[prev in list] [next in list] [prev in thread] [next in thread] 

List:       fedora-list
Subject:    Re: How Do I?
From:       Gene Heskett <gene.heskett () verizon ! net>
Date:       2006-07-03 2:19:08
Message-ID: 44A87E9C.4030402 () verizon ! net
[Download RAW message or body]

Eugene Poole wrote:
> First, let me give thanks to all who gave me answers on my xcdroast issue.
> 
> This time I don't have a problem, more of a situation.
> 
> I currently run FC4 with 2-disk drives, a 80-gig and a 15-gig.  I caught 
> a great deal on a 300-gig drive and I want to swap out the 15-gig for 
> the 300-gig.  What's on the 15-gig scares me a little:
>    /dev/hdc1      4031 1m blks      /u03 - user data and database files
>    /dev/hdc2      4031 1m blks      /u02 - user data and database files
>    /dev/hdc3      2023 1m blks      swap
>    /dev/hdc5      2023 1m blks      /u04 - user data and database files
>    /dev/hdc6        478 1m blks      /opt
>    /dev/hdc7      1490 1m blks      /var
>    /dev/hdc4                                 standard extended partition 
> boundary that covers hdc5, hdc6, and hdc7
> 
> Is there a way to do this without having to reinstall FC4?  Where can I 
> find the documentation?  Any thoughts would be appreciated.

Sure.  First, install the disk as /dev/hdd, the secondary (slave) drive 
on the 2nd cable, s/b the middle plug.  Do this while powered down, and 
reboot.

Then run 'fdisk /dev/hdd', and assign, but do not label, a set of 
partitions to match the above but with sufficiently different names that 
you can readily identify which partition (/dev/hdd7) is var2, and 
establish those in the /etc/fstab file using these names.  Size them 
roughly in proportion to the /dev/hdc versions but scaled up (except for 
the swap and /var2, which need be no bigger than a gig for swap, and 
maybe 2 gigs for the second var2), using the space basicly to expand the 
user partitions.  Exit fdisk with a w, and rerun it to verify the table, 
then quit it again.  Then do the mke2fs on those partitions where its 
suitable, and a mkswap on the new /swap.

Now make new /mnt/hdd/$newnames entries to match the ones you added in 
/etc/fstab.  Mount each of them to /dev/hdd/$newname, and concoct an 
rsync command line to copy each of the existing /dev/hdc partitions to 
the new ones on /mnt/hdd/$newname.  I think, but don't take it as 
gospel, that rsync -avc /src/path /dest/path is a good starting point. 
This will take a while, and the users should be off-duty/locked out by 
some means while this is taking place.

Now, before the data changes in /var by more activity, edit /etc/fstab 
to remove the extra hdd entries with a comment, power down, remove hdc, 
and change hdd to be the master drive and on the end of the cable, 
effectively it will become /dev/hdc.  When you power back up, it should 
just be there.

> Gene

-- 
Cheers, Gene

-- 
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
[prev in list] [next in list] [prev in thread] [next in thread]