1f 02 03 00 00 00 00 00 00
b0: 80 00 00 00 00 00 00 00 00 00 10 30 10 10 00 00
c0: 00 00 00 00 00 40 0d 04 00 00 00 00 00 00 00 00
d0: 02 28 04 0e 0b 0d 00 00 00 00 00 00 00 00 20 01
e0: 00 00 00 00 09 a0 06 21 00 02 00 00 00 00 00 00
f0: 00 00 00 00 02 00 00 00 68 0f 03 00 00 00 00 00
00:01.0 PCI bridge [0604]: Intel Corporation 82865G/PE/P PCI to AGP Controller \
[8086:2571] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ \
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- \
66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- \
INTx- Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00009000-00009fff
Memory behind bridge: f0000000-f1ffffff
Prefetchable memory behind bridge: d0000000-efffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ \
<SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00: 86 80 71 25 07 01 a0 00 02 00 04 06 00 40 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 20 90 90 a0 22
20: 00 f0 f0 f1 00 d0 f0 ef 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0c 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 68 0f 03 00 00 00 00 00
00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P Processor to I/O \
Memory Interface [8086:2576] (rev 02) Control: I/O- Mem+ BusMaster- SpecCycle- \
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- \
UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- \
Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]
00: 86 80 76 25 02 00 80 00 02 00 80 08 00 00 00 00
10: 00 00 cf fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 40 65 00 04 00 00 00 00 04 00 00 00 00 00 00 00
50: 01 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 55 05 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 20 08 00
b0: 00 00 00 00 f0 43 fc 7d 01 00 00 00 09 00 00 00
c0: 00 08 00 00 24 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 ff ff ff ff ff ff ff 3f
e0: 01 00 00 00 00 00 01 02 ff 0e 00 00 00 00 04 00
f0: 00 0c 02 00 00 00 00 00 68 0f 03 00 74 f8 00 00
00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI \
Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI]) Subsystem: Giga-byte \
Technology GA-8IPE1000/8KNXP motherboard [1458:24d2] Control: I/O+ Mem- BusMaster+ \
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- \
66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- \
INTx- Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at bc00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00: 86 80 d2 24 05 00 80 02 02 00 03 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 bc 00 00 00 00 00 00 00 00 00 00 58 14 d2 24
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00
00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI \
Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI]) Subsystem: Giga-byte \
Technology GA-8IPE1000 Pro2 motherboard (865PE) [1458:24d2] Control: I/O+ Mem- \
BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- \
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- \
>SERR- <PERR- INTx- Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at b000 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00: 86 80 d4 24 05 00 80 02 02 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 b0 00 00 00 00 00 00 00 00 00 00 58 14 d2 24
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00
00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI \
Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI]) Subsystem: Giga-byte \
Technology GA-8IPE1000 Pro2 motherboard (865PE) [1458:24d2] Control: I/O+ Mem- \
BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- \
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- \
>SERR- <PERR- INTx- Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b400 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00: 86 80 d7 24 05 00 80 02 02 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 b4 00 00 00 00 00 00 00 00 00 00 58 14 d2 24
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 03 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00
00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI \
Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI]) Subsystem: Giga-byte \
Technology GA-8IPE1000 Pro2 motherboard (865PE) [1458:24d2] Control: I/O+ Mem- \
BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- \
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- \
>SERR- <PERR- INTx- Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at b800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00: 86 80 de 24 05 00 80 02 02 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 b8 00 00 00 00 00 00 00 00 00 00 58 14 d2 24
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00
00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI \
Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology \
GA-8IPE1000 Pro2 motherboard (865PE) [1458:5006] Control: I/O- Mem+ BusMaster+ \
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ \
66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- \
INTx- Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at f2100000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00: 86 80 dd 24 06 00 90 02 02 20 03 0c 00 00 00 00
10: 00 00 10 f2 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 06 50
30: 00 00 00 00 50 00 00 00 00 00 00 00 06 04 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 c2 c9 00 00 00 00 0a 00 a0 20 00 00 00 00
60: 20 20 ff 01 00 00 00 00 01 00 00 00 00 00 08 c0
70: 00 00 d5 3f 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 55 55 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 80 00 00 88 83 40 00 66 0f 04 00 06 14 00 00
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) \
(prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- \
VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- \
FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: \
0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: f2000000-f20fffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ \
<SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00: 86 80 4e 24 07 01 80 00 c2 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 20 a0 a0 80 22
20: 00 f2 00 f2 f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00
40: 02 28 30 76 00 00 00 00 00 00 00 00 00 00 00 00
50: 26 64 73 00 00 00 00 00 50 01 34 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 01 00 02 00 00 00 c0 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 51 33
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface \
Bridge [8086:24d0] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- \
VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- \
FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- \
Latency: 0 Kernel modules: iTCO_wdt, intel-rng
00: 86 80 d0 24 0f 00 80 02 02 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 10 00 00 10 00 00 00 00 00 00 00 00 00 01 00
50: 00 00 00 00 00 00 00 00 81 10 00 00 10 00 00 00
60: 85 89 8b 8b d0 00 00 00 8a 80 80 86 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: d5 54 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 20 02 00 00 00 00 00 00 0d 00 00 00 00 03 00 00
b0: 00 00 00 00 00 00 00 00 55 65 55 59 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 86 21 02 00 02 0f 00 00 04 00 00 00 00 00 00 00
e0: 10 00 00 c0 00 00 07 34 33 22 11 00 00 00 67 45
f0: 00 00 42 00 04 00 00 00 66 0f 04 3e 00 00 00 00
00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller \
[8086:24d1] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Giga-byte Technology \
GA-8IPE1000 Pro2 motherboard (865PE) [1458:24d1] Control: I/O+ Mem- BusMaster+ \
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- \
66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- \
INTx+ Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f000 [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00: 86 80 d1 24 05 00 a8 02 02 8a 01 01 00 00 00 00
10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
20: 01 f0 00 00 00 00 00 00 00 00 00 00 58 14 d1 24
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00
40: 07 e3 07 a3 00 00 00 00 05 00 01 01 00 00 00 00
50: 00 00 00 00 f0 50 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 06 00 13 00 20 00 00 00 00 00 00 00 00 00 00 00
a0: 68 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00
00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller \
[8086:24d3] (rev 02) Subsystem: Giga-byte Technology GA-8IPE1000 Pro2 motherboard \
(865PE) [1458:24d2] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- \
ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- \
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed \
to IRQ 17 Region 4: I/O ports at 1400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00: 86 80 d3 24 01 00 80 02 02 00 05 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 14 00 00 00 00 00 00 00 00 00 00 58 14 d2 24
30: 00 00 00 00 00 00 00 00 00 00 00 00 09 02 00 00
40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) \
AC'97 Audio Controller [8086:24d5] (rev 02) Subsystem: Giga-byte Technology \
GA-8IPE1000/8KNXP motherboard [1458:a002] Control: I/O+ Mem+ BusMaster+ SpecCycle- \
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- \
UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- \
Latency: 0 Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at d800 [size=256]
Region 1: I/O ports at dc00 [size=64]
Region 2: Memory at f2101000 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at f2102000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
00: 86 80 d5 24 07 00 90 02 02 00 01 04 00 00 00 00
10: 01 d8 00 00 01 dc 00 00 00 10 10 f2 00 20 10 f2
20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 02 a0
30: 00 00 00 00 50 00 00 00 00 00 00 00 09 02 00 00
40: 09 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 c2 c9 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 AP [Radeon 9600] \
[1002:4150] (prog-if 00 [VGA controller]) Subsystem: Giga-byte Technology Device \
[1458:4022] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- \
Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- \
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2000ns \
min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at f1000000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at f0000000 [disabled] [size=128K]
Capabilities: [58] AGP version 3.0
Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ \
Rate=x4,x8 Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: radeonfb
00: 02 10 50 41 07 00 b0 02 00 00 00 03 08 20 80 00
10: 08 00 00 d0 01 90 00 00 00 00 00 f1 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 22 40
30: 00 00 00 00 58 00 00 00 00 00 00 00 05 01 08 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 22 40
50: 01 00 02 06 00 00 00 00 02 50 30 00 1b 02 00 ff
60: 02 43 00 1f 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01:00.1 Display controller [0380]: ATI Technologies Inc RV350 AP [Radeon 9600] \
(Secondary) [1002:4170] Subsystem: Giga-byte Technology Device [1458:4023]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- \
FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- \
<TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2000ns min), Cache Line Size: 32 \
bytes Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Region 1: Memory at f1010000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00: 02 10 70 41 07 00 b0 02 00 00 80 03 08 20 00 00
10: 08 00 00 e0 00 00 01 f1 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 23 40
30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 08 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 02 06 00 00 00 00 02 50 30 00 1b 02 00 ff
60: 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
02:08.0 Ethernet controller [0200]: Intel Corporation 82562EZ 10/100 Ethernet \
Controller [8086:1050] (rev 02) Subsystem: Giga-byte Technology Device [1458:3013]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- \
FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- \
<TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2000ns min, 14000ns max), Cache \
Line Size: 32 bytes Interrupt: pin A routed to IRQ 20
Region 0: Memory at f2000000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at a000 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: e100
Kernel modules: e100
00: 86 80 50 10 07 00 90 02 02 00 00 02 08 20 00 00
10: 00 00 00 f2 01 a0 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 13 30
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0a 01 08 38
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 22 fe
e0: 00 40 00 3a 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00
["superiotool-deV.txt" (text/plain)]
superiotool r5263
Probing for ALi Super I/O at 0x3f0...
Failed. Returned data: id=0xffff, rev=0xff
Probing for ALi Super I/O at 0x370...
Failed. Returned data: id=0xffff, rev=0xff
Probing for Fintek Super I/O at 0x2e...
Failed. Returned data: vid=0xffff, id=0xffff
Probing for Fintek Super I/O at 0x4e...
Failed. Returned data: vid=0xffff, id=0xffff
Probing for ITE Super I/O (init=standard) at 0x2e...
Found ITE IT8712F (id=0x8712, rev=0x5) at 0x2e
Register dump:
idx 20 21 22 23 24 2b
val 87 12 05 40 00 00
def 87 12 08 00 00 00
LDN 0x00 (Floppy)
idx 30 60 61 70 74 f0 f1
val 00 00 00 00 04 00 00
def 00 03 f0 06 02 00 00
LDN 0x01 (COM1)
idx 30 60 61 70 f0 f1 f2 f3
val 01 03 f8 04 00 50 00 7f
def 00 03 f8 04 00 50 00 7f
LDN 0x02 (COM2)
idx 30 60 61 70 f0 f1 f2 f3
val 01 02 f8 03 00 50 00 7f
def 00 02 f8 03 00 50 00 7f
LDN 0x03 (Parallel port)
idx 30 60 61 62 63 70 74 f0
val 01 03 78 07 78 07 03 0b
def 00 03 78 07 78 07 03 03
LDN 0x04 (Environment controller)
idx 30 60 61 62 63 70 f0 f1 f2 f3 f4 f5 f6
val 01 02 90 00 00 00 08 08 0e 00 01 00 4d
def 00 02 90 02 30 09 00 00 00 00 00 NA NA
LDN 0x05 (Keyboard)
idx 30 60 61 62 63 70 71 f0
val 01 00 60 00 64 01 02 68
def 01 00 60 00 64 01 02 08
LDN 0x06 (Mouse)
idx 30 70 71 f0
val 01 0c 02 00
def 00 0c 02 00
LDN 0x07 (GPIO)
idx 25 26 27 28 29 2a 2c 60 61 62 63 64 65 70 71 72 73 74 b0 b1 b2 b3 b4 b5 b8 b9 \
ba bb bc bd c0 c1 c2 c3 c4 c8 c9 ca cb cc e0 e1 e2 e3 e4 f0 f1 f2 f3 f4 f5 f6 f7 \
f8 f9 fa fb fc fd val 00 00 20 02 08 00 00 00 00 08 00 00 00 00 00 00 00 04 00 00 \
00 00 00 00 00 00 20 02 00 00 00 00 00 00 08 00 00 00 00 00 00 00 00 00 00 10 40 \
00 00 00 21 1d 00 00 00 00 00 0e 00 def 01 00 00 40 00 00 00 00 00 00 00 00 00 00 \
00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 40 00 01 00 00 40 00 00 \
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 NA 00 LDN 0x08 (MIDI port)
idx 30 60 61 70 f0
val 00 00 00 00 00
def 00 03 00 0a 00
LDN 0x09 (Game port)
idx 30 60 61
val 00 00 00
def 00 02 01
LDN 0x0a (Consumer IR)
idx 30 60 61 70 f0
val 00 03 10 0b 06
def 00 03 10 0b 00
Environment controller (0x0295)
Probing for ITE Super I/O (init=it8761e) at 0x2e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8228e) at 0x2e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=standard) at 0x4e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8761e) at 0x4e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8228e) at 0x4e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=legacy/it8661f) at 0x370...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=legacy/it8671f) at 0x370...
Failed. Returned data: id=0xffff, rev=0xf
Probing for NSC Super I/O at 0x2e...
Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x4e...
Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x15c...
Failed. Returned data: port=0xff, port+1=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
Failed. Returned data: id=0xff, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x2e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x2e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x4e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x4e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x3f0...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x3f0...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for VIA Super I/O at 0x3f0...
PCI device 1106:0686 not found.
_______________________________________________
flashrom mailing list
flashrom@flashrom.org
http://www.flashrom.org/mailman/listinfo/flashrom
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic