[prev in list] [next in list] [prev in thread] [next in thread] 

List:       fedora-arm
Subject:    [fedora-arm] Guruplug | uaputl fail
From:       Bernhard Schuster <schuster.bernhard () googlemail ! com>
Date:       2010-08-10 21:57:43
Message-ID: AANLkTinu4TAsu6QLAdogZ6D-f9YjrPDkfKLPOMG9bSGS () mail ! gmail ! com
[Download RAW message or body]

[Attachment #2 (multipart/alternative)]


Has anyone stumbled upon uaputl failing to bss_start? Everything else works
as it seems.

[root@fedora-arm home]# uaputl sys_cfg_radio_ctl 0
Radio setting successful
[root@fedora-arm home]# uaputl sys_cfg_channel 5
Channel setting successful
[root@fedora-arm home]# uaputl sys_cfg_ssid "dummyssid"
SSID setting successful
[root@fedora-arm home]# uaputl sys_cfg_protocol 32
protocol setting successful
[root@fedora-arm home]# uaputl sys_cfg_cipher 8 8
cipher setting successful
[root@fedora-arm home]# uaputl sys_cfg_wpa_passphrase "dummypasswd"
WPA passphrase setting successful
[root@fedora-arm home]# uaputl bss_start
ERR:UAP_BSS_CTRL fail, result=0
ERR:Could not start BSS!

ifconfig uap0
      Link encap:Ethernet  HWaddr 00:24:23:1F:B1:7B
      UP BROADCAST MULTICAST  MTU:1500  Metric:1
      RX packets:0 errors:0 dropped:0 overruns:0 frame:0
      TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:1000
      RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

Some uaputl <option> give ERR: not supported "blah".

any ideas?

Note: I compiled a patched kernel (based on vanilla 2.6.34.1) with full
support for libertas_uap, kopied the mrvl firmware folder from the debian
rootfs over to my SDHC card, copied uaputl from the debian rootfs, did
modules_install firmware_install header_install and blacklisted libertas and
libertas_sdio to prevent them hogging the hardware before libertas_uap comes
onto the playfield.

Help is very much appreaciate. If required  I can "send"(torrent or alike)
the full image (~15GiB), the KernelBuild env, uImage and modules.

Thanks for any help or tipps

Regards

Bernhard

[Attachment #5 (text/html)]

Has anyone stumbled upon uaputl failing to bss_start? Everything else works as it \
seems.<div><br></div><div><div>[root@fedora-arm home]# uaputl sys_cfg_radio_ctl \
0</div><div>Radio setting successful</div><div>[root@fedora-arm home]# uaputl \
sys_cfg_channel 5</div> <div>Channel setting successful</div><div>[root@fedora-arm \
home]# uaputl sys_cfg_ssid &quot;dummyssid&quot;</div><div>SSID setting \
successful</div><div>[root@fedora-arm home]# uaputl sys_cfg_protocol \
32</div><div>protocol setting successful</div> <div>[root@fedora-arm home]# uaputl \
sys_cfg_cipher 8 8</div><div>cipher setting successful</div><div>[root@fedora-arm \
home]# uaputl sys_cfg_wpa_passphrase &quot;dummypasswd&quot;</div><div>WPA passphrase \
setting successful</div> <div>[root@fedora-arm home]# uaputl \
bss_start</div><div>ERR:UAP_BSS_CTRL fail, result=0</div><div>ERR:Could not start \
BSS!</div></div><div><br></div><div>ifconfig uap0</div><div>          Link \
encap:Ethernet   HWaddr 00:24:23:1F:B1:7B   </div> <div><div>          UP BROADCAST \
MULTICAST   MTU:1500   Metric:1</div><div>          RX packets:0 errors:0 dropped:0 \
overruns:0 frame:0</div><div>          TX packets:0 errors:0 dropped:0 overruns:0 \
carrier:0</div><div>          collisions:0 txqueuelen:1000  </div> <div>          RX \
bytes:0 (0.0 b)   TX bytes:0 (0.0 b)</div></div><div><br></div><div>Some uaputl \
&lt;option&gt; give ERR: not supported &quot;blah&quot;.</div><div><br></div><div>any \
ideas?  </div><div><br></div><div>Note: I compiled a patched kernel (based on vanilla \
2.6.34.1) with full support for libertas_uap, kopied the mrvl firmware folder from \
the debian rootfs over to my SDHC card, copied uaputl from the debian rootfs, did \
modules_install firmware_install header_install and blacklisted libertas and \
libertas_sdio to prevent them hogging the hardware before libertas_uap comes onto the \
playfield.</div> <div><br></div><div>Help is very much appreaciate. If required   I \
can &quot;send&quot;(torrent or alike) the full image (~15GiB), the KernelBuild env, \
uImage and modules.</div><div><br></div><div>Thanks for any help or tipps</div> \
<div><br></div><div>Regards</div><div><br></div><div>Bernhard</div><div><br></div>



_______________________________________________
arm mailing list
arm@lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/arm

[prev in list] [next in list] [prev in thread] [next in thread]