[prev in list] [next in list] [prev in thread] [next in thread]
List: festlang-talk
Subject: [festival-talk] Changing Sample Rates
From: dbrown () comcen ! com ! au (David & Margaret Brown)
Date: 2006-03-24 8:46:52
Message-ID: 4423B1FC.2020604 () comcen ! com ! au
[Download RAW message or body]
message from David & Margaret Brown <dbrown at comcen.com.au> to festival-talk
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
There seems to be two parameters that may be set from a voice .scm file
that is provided to festival e.g
(samplerate 22050) in mwm5_diphone.scm, or
(samp_freq 16000) in mwm_diphone.scm.
I have found that (at least on my two festival compilations) that
changing the value in these voices (the only two I have tried this on)
has no effect. Further, I have been unable to track down where in the
program they are read and used (if at all!).
My compilations were built in Visual C++, using projects I manually
built (and numerous changes to code to bring it into line with both
accepted standards and Microsoft's compiler). They also include my
extended Flinger module. One is based on festival & speech tools 1.42,
the other 1.96.
Any views on this, anyone?
Dave Brown
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
= University of Edinburgh's Festival Speech Synthesis System =
= http://festvox.org/festival Sent Via festival-talk at festvox.org =
= To unsubscribe mail majordomo at festvox.org =
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic