[prev in list] [next in list] [prev in thread] [next in thread]
List: firewall-1
Subject: re:[FW1] problems with securemote and xircom
From: Paul.ABELN () plantronics ! com (Paul ABELN)
Date: 1999-08-31 16:19:16
[Download RAW message or body]
Micha,
Try this to get SecuRemote working properly:
If the notebooks need to access your internal network when they are remotely
connected to the Internet the SecuRemote client should be installed on the Dial
Up adapter only. When prompted during the SecuRemote installation to install on
All Network adapters (or) on the Dial Up adapters only, select Dial Up adapters
only. This way there is no binding FW1 to the ethernet adapter.
If this approach doesn't solve the problem, do this:
Take a good look at Network Properties before you run the SecuRemote
installation. When prompted to install on All Network adapters select OK. When
the SecuRemote installation is complete you are prompted to reboot your laptop.
Select NO and immediately go to the Network Properties. Manually remove the FW1
bindings that you don't need. Now reboot.
SecuRemote chokes upon boot if it cannot perform all the bindings you see in
Network Properties. Sometimes (especially with AOL) this second approach is the
only way to get the bindings you really need.
Micha Borrmann wrote:
Hello,
there are digital notebooks HiNote Ultra2000 running windows NT
workstation
(german, SP4). These notebooks are including Xircom Ethernet
10/100 + Modem
56k card. This is not an PCMCIA card, it is static in the notebook.
The notebook works fine. After I was install securemote (4.005) it is
possible to get access through firewalls, but the Ethernet
dosn't work! The
modem works without any errors, but it is not possible to use
the Ethernet.
If I uninstall securemote, Ethernet and modem are working correctly.
if securemote is not installed on the notebook, ipconfig /all produce:
Windows NT IP-Konfiguration
Host-Name . . . . . . . . . : larissa.interact.de
DNS-Server. . . . . . . . . : 192.168.0.1
Knotentyp . . . . . . . . . : Peer-Peer
NetBIOS-Bereichs-ID . . . . :
IP-Routing aktiviert. . . . : Nein
WINS-Proxy aktiviert. . . . : Nein
NetBIOS-Auswertung mit DNS : Nein
Ethernet-Adapter NdisWan4:
Beschreibung. . . . . . . . : NdisWan Adapter
Physische Adresse . . . . . : 00-00-00-00-00-00
DHCP aktiviert. . . . . . . : Nein
IP-Adresse. . . . . . . . . : 0.0.0.0
Subnet Mask . . . . . . . . : 0.0.0.0
Standard-Gateway. . . . . . :
Ethernet-Adapter CEM561:
Beschreibung. . . . . . . . : Xircom Ethernet 10/100 + Modem 56
Physische Adresse . . . . . : 00-80-C7-3E-62-E2
DHCP aktiviert. . . . . . . : Ja
IP-Adresse. . . . . . . . . : 192.168.0.185
Subnet Mask . . . . . . . . : 255.255.255.0
Standard-Gateway. . . . . . : 192.168.0.1
DHCP-Server . . . . . . . . : 192.168.0.1
Primärer WINS-Server. . . . : 192.168.0.1
Sekundärer WINS-Server. . . : 192.168.0.2
Lease erhalten. . . . . . . : Dienstag, 31. August 1999 10:22:07
Lease läuft ab. . . . . . . : Dienstag, 31. August 1999
15:22:07
if securemote is installed, the part in ipconfig /all with the Ethernat
Adapter failed. The system starts with the error: one service couldn't
startet, have a look in the event viewer. In the eventviewer,
there is an
error message.
source: FW1, event: 1
description: FW1: FwOpenAdapter: Adapter Not Found
also there is an information message in the eventviewer
source: FW1, event: 2
description: FW1: Attached to \Device\NdisWan4
What can I do to use securemote and the Ethernet with these notebook?
Micha Borrmann
Systemadministrator, CCSE
INTERACTIVE Online Services I.O.S. GmbH
Kedenburgstrasse 44 - 22041 Hamburg - Germany
Hamburg-Muenchen-Wiesbaden
E-Mail: mailto:mb@interact.de RIPE-Handle : MB1
URL : http://www.interact.de/ INTERNIC-Handle: MB16858
phone : +49.40.65699045
fax : +49.40.65699040
Reinventing Today's Communication
________________________________________________________________
Paul Abeln Plantronics, Inc.
Senior Network Engineer 345 Encinal Street
paul.abeln@plantronics.com Santa Cruz, CA 95061-0635
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic